• 열처리공학회지
• /
• 제25권1호
• /
• pp.22-26
• /
• 2012

An influence of the addition of copper (0.5, 1.0 and 1.5 mass% Cu) on the microstructure and mechanical properties of high purity iron (99.998 mass%) was characterized. The microstructure and microhardness of high-purity iron based samples, which were rolled at room temperature and subsequently annealed, were investigated in this work. The microstructure of the samples has been observed by electron back scattering diffraction (EBSD) and the mechanical properties have been studied by using micro-Vickers hardness test. The results of microstructural observation showed that deformation band was formed in high purity iron by rolling at room temperature, and it was recovered by annealing up to about 900 K. The microhardness results showed that the softening of high-purity iron occurred by annealing up to about 900 K, while the hardness of iron added with about 0.5-1.5 mass% copper was kept over 100 Hv and at the early time of annealing reached a maximum. The hardness of iron added with a small amount of copper may be attributed to precipitation hardening as well as solution hardening. The orientation of crystal in recrystallized grain was almost same as that of deformed grain.

• 한국주조공학회지
• /
• 제31권4호
• /
• pp.175-179
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.149-153
• /
• 2005

The electron beam machining provides very high resolution up to nanometer scale, hence the E-beam writing technology is rapidly growing in MEMS and nano-engineering areas. In the optical column of the e-beam writer, there are several lenses condensing and focusing electron beams from electron gun with fringing magnetic fields. The polepieces of these lenses are usually made with high purity iron which is hard to fabricate and very expensive. In this paper, the possibility of using polepiece of object lens composed with pure iron and low carbon steel was examined to reduce cost. The magnetic field at object lens was calculated with finite element method, and practical focusing qualities of SEM pictures were observed comparing for the object lens polepieces with pure iron and two type of composed with low carbon steel.

• 한국주조공학회지
• /
• 제11권3호
• /
• pp.236-244
• /
• 1991

This paper describes a study of the nucleation and growth of graphite crystal of levitation melted high purity Fe-C-Si alloys with emphasis on hypereutectic composition. Spherulitic graphite was observed to form at high purity alloy and converted to compacted by changing the starting iron from ultra-pure zone refined iron to 99.95 pct electrolitic iron. Residual C-C clusters might be acting as an effective nucleation site for graphite, and sulphur was the element to prevent graphite from nucleating. The graphite morphology changed from compacted to spherulitic as the sulphur content decreased.

• 한국주조공학회지
• /
• 제28권2호
• /
• pp.52-56
• /
• 2008

• 한국수소및신에너지학회논문집
• /
• 제22권3호
• /
• pp.340-348
• /
• 2011

Effects of various inorganic-metal oxide (Zr, Zn, Si, Al and Ca as promoters and stabilizers) additive on the reduction rate of iron oxide and the composition of forming hydrogen using the steam-iron cycle operation was investigated. The reduction rate of redox agent with additive was determined from weight change by TGA. The changes of weight loss and reduction rate according to redox agent with various additive affected the hydrogen purity and cycle stability of the process. The cyclic micro reactor showed that hydrogen purity exceeding 95% could be obtained by the water splitting with Si/Fe, Zn/Fe, Zr/Fe redox agents. The redox agents with these elements had an affect on redox cycle stability as a good stabilizer for forming hydrogen by the steam-iron process.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.355-363
• /
• 2010

High purity hydrogen, 97-99 vol.%, with CO at just ppm levels was obtained in a fixed bed of iron oxide employing the steam-iron cycle operation with reduction at 823K and oxidation in a steam-$N_2$ mixture at 773K TGA experiments indicated that temperature of the reduction step as well as its duration are important for preventing carbon build-up in iron and the intrusion of $CO_2$ into the hydrogen product. At a reduction temperature of 823K, oxide reduction by $H_2$ was considerably faster than reduction by CO. If the length of the reduction step exceeds optimal value, low levels of methane gas appeared in the off-gas. Furthermore, with longer durations of the reduction step and CO levels in the reducing gas greater than 10 vol.%, carbidization of the iron and/or carbon deposition in the bed exhibited the increasing pressure drop over the bed, eventually rendering the reactor inoperable. Reduction using a reducing gas containing 10 vol.% CO and a optimal reduction duration gave constant $H_2$ flow rates and off-gas composition over 10 redox reaction cycles.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.39-45
• /
• 2015

We produced magnetite nanoparticles (MNPs) and a Mg-rich solution as a nano-adsorbent and a coagulant for water treatment, respectively, using a low-grade iron ore. The ore was leached with aqueous hydrochloric acid and its impurities were removed by solvent extraction of the leachate using tri-n-butyl phosphate as an extractant. The content of Si and Mg, which inhibit the formation of MNPs, was reduced from 10.3 wt% and 15.5 wt% to 28.1 mg/L and < 1.4 mg/L, respectively. Consequently, the Fe content increased from 68.6 wt% to 99.8 wt%. The high-purity $Fe^{3+}$ solution recovered was used to prepare 5-15-nm MNPs by coprecipitation. The wastewater produced contained a large amount of $Mg^{2+}$ and can be used to precipitate struvite in sewage treatment. This process helps reduce the cost of both sewage and iron-orewastewater treatments, as well as in the economic production of the nano-adsorbent.

• 한국결정성장학회지
• /
• 제27권6호
• /
• pp.303-308
• /
• 2017

여러 가지 금속을 에칭하기 위하여 사용된 $FeCl_3$ 폐용액은 유가금속인 니켈을 함유하고 있다. 본 연구에서는 염화철을 재생하고 남은 니켈 함유 에칭폐액으로부터 니켈을 고순도의 탄산니켈 결정분말로 회수하고자 하였다. 5 % NaOH 수용액을 이용하여 pH 4의 조건에서 1차적으로 철 성분의 불순물을 약 97 % 제거하고 추가적으로 남은 불순물을 제거하기 위하여 용매추출제 D2EHPA(Di-(2-ethylhexyl) phosphoric acid)를 사용하여 불순물로서 존재하는 금속이온들을 약 99% 제거하였다. 그 후 불순물이 제거된 염화니켈 용액에 탄산나트륨과의 반응을 통하여 99.9 % 이상의 순도를 가진 탄산니켈분말을 얻을 수 있었다.

• 대한화학회지
• /
• 제11권4호
• /
• pp.132-137
• /
• 1967

8-Hydroxy-Quinoline(Qxine)에 依한 高純度 Antimony中 不純物(鐵 및 銅)의 吸光光度 定量法을 檢討하였다. 試料의 黃酸溶液에 안티몬을 Masking하기 위하여 必要한 酒石酸의 影響을 調査한 結果, 0.5M-酒石酸溶液 10ml로서 600mg 까지의 안티몬을 Masking할 수 있었다. pH 範圍는 鐵은 5.0-5.7, 銅은 3.5-4.0이었다. 鐵은 580$m{\mu}$ 에서 吸光度를 測定하면 되나, 銅은 15%苛性소오다溶液으로 逆抽出하고, 남은 鐵을 580$m{\mu}$, 410$m{\mu}$ 에서 測定하여 補正할 必要가 있다. 500mg 안티몬에 對하여 鐵은 150${\mu}g$(0.005~0.03%)까지, 銅은 100${\mu}g$(0.005~0.016%)까지 定量이 可能했다.