• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.9
• /
• pp.541-545
• /
• 2000

We propose a pulsed $CO_2$laser below 30W by the AC(60Hz) switching control of leakage transformer primary which has some advantages of cost and size compared to a typical pulsed power supply. Pulse repetition rate is adjusted from 5 Hz to 60 to Hz control laser output. In this laser a low voltage open loop control for high voltage pulse discharge circuit is employed to aviod the Hv sampling or switching and high voltage leakage transformer is used to convert low voltage pulse rectified from AC to high voltage one. A ZCS(Zero Crossing Switch) circuit and a PIC(programble one-chip microprocessor are used to control gate signal of SCR precisely. The pulse repetition rate is limited by 60Hz due to the frequency of AC line and a high leadkage inductance. The maximum laser output was about 23 W at pulse repetition rate of 60Hz total gas mixture of $CO_2$ : $N_2$ : He=1: 9: 15 and total pressure of 18 Torr

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.29-35
• /
• 2007

This study was conducted to investigate the germination rate, fat acidity and lipoxygenase activity of brown rice after storage of 6 and 12 weeks at high temperature ($35^{\circ}C$) with fifteen Korean and two Japanese rice varieties. Germination rate in rough rice and palatability value in cooked rice by rice taster were lower with longer storage period, while protein content, fat acidity, and lipoxygenase activity in brown rice were higher with longer storage period. Fat acidify was negatively correlated with germination rate. However fat acidity was positively correlated with lipoxygenase activity. Seventeen varieties were classified into two groups on the basis of germination rate, fat acidity and lipoxygenase activity after 12 weeks' storage at high temperature; Group I including eleven varieties of Odaebyeo, Sangmibyeo, Unkwangbyeo, Ilpumbyeo, Nampyeongbyeo, Ilmibyeo, Donganbyeo, Jungsanbyeo, Koshihikari, Hitomebore and Chucheongbyeo showed high germination rate, low fat acidity and low lipoxygenase activity, while Group II including six varieties of Sindongjinbyeo, Hoanbyeo, Gyehwabyeo, Daeyabyeo, Hopyeongbyeo, and Dongin 1 showed lower germination rate, high fat acidity and high lipoxygenase activity.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.320-326
• /
• 2014

The effects of high shear rate processing on the thermal properties of PC/ABS blends were studied. It was executed by the high shear processing machine (NHSS2-28) at the varied conditions of screw speeds and loaded duration. After the samples were processed with NHSS2-28, the $T_gs$ were shifted from 143 to $133^{\circ}C$, and the behavior of degradation determined by TGA showed two distinct steps before high shear rate processing, while it showed a straight line after the processing. In order to provide the reasons of the properties, it was showen by SEM and UTM that the droplet sizes morphologically decreased after the processing, and the elongations decreased slightly until 1000 rpm of screw speed and then sharply decreased, according to the conditions of high shear rate processing. Therefore, it can be confirmed that $T_g,s$ of PC/ABS blends were considerably shifted under an appropriate high shear rate condition, and rapidly dropped, so that blends degraded above the condition, due to stress-induced degradation.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.108-118
• /
• 2001

This study was performed to investigate the bioconcentration of IBP, methidathion and piperophos. The BCFs(bioconcentration factor), depuration rate constants for three pesticides in zebrafish(Brachydanio rerio) were measured by OECD guideline 305. The concentration of test pesicides were one-hundredth and one-thousandth concentration of 96-hrs L $C_{50}$ in accordance with OECD guideline 305. The results obtained are summarized as follows: The average BCF values of IBP were 5.31(n=4) and 7.30(n=4) at one-hundredth and one-thousandth concentration of 96-hrs L $C_{50}$ . The average BCF values of methidathion were 8.72(n=4) and 11.25(n=4), the average BCF values of piperophos were 34.30(n=4) and 42.60(n=4). Depuration rate constants of IBP were 0.09( $h^{-1}$ ) and 0.08( $h^{-1}$ ), half-life of IBP were 7.70 and 8.66 at each tested concentration. The concentrations of IBP in zebrafish at low and high concentrations rapidly decreased after 12(0.243$\mu\textrm{g}$/g) and 12 hours(0.040$\mu\textrm{g}$/g). Depuration rate constants of methidathion were 0.40( $h^{-1}$ ), half-life of methidathion were 1.73 at one-hunderdth and of 96-hrs L $C_{50}$ , repectively. The concentrations of methidathion in zebrafish at high concentrations rapidly decreased after 6 hours(0.18 $\mu\textrm{g}$/g). Depuration rate constant of low concentration was no measured because methidathion in zebrafish was depurated in 6 hours. Depuration rate constants of piperophos sere 0.15( $h^{-1}$ ) and 0.44( $h^{-1}$ ), half-life of piperophos were 4.62 and 1.58 at each tested concentration. The concentrations of piperophos in zebrafish at los and high concentrations rapidly decreased after 12(0.26$\mu\textrm{g}$/g) and 6 hours(0.015 $\mu\textrm{g}$/g). It was suggested that high BCF of piperophos was due to high Kow(octanol-water partition coefficient). The possibility of bioconcenration was not likely to be high because of its $K_{DEP}$(depuration rate constant) in the evniroment. It was suggested that low BCF of methidathion showed lowest Kow as well as the most rapid $K_{DEP}$. Therefore, the possibility of bioconcentration was not occured in the enviroment. It was suggested that the BCF dtermined for IBP was lower than that of other pesticides due to high Sw(water solubility), show $K_{DEP}$. Therefore, IBP revealed little bioconcentration effect on in aquatic ecosystem.ystem.

• Corrosion Science and Technology
• /
• v.4 no.2
• /
• pp.39-44
• /
• 2005

The purpose of this work is to understand the effect of Mo addition on SSC susceptibility of high strength low alloy steels in terms of microstructure and corrosion property. Materials used in this study are high strength low alloy (HSLA) steels with carbon content of 0.04wt% and Mo content varying from 0.1 to 0.3wt%. The corrosion property of steels was evaluated by immersion test in NACE-TM01-77 solution A and by analyzing the growth behavior of surface corrosion products. SSC resistance of steels was evaluated using constant load test. Electrochemical test was performed to investigate initial corrosion rate. Addition of Mo increased corrosion rate of steels by enhancing the porosity of surface corrosion products. However, corrosion rate was not directly related to SSC susceptibility of steels.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.76-79
• /
• 2009

The current understanding for phase/grain boundary sliding and low-temperature/high-strain rate superplasticity of two-phase titanium alloys is summarized. The quantitative analysis on boundary sliding revealed increased sliding resistance on the order of $\alpha/\beta\;\ll\;\alpha/\alpha\;\approx\;\beta/\beta$ boundary, hence, led to the conclusion that approximately 50% alpha(or beta) volume fraction and/or grain refinement is beneficial for obtaining large superplastic elongation at low temperature and/or high strain rate. To predict the temperature for 50% alpha volume in various alpha/beta Ti, artificial neural network was applied. Finally, much enhanced superplasticity was achieved through grain refinement utilizing dynamic globularization.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.457-460
• /
• 2000

The effect of code selection for a multicode DS/CDMA system is evaluated for a high deta rate transmission, The performance is evaluated in terms of bit error and outage probabilities. The multipath fading channel is modeled as a Nakagami-m distribution which has been known to be appropriate to model the multipath fading in urban as well as indoor channels. From simulation results, it is shown that the concatenated sequence of Walsh code and Gold sequence is most promising among many code selections. The considerations in this paper can be applied to the next-generation mobile communication systems such as IMT-2000 which requires high bit rate transmissions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.505-507
• /
• 2003

IEEE 802.15.3 High­Rate WPAN(Wireless Personal Area Network)는 10m 내외의 무선환경에서 실시간 비디오, 고품질 오디오 및 대용량 파일 전송을 가능케 하는 기술이다. 하나의 네트워크를 piconet단위로 구성하고 하나의 piconet에는 PNC(piconet coordinator)가 TDMA(Time Division Multiple Access) 방식으로 DEV(device)들에게 채널타임을 할당한다. 본 논문에서는 IEEE 802.15.3 High­Rate WPAN 환경에서 하나의 piconet이 형성된 경우 동시에 여러 개의 채널을 최대한 활용하기 위한 다중 채널 MAC을 제안하고 이를 위한 타임 할당 방식을 연구한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.24-31
• /
• 1999

Bulging is a forming method to shape of die cavity by using hydraulic pressure in tube or vessel. Bulging machine and die were developed in order to produce vessel for keeping warm. Bulging machine is a double type with two horizontal cylinders for bulging of two pieces at the same time. The developed die system has one bulging die and two drawing dies for necking at the both ends of tube. The diameter of tube expands by hydraulic pressure in tube. at the same time, thrust at the both ends of tube. pushes tube in the direction of expansion to obtain high expanding rate with no crack. In this study, the bulging properties were investigated to solve tube crack and necking in manufacturing vessel by the combination method of bulging and drawing. As a result, high expanding rate of tube radius without crack, precision necking and high productivity were obtained.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.76-84
• /
• 1990

To study diesel fuel spray behavior, an experimental study was undertaken to investigate injection characteristics in vary ing back pressure and atomization mechanism in a non-evaporating diesel spray. Generally, injection characteristics is the curve of fuel flow plotted against time. The area under this curve is equal to the total quantity of fuel discharged for one injection. The method that measures rate of injection is long tube-type fuel rate indicator. Diesel spray injected into a quiescent gaseous environment under high pressure is observed by taking high speed camera by the focused shadow photographs. The results show that, at the start of injection, as the injected fuel rushes into the quiescent atmosphere the spray angle becomes large. Finally the spray stabilizes at a constant cone angle. Spray penetration length increases with the injection pressure.