• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.223-224
• /
• 2021

Recently, the demand for high fluidity concrete has been increased due to skyscrapers. However, it has its own limits. First of all, high fluidity concrete has large variation and through trial & error it costs lots of money and time. Neural network model has repetitive learning process which can solve the problem while training the data. Therefore, the purpose of this study is to predict optimum mix design of 40MPa, 60MPa high fluidity concrete by using neural network model and verifying compressive strength by applying real data. As a result, comparing collective data and predicted compressive strength data using MATLAB, 40MPa mix design error rate was 1.2%~1.6% and 60MPa mix design error rate was 2%~3%. Overall 40MPa mix design error rate was less than 60MPa mix design error rate.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1412-1419
• /
• 2002

Dynamic shear tests for the tough-pitch copper at high strain and high strain rate was performed. The Split Hopkinson Pressure Bar (SHPB) compression test system was modified to yield a shear deformation in the specimen. Hat-shaped specimens for the tough-pitch copper were adopted to generate high strain of γ=3～4 and high strain-rate of γ= 10$^4$/s. The dynamic analysis by ABAQUS 5.5/EXPLICIT code verified that shear zone can be localized in hat-shaped specimens. A proper impact velocity and the axial length of the shear localization region wert determined through the elastic wave analysis. The displacement in a hat-shaped specimen is limited by a spacer ring which was installed between the specimen and the incident bar. The shear bands were obtained by measuring the direction of shear deformation and the width of deformed grain in the shear zone. The decrease of specimen length has been measured on the optical displacement transducer. Dynamic shear stress-strain relations in the tough-pitch copper were obtained at two strain-rates.

• Journal of the Korean Society of Combustion
• /
• v.8 no.4
• /
• pp.9-14
• /
• 2003

High temperature air combustion technology has been utilized by using preheated air over 1100 K and excessive exhaust gas recirculation. Numerical analysis was performed to investigate the combustion characteristics with high temperature deficient oxygen air combustion by adopting a counterflow as a model problem accounting for detailed chemical kinetics. Methane($CH_4$) was used as a test fuel and calculated oxidizer conditions were low temperature high oxygen (300K, $X_{O2}=0.21$) and high temperature low oxygen (1300K, $X_{O2}=0.04$) conditions. The latter case showed that the flame temperature is lower than the former case and its profile showed monotonic decrease from oxidizer to fuel side, without having local maximum flame temperature at high stretch rate. Also, heat release rate was one order lower and it has one peak profile because of low oxygen concentration and heat release rate integral is almost same for stretch rate. High temperature low oxygen air combustion shows low NO emission characteristics.

• Korean Journal of Health Education and Promotion
• /
• v.26 no.1
• /
• pp.105-115
• /
• 2009

Objectives: This study was conducted to assess dental health states of disabled people and analyze association between perception and awareness toward dental health and dental health status. Methods: The survey was performed from June 25 through October 30, 2004. A total of 548 disabled people participated in the study with details of 419 living in eight residential care centers located in Gyeongsangbuk-do and 129 children from a special school and two day-care centers. All subjects underwent oral examination and surveyed through a questionnaire. Parents of 129 children with disabilities were also surveyed through a separate questionnaire. Results: The dental caries experience rate was 82.1% of total 548 subjects. By age, those in their 20s experienced a high rate of dental caries with 87.5%. By educational level, those with a middle school education experienced a high dental caries rate with 91.8% (p<0.05). Of total subjects who experienced dental caries, 78.9% had experience in dental caries treatment. By age, those in their 10s showed a high rate of dental caries treatment with 87.4%(p<0.05). By educational level, those with a high school education showed a high rate of dental caries treatment with 87.7%(p<0.05). Those in residential care centers had a high rate of dental caries treatment with 82.1%, which is significantly higher than 68.8% of those who used day-care centers. A tooth extraction rate was 38.0% of total subjects. Those in their 40s had a higher rate of tooth extraction(p<0.01). Those in residental care centers had a significantly higher rate of extraction with 43.4%, compared with 20.2% of those in day-care centers. Of total subjects, 61.5% had plaque. A high rate of plaque formation was observed in those in their 40s(92.0%), those with a high school education(84.0%) and those with multiple disabilities(77.8%)(p<0.01). Among total subjects, 47.6% maintained healthy periodontal tissue. Those in their 40s and those with multiple disabilities had diseased periodontal tissue(p<0.01). Of 129 disabled children, 43.8% had plaque with parents who were not oral health-conscious while 18.6% had plaque with parents who were oral health-conscious, showing a significant difference(p<0.05) Conclusion: The results of the study suggest the need for educating parents with disabled children about oral health and strengthening programs for oral health for teachers working at special schools and day-care centers.

• Journal of the Korean Society of School Health
• /
• v.13 no.2
• /
• pp.295-317
• /
• 2000

This study was conducted to prevent oral disease of primary school, middle school, and high school students, providing basic data for the development of oral health education programs. Data were collected from 898 primary school, middle school, and high school students from March 2, 1999 to May 31, 1999. The results of this study are summarized as follows; 1) The subjects of this study were primary school students(32.6%), middle school students(33.0%), and high school students(34.4%). Boy students were slightly more prevalent than girl students. That is, primary school boys were 56.3%, middle school boys were 53.2%, and high school boys were 52.6%. 2) According to the self-judgement of oral health, primary school students were better than middle/high school students and boy students were better than girl students, 63.5% of primary school students and 57.8% of middle/high school students brushed their teeth once or twice a day. 3) 76.3% of middle/high school students and 63.5% of primary school students experienced dental caries. Girl students were higher than boy students in experiencing dental caries, 35.9% of primary school students and 27.6% of middle/high school students experienced periodontal disease. 4) 22.9% of primary school students and 7.9% of middle/high school students received oral examinations periodically. Girl students showed a higher rate than boy students in primary school, while boy students showed a higher rate than girl students in middle/high school. 5) Explaining to the reasons for reluctant visits to dental hospitals and clinics, 'no time to go' was highest(22.9% of primary school students; 27.4% of middle/high school students) and the rate of 'feeling scared' was second highest. Middle/high school students were more reluctant to visit dental hospitals and clinics than primary school students. In case of problematic symptoms in the mouth, the rate of 'feeling painful or cold in teeth when eating cold or hot foods' was highest, 71.3% of primary school students was concerned about oral health, while 68.6% of middle/high school students was concerned about it. 6) In gathering to the sources of information on oral health, the rate of medical institutions was highest(30.0%) in primary school students, while the rate of family members or persons around them was highest in middle/high school students. 7) 54.9% of primary school students received oral health education, while 13.1% of middle/high school students received it. Only 4.7% of middle school and high school girls received it. In relation to dental health education, the rate of 'possibility of prevention of oral caries or disease of the gum' was highest. 79.5% of primary school students and 80.3% of middle school students answered that they would attend oral health education. 8) 60.4% of primary school students and 60.2% of middle/high school students think the purpose of oral health is to prevent dental caries and disease of the gums. In preventing dental caries, 78.8% of primary school students and 71.8% of middle school students thought that periodical oral examination was effective, 88.4% of primary school students and 88.8% of middle/high school thought that brushing one's teeth was effective and 64.1% of primary school students and 50.7% of middle school students thought that the use of toothpaste containing fluoride was effective. In preventing periodontal disease, 91.1% of primary school students and 90.2% of middle/high school students thought that brushing one's teeth was effective, while 72.4% of primary school students and 70.3% of middle/high school students thought that teeth cleaning was effective. 9) 16.0% of middle school students and 12.7% of high school students thought that their oral health condition was healthy. According to individual experiences in dental treatment, the rate of experience of middle school students was higher than that of high school students, 12.7% of middle school students received oral examinations periodically, while only 3.3% of high school students did so. 10) In cases of 'having no problematic symptoms in the mouth' and 'concerns about oral health', the rate of middle school students was higher than that of high school students. In gathering obtaining information on oral health, the rate of obtaining it through broadcast media including TV, Radio, etc. was highest in middle school students, while the rate of obtaining it through family members or persons around them was highest in high school students. 11) 81.7% of middle school students have not received oral health education. In case of girl students, 97.3% have not received it in high school students. 85.6% of middle school students and 151.2% of high school students think that oral health education is necessary. 12) According to the knowledge level of oral health, the point of high school students($26.33{\pm}2.33$) was similar to the point of high school students($26.23{\pm}2.30$). It appeared that the point of primary school students was highest($26.35{\pm}2.50$) The more concerned about oral health the students were the higher the knowledge level of oral health was. In conclusion, the middle/high school students' knowledge level of oral health was lower than primary school students. The rate of middle/high School students' experience in oral health education was too low. Therefore, it is necessary to intensify oral health education for middle/high school students. Especially, the necessity of oral health education to girl students is strongly recommended. Developing an oral health education program for primary school, middle school, and high school students, related public authority and organizations, teachers; and dentists must actively make efforts together in order to maintain healthy teeth through having students prevent dental caries and periodontal disease.

• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.179-184
• /
• 2013

The biological effects of radiation are dependent on the dose rate and dose of radiation. In this study, effects of dose and dose rate using whole body radiation on plasma cytokines and blood count from male BALB/c mice were evaluated. We examined the blood and cytokine changes in mice exposed to a low (3.49m Gy $h^{-1}$) and high (2.6 Gy $min^{-1}$) dose rate of radiation at a total dose of 0.5 and 2 Gy, respectively. Blood from mice exposed to radiation were evaluated using cytokine assays and complete blood count. Peripheral lymphocytes and neutrophils decreased in a dose dependent manner following high dose rate radiation. The peripheral lymphocytes population remained unchanged following low dose rate radiation; however, the neutrophils population increased after radiation. The sera from these mice exhibited elevated levels of flt3 ligand and granulocyte-colony-stimulating factor (G-CSF), after high/low dose rate radiation. These results suggest that low-dose-rate radiation does not induce blood damage, which was unlike high-dose-rate radiation treatment; low-dose-rate radiation exposure activated the hematopoiesis through the increase of flt3 ligand and G-CSF.

• Composites Research
• /
• v.24 no.3
• /
• pp.12-16
• /
• 2011

High strain rate tensile tests were performed to measure the strain rate sensitivity of fiber reinforced composite material. The composite material was developed for the light weight design of an automotive FEM(front end module) carrier. Standard specimens for quasi-static tests of fiber reinforced composites can be found in ASTM D3039. However, in case of high strain rate tests, it was hard to find standard specimen shapes. In this study, three kinds of tensile specimens designed based on ASTM D638 were investigated to determined the adequate gauge width of tensile specimen for fiber reinforced composite. A drop tower type of high speed tensile apparatus was developed for strain rates of about 15/s and 100/s. Gauge width of 6mm, 8mm and 10mm were investigated. Test results showed the specimen of 8mm width was adequate for the high strain rate tensile tests of fiber reinforced composite. It was found the strength of the composite material increased as the strain rate increased.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.3
• /
• pp.209-219
• /
• 2015

The Accurate Ranging System for Geodetic Observation - Mobile (ARGO-M) was successfully developed as the first Korean mobile Satellite Laser Ranging (SLR) system in 2012, and has joined in the International Laser Ranging Service (ILRS) tracking network, DAEdeoK (DAEK) station. The DAEK SLR station was approved as a validated station in April 2014, through the ILRS station "data validation" process. The ARGO-M system is designed to enable 2 kHz laser ranging with millimeter-level precision for geodetic, remote sensing, navigation, and experimental satellites equipped with Laser Retro-reflector Arrays (LRAs). In this paper, we present the design and development of a next generation high-repetition-rate SLR system for ARGO-M. The laser ranging rate up to 10 kHz is becoming an important issue in the SLR community to improve ranging precision. To implement high-repetition-rate SLR system, the High-repetition-rate SLR operation system (HSLR-10) was designed and developed using ARGO-M Range Gate Generator (A-RGG), so as to enable laser ranging from 50 Hz to 10 kHz. HSLR-10 includes both hardware controlling software and data post-processing software. This paper shows the design and development of key technologies of high-repetition-rate SLR system. The developed system was tested successfully at DAEK station and then moved to Sejong station, a new Korean SLR station, on July 1, 2015. HSLR-10 will begin normal operations at Sejong station in the near future.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.3
• /
• pp.151-158
• /
• 1998

The inhibition rate of bacteria growth per molecular weight was higher according as the molecular weight increased, the rate was the highest at the molecular weight 200,000. Microcapsule of ionized calcium was able to be produced by molecular weight 15,000, 30,000, 50,000 and 200,000 of chitosan which was dried for 48 hours after melting it in 2% of acetic acid, adding ionized calcium and controlling pH 1.2. The size of ionized calcium microcapsule was between 200 and $300\;{\mu}m$, the solvency, concentration and the content showed big difference by the molecular weight of chitosan. The inhibition rate of bacteria growth of microcapsule designated high in Gram positive, which was high in S. aureus, S. epidermidis and Bacillus subtilis, low in S. mutans, high in C. albicans in fungi, low in A. niger. The inhibition rate of bacteria growth of chitosan was comparatively high in Gram positive, low in S. mutans and it showed high numerical value in C. albicans of fungi. The rate recorded good result at molecular weight 200,000 relatively, there was no difference according to the molecular weight. The inhibition rate of bacteria growth according to the concentration of the microcapsule increased differently between $1.000{\sim}10,000\;{\mu}g/ml$, it showed antibacterial activity close to the inhibition rate of growth of chitosan rather than ionized calcium. The minimum inhibitory concentration marked the highest in the mixture of chitosan and ionized calcium for all kind of bacteria generally, there was a little difference between yeast and fungi.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.99-107
• /
• 1997

This study was executed to test the possibility of replacement for domestic Japanese larch(Larix leptolepis) for hardwoods and to acquire the information about the effects of drying temperature on internal temperature, moisture content and drying defects. In high-temperature drying, internal temperature increased rapidly to boiling point, immediately after that point the internal temperature rising rate was reduced. In the case of drying at temperature of $125^{\circ}C$, internal temperature could reach at boiling point in a very short time. Moisture content in high-temperature drying showed constant drying rate period and first period of falling rate drying together in 4 hours since experiment begun. There was no strong correlation between initial moisture content and final moisture content. Average drying rate at $115^{\circ}C$, $120^{\circ}C$ and $125^{\circ}C$ was 1.42%/hr, 1.88%/hr and 2.02%/hr, respectively; the case of drying temperature of $125^{\circ}C$ showed most rapid drying rate. Drying rate of $125^{\circ}C$ was so rapid that it showed more severe shrinkage, bow, collapse, end check, and internal check development than in other drying conditions. The result of this study showed the strong possibility of high-temperature drying for Japanese larch, and to dry Japanese larch optimally, dry bulb temperature should not exceed $120^{\circ}C$.