• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.206-209
• /
• 2003

The purpose of AR and HR coating is acquire the very low reflection rate and the high reflection rate through the deposition of a thin film using the refraction ofmaterial. Basically if the high refractive material and the low refractive material are chosen and the condition for the experiment is determined, then we solve theproject with the optical design and multi thin film coating. First of all, we choose $SiO_2$for the low refractive material and $TiO_2$ for the high refractive material and apply Sputtering System easy to control the refraction rate and excellent in reconstruction to the equipment of thin film multiplication. For the control of the refraction rate and growth rate we modify RF Power and the ratio of Gas(Ar:O2), And we use Ellipsometer for estimation and analysis of the refraction rate and growth rate and AFM&SEM for the analysis of surface and component.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.233-238
• /
• 1998

In this paper, the implementation of dual rate ADPCM using G.726 16Kbps and 40Kbps speech codec algorithm is handled. For small signals, the low rate 16Kbps coding algorithm shows almost the same SNR as the high rate 40Kbps coding algorithm , while the high rate 40Kbps coding algorithm shows the higher SNR than the low rate 16Kbps coding algorithm fur large signal. To obtain the good trade-off between the data rate and synthesized speech quality, we applied low rate 16Kbps for the small signal and high rate 40Kbps for the large signal. Various threshold values determining the rate are applied for good trade-off between data rate and speech quality. The simulation result shows the good speech quality at a low rate comparing with 16Kbps & 40Kbps.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.165.2-165.2
• /
• 2010

The objective of this study is to analyze the energy saving rate by retrofitting multi air conditioner from conventional type to high efficient type using Energyplus 4.0 which was developed for simulating a building energy by D.O.E. Generally, Multi air conditioner system was installed for both the cooling and the heating in a building. However, it was difficult to estimate the energy saving rate in the case of retrofitting multi air conditioner from conventional type to high efficient type. In the present study, annual energy consumptions of them were evaluated for same building and climate condition.

• Radiation Oncology Journal
• /
• v.13 no.1
• /
• pp.101-104
• /
• 1995

High Dose Rate Remote Afterloading system was installed at Wonkwang University Hospital in January 1994. In this report, the calibration of a Gammamed 12-i High Dose Rate Remote Afterloading system and the radiation survey around the facility after design and construct a shieding room are discussed. The radiation survey of the facility indicates that the use of ordinary concrete shielding of existing room will provide adequate shielding. Also, the methodologies for performing source calibration are presented.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.220-225
• /
• 2004

Four different Fluorine-based gases ($SF_6/,NF_3, PF_5,\; and \; BF_3$) were examined for high rate Inductively Coupled Plasma etching of Si. Etch rates up to ~8$\mu\textrm{m}$/min were achieved with pure $SF_6$ discharges at high source power (1500 W) and pressure (35 mTorr). A direct comparison of the four feedstock gases under the same plasma conditions showed the Si etch rate to increase in the order $BF_3$ < $NF_3$< $PF_5$ < $SF_6$. This is in good correlation with the average bond energies of the gases, except for $NF_3$, which is the least strongly bound. Optical emission spectroscopy showed that the ICP source efficiently dissociated $NF_3$, but the etched Si surface morphologies were significantly worse with this gas than with the other 3 gases.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.196-204
• /
• 2003

Mechanical properties of the materials used for transportations and industrial machinery under high strain rate loading conditions such as seismic loading are required to provide appropriate safety assessment to these mechanical structures. The split Hopkinson Pressure Bar (SHPB) technique with a special experimental apparatus can be used to obtain the material behavior under high strain rate loading conditions. In this paper, dynamic deformation behaviors of the aluminum alloys such as A12024-T4, A16061-T6, and A17075-T6 under both high strain rate compressive and tensile loading conditions are determined using the SHPB technique.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.226-228
• /
• 2004

IEEE 802.15.3 High-Rate WPAN(Wireless Personal Area Network)는 l0m내외의 무선 환경에서 실시간 비디오, 고품질 오디오 및 대용량 파일 전송을 가능케 하는 기술이다 하나의 네트워크를 piconet 단위로 구성하고 하나의 Piconet에는 PNC(piconet coordinator)가 TOMA(Time Division Multiple Access) 방식으로 DEV(device)들에게 채널타임을 할당한다. 본 논문에서는 IEEE 802.15.3 High-Rate WPAN 환경에서 하나의 piconet 에 존재하는 각각 통신을 하려는 DEV 들이 서로의 신호에 간섭을 받지 않을 만큼 떨어져 있다면 한 개의 채널타임을 각각의 DEV 들에게 동시에 할당하여 여러 DEV들이 동시에 통신을 하는 공간 재활용방식을 통해 네트워크의 성능을 향상하는 방법을 제안하고 MAC의 공간재활용방식을 통한 네트워크의 성능향상 방법을 연구한다.

• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.268-273
• /
• 2016

Potassium is well-known to improve turfgrass tolerance to environmental stresses such as low temperature and drought stress. Low mowing height reduces leaf area of turfgrass that is main place for photosynthesis and carbohydrate production. Closely-mowed turf would suffer from summer decline by low level of carbohydrate resulted from low photosynthesis of reduced leaf area. The objective of the study is to investigate K rate and mowing height for Kentucky bluegrass. The K rate treatments were 5, 10, and $20g\;K_2O\;m^{-2}$ for the low, medium and high K rates, respectively. The bi-weekly mowing treatment was made for treatments. Mowing was implemented at 40 and 100 mm using a rotary mower. Regardless K rates, the high mowing height would be required when the air temperature is higher than $28.5^{\circ}C$ and high turfgrass quality of Kentucky bluegrass is needed. When the air temperature is optimal for cool-season grass, the high mowing height and the low K rate is needed for the root length of Kentucky bluegrass.

• ETRI Journal
• /
• v.45 no.6
• /
• pp.974-981
• /
• 2023

This paper presents a transition-limited pulse-amplitude modulation (TLPAM) signaling method to enable a high data rate and robust wireline communications. TLPAM signaling addresses the impact of high intersymbol interference (ISI) ratios in conventional M-ary PAM signaling methods by limiting the maximum voltage transition level between adjacent symbols. The implementation of a TLPAM signaling encoder is realized by setting back the most significant bits (MSBs) in the queue. The correlation between TLPAM's maximum transition level, effective data rate, and eye width/height is analyzed with various channel loss parameters, followed by characterization and measurement results with a realistic channel setup. The analysis and experimental results reveal the effectiveness of the proposed TLPAM signaling scheme for achieving a high data rate with minimal interference.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.2
• /
• pp.393-404
• /
• 2013

In order to improve the employment rate of graduates in maritime and fisheries high schools, we investigated the employment situations of the those graduates for the last 8 years. The results were as follows, The ratio of graduates in maritime and fisheries high schools to total graduates of on-board departments are 69.1% and 30.9% respectively. The on-board employment rate of maritime high schools and fisheries high schools graduates are 63.2% and 26.7% respectively. Nearly all of the maritime high schools students were employed to merchant ship and fisheries high schools students were employed to merchant ship 77.2% and only 22.8% of them got a job on fisheries ship. The ratio of getting a job in maritime high schools to ocean-going ship was 76.7%, that was the highest ratio and the ratio of fisheries high schools got a job to ocean-going ship was 55.1%. The on-board career of maritime high schools graduates was 1~5 years, which took 86.4% of all careers and that of fisheries high schools was less than 1 year, which took 60.0% of all careers. We should make the various efforts to improve the employment rate of getting job to fisheries ship in the fisheries high school graduates.