• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.4
• /
• pp.180-184
• /
• 2014

In order to make clear relationship between high temperature tensile properties and fine microstructure of rapidly solidified cast-type Ni-base superalloys without heat treatment required for consolidation process, tensile test was carried out by changing strain rate from $5{\times}10^{-5}s^{-1}$ to $2{\times}10^{-2}s^{-1}$ and test temperature from $900^{\circ}C$ to $1050^{\circ}C$ using IN738LC and Rene'80 melt-spinning ribbons by twin roll process which were superior to ribbons by single roll process from the viewpoint of structure homogeneity. The dependence of tensile strength on strain rate and test temperature was studied and strain rate sensitivity, m, were estimated from tensile test results. From this study, it was found that tensile strength was influenced by ${\gamma}^{\prime}$ particle diameter, test temperature and strain rate, and m of ribbons exhibited above 0.3 over $950^{\circ}C$.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.75-80
• /
• 1981

Due to rapid industrialization and economic development, the occupational diseases have appeared as one of the social problems in Korea. Up until now little has been known about the prevalence rate, predisposing factors and symptomatology of the occupational disease due to localized vibration in Korea. The researcher intends to investigate the prevalence rate and affecting factors of the occupational disease due to localized vibration among rock-drillers in the anthracite mines. A total of 135 rock-drillers were interviewed and examined from May 15th to 31th, 1980. The results were revealed as follows; 1. The prevalence rate of the vibration syndrome among rock-drillers was 12.6%. 2. The latent period of the vibration syndrome was 6.8 years. 3. The prevalence rate of the vibration syndrome was not significantly different between smokers and non-smokers. 4. With the increase of total vibration exposure time, the prevalence rate of the vibration syndrome increased also. 5. The average vibration sensation threshold was high (6.4dB) in stage 1 of the vibration syndrome and low (-0.6dB) in stage 0. 6. The average pain sensation threshold was high (4.4g) in stage 1 of the vibration syndrome and low (2.5g) in stage 0.

• Korean Journal of Materials Research
• /
• v.27 no.7
• /
• pp.369-373
• /
• 2017

Unidirectionally solidified TiAl alloys were prepared by optically-heated floating zone method at growth rates of 10 to 70 mm/h in flowing argon. The microstructures and tensile properties of these crystal bars were found to depend strongly on the growth rate and alloy composition. TiAl alloys with composition of 47 and 50 at.%Al grown under the condition of 10 mm/h showed $Ti_3Al({\alpha}_2)/TiAl({\gamma})$ layer structures similar to single crystals. As the growth rate increased, the alloys with 47 and 50 at.%Al compositions showed columnar-grain structures. However, the alloys fabricated under the condition of 10 mm/h had a layered structure, but the alloy with increased growth rate consisted of ${\gamma}$ single phase grains. The alloy with a 53 at.%Al composition showed a ${\gamma}$ single phase regardless of the growth rate. Room-temperature tensile tests of these alloys revealed that the columnar-grained material consisting of the layered structure showed a tensile ductility of larger than 4 % and relatively high strength. The high strength is caused by stress concentration at the grain boundaries; this enhances the secondary slip or deformation twinning across the layered structure in the vicinity of the grain boundaries, resulting in the appreciable ductility.

• Journal of Surface Science and Engineering
• /
• v.24 no.3
• /
• pp.119-124
• /
• 1991

Recently, the trend of research in hard coating is concentrate on developing the process of ionization rate under low operating pressure, to get the thin film with high adhesion and dense microstructures. In this study ionization rate enhancement type PVD process using permanent magnet is developed, which enhances the ionization rate by confining the plasma suppressing the wall loss of electron. By the result to investigate the characteristic of glow discharge, the ionization rate of this process is enhanced about twice as high as that of triod BARE process (about 26%), and more dense TiN microstructures are obtained in this process. Cylindrical ion energy analyzer is made and attached in front of a quadrupole mass filter for the analysis of the energy distribution of reactive gas and activated gas ions from the plasma zone. To analyze the operation mechanism of ion energy analyzer, computer simulation is performed by calculation the electric field environment using finite element method. By these analyses of ion energy distribution of outcoming ions from the plasma zone, it is found that magnetic field enhances ion kinetic energy as well as ionization rate. The other results of this study is that the foundation of feed-back system is constructed, which automatically control the partial pressure of reactive gas. In can be possible by recording the data of mass spectrum and ion energy analysis using A-D converter.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.700-706
• /
• 2016

Etch rate, surface roughness and microstructure as plasma resistance were evaluated for six kinds of oxide glass with different compositions. Borosilicate glass (BS) was found to be etched at the highest etch rate and zinc aluminum phosphate glass (ZAP) showed a relatively lower etch rate than borosilicate. On the other hand, the etching rate of calcium aluminosilicate glass (CAS) was measured to be similar to that of sintered alumina while yttrium aluminosilicate glass (YAS) showed the lowest etch rate. Such different etch rates by mixture plasma as a function of glass compositions was dependent on whether or not fluoride compounds were formed on glass and sublimated in high vacuum. Especially, in view that $CaF_2$ and $YF_3$ with high sublimation points were formed on the surface of CAS and YAS glasses, both CAS and YAS glasses were considered to be a good candidate for protective coating materials on the damaged polycrystalline ceramics parts in semi-conductor and display processes.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.50.2-50.2
• /
• 2016

Continuous accretion of metal-poor gas can explain the discrepancy between the number of observed G-dwarfs and the number predicted by the "simple model" of galactic evolution. The maximum accretion rate estimated based upon approaching high velocity clouds (HVCs) can be up to ${\sim}0.4M_{\odot}{\cdot}yr^{-1}$ which is comparable with the accretion rate required by many chemical evolution models that is at least ${\sim}0.45M_{\odot}{\cdot}yr^{-1}$. However, it is not clear to what extent the exchange of gas between the disk and the cloud can occur when an HVC collides with the galactic disk. Therefore, we examined a series of HVC-Disk collision simulations using the FLASH 2.5 hydrodynamics simulation code. The outcomes of our simulations show that an HVC will more likely take away substances from the galactic disk rather than adding new material to the disk. We define this as an HVC having a "negative fuel rate". Further results in our study also indicate that the process and amount of fuel rate change can have various forms depending on the density, radius and velocity of an approaching HVC. The simulations in our study covers HVCs with a neutral hydrogen volume density from $1.0{\times}10^{-2}cm^{-3}$ to $41.0cm^{-3}$, radius of 200 pc to 1000 pc and velocity in the range between $40km{\cdot}s^{-1}$ and $100km{\cdot}s^{-1}$.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.429-438
• /
• 2016

In this paper, we investigate an interference mitigation scheme by antenna selection in device-to-device (D2D) communication underlaying downlink cellular networks. We first present the closed-form expression of the system achievable rate and its asymptotic behaviors at high signal-to-noise ratio (SNR) and the large antenna number scenarios. It is shown that the high SNR approximation increases with more antennas and higher ratio between the transmit SNR at the base station (BS) and the D2D transmitter. In addition, a tight approximation is derived for the rate and we reveal two thresholds for both the distance of the D2D link and the transmit SNR at the BS above which the underlaid D2D communication will degrade the system rate. We then particularize on the small cell setting where all users are closely located. In the small cell scenario, we show that the relationship between the distance of the D2D transmitting link and that of the D2D interfering link to the cellular user determines whether the D2D communication can enhance the system achievable rate. Numerical results are provided to verify these results.

• The Korean Journal of Ceramics
• /
• v.5 no.2
• /
• pp.155-161
• /
• 1999

The tribological behaviour of monolithic SiC as well as SiC-TiC and SiC-TiC-$TiB_2$ particulate composite materials has been investigated in unlubricated oscillating sliding tests against $Al_2O_3$ at temperature in the range from room temperature up to $600^{\circ}C$. At temperatures below $600^{\circ}C$ the wear rate of the systems with the composite materials was up to 20 times lower than the wear of the $Al_2O_3$/SiC system and was dominated by the oxidation of the titanium phases. At $600^{\circ}C$ the oxidation rate of the TiC and -TEX>$TiB_2$ grains becomes predominant resulting in an enhanced wear rate of the composite rate of the TiC and TiB2 grains becomes predominant resulting in an enhanced wear rate of the composite materials. The coefficient of friction shows similar values for all materials of investigation, increasing from 0.25…0.3 at room temperature to 0.7…0.8 $600^{\circ}C$. The wear of the $Al_2O_3$/SiC system is mainly abrasive at temperatures above room temperature and is characterised by an enhanced wear of the alumina ball at $600^{\circ}C$.

• Korean Membrane Journal
• /
• v.3 no.1
• /
• pp.32-38
• /
• 2001

Using the hollow fiber membrane module in a lab-scale membrane bioreactor, the anoxic- oxic (AO) process for nitrogen removal was operated for about one year. For the influent wastewater containing 1,200-1,400 mg $1^{-1}$ of CODcr and 200-310 mg $1^{-1}$ of nitrogen, this process achieved a high quality effluent of less than 30 mgCOD $liter^{-1}$ and 50 mgN $liter^{-1}$. The removal rate of organics was above 98% at a loading rate larger than 2.5 kgCOD $m^{-3}$$d^{-1}$. When the internal recycle from the oxic to the anoxic reactor changed room 2n to 600% rout the influent flow rate, the nitrogen removal rate increased from about 70 to 90% at a loading rate of 0.4 kgT-N m-s d-1. The initial increase of transmembrane pressure (TMP) was observed after a 4-month operation while maintaining the flux and MLSS concentration at 7-9 1 $m^2$ $h^{-1}$ and 6,000-14,000 mg $1^{-1}$, respectively. The TMP could be maintained below 15 cmHg for an 8-month operation. The chemical cleaning with an acid followed by an immersion in an alkali solution gave better cleaning result with the membrane operated for 10 month rather than that only by an alkali immersion.

• Korean Journal of Veterinary Research
• /
• v.9 no.2
• /
• pp.49-53
• /
• 1969

The distribution of radiophosphorus ($^{32}P$) was observed in three groups of female Albino tat consisted of early pregnancy group (10 days of pregnancy), late pregnancy group (18 days of pregnancy) and nonpregnanted control group. The results obtained were as follows: 1. The various sites arranged in the descending of absorption rate of $^{32}P$ were femur, mandible, liver, spleen, ovary, fetus (only from early pregnancy group) and kidney in both groups of non-pregnanted and early pregnancy and femur, mandible, fetus, liver, ovary, spleen and kidney in the late pregnancy group. 2. The significant difference (P<0.05) in the absorption rate was found between femur and mandible in the early pregnancy group. 3. The absorption rate of fetus from late pregnancy group was significantly (P<0.01) higher than that of fetus from the early pregnancy group. 4. The high absorption rate was observed with femur and mandible in both groups of non-pregnanted and early pregnancy. 5. The significantly (P<0.01) high absorption rate was observed with ovary and fetus from the late pregnancy group.