• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

• 한국식품영양과학회지
• /
• 제36권5호
• /
• pp.589-594
• /
• 2007

된장모델로서 0.2 mM $FeCl_2$를 함유한 0.1 M glucose-0.1 M glutamic acid 모델액에 50 mM citric acid와 이의 synergist로 5종의 금속결합능이 있는 식품첨가물을 첨가하여 시료를 조제한 후 $30^{\circ}C$와 $40^{\circ}C$에서 4주간 저장하면서 식품첨가물들이 된장모델의 갈변억제에 미치는 영향을 알아보았다. $30^{\circ}C$에서 저장시 시료의 갈변억제율은 일정하게 유지 되다가 3주후 급감하였고, $40^{\circ}C$에서 저장한 경우는 저장기간이 증가됨에 따라 감소하였다. $30^{\circ}C$와 $40^{\circ}C$에서 4주 저장후 가장 높은 갈변억제율을 나타낸 첨가구는 tannic acid 0.015%와 pyrophosphate 0.15%이었으며, $30^{\circ}C$에서 저장시 이들 첨가구의 갈변억제율은 synergist 무첨가구보다 32%가 높았다. 또한 $30^{\circ}C$에서 4주 저장 후 gallic acid, tannic acid, pyrophosphate는 형광물질과 3-deoxyglucosone과 같은 Maillard 반응중간생성물의 생성을 크게 억제하였는데, 이는 이들 synergist들의 높은 철 이온 결합능에 의한 것으로 생각되었다. 중간생성물의 생성 억제효과는 0.15% 첨가 시가 0.015% 첨가시보다 높았다. 한편 gallic acid는 갈변도를 증가시키고, tannic acid는 철 이온과 유색의 착체를 형성하므로, 갈변억제제로 citric acid를 된장에 사용할 경우 이의 synergist로는 pyrophosphate가 가장 적당한 것으로 생각되었다.

• 한국수산과학회지
• /
• 제19권1호
• /
• pp.20-26
• /
• 1986

Very little information is available in the literature on storage of fish sauce. Therefore, microbiological and chemical chracteristics during storage and quality of fish sauce were investigated and discussed to present data about the optimum storage condition. The chopped sardine meat was mixed with equal amount of water and $9\%$(w/w) of $75\%$ vital wheat gluten and then hydrolyzed by addition of commercial proteolytic enzymes such as bromelain, papaya protease, ficin and a enzyme mixture (Pacific Chem. Co.) for 4 hours at $52.5^{\circ}C$. The reaction mixture was heated for 30 min at $100^{\circ}C$ for enzyme inactivation, pasteurization and color development and then centrifuged for 20 min at 4,000 rpm. Table salt and benzoic acid were added for bacteriostatic effect and stored for 80 days at $15{\pm}1^{\circ}C$ and $30{\pm}1^{\circ}C$. The results were summarized as follows: 1. The amount of amino-nitrogen and pH of fish sauce were almost unchanged during storage. 2. Mininum concentration of salt for bacteriostatic activity was $9\%$(w/w) regardless of addition of benzoic acid. 3. the yields of amino-nitrogen were $63.1\%$ for the hydrolysate prepared without enzyme, $79.7\%$ for that with bromelain, $69.9\%$ with ficin, $74.3\%$ with papaya pretense, and $78.1\%$ with enzyme mixture, respectively. 4. The contents of amino-nitrogen were $4510.0mg\%$ on the dry basis for the product prepared by autolysis, $5483.2mg\%$ for that prepared with bromelain, $5305.7mg\%$ with ficin, $4994.1mg\%$ with papaya protease and $5582.3mg\%$ with the enzyme mixture, respectively. 5. The contents of crude protein were $51.35\%$ on the dry basis for the product prepared by autolysis and 55 to $59\%$ for prepared with commercial enzymes. 6. The hydrolysate prepared with the enzyme mixture revealed a little stronger meaty taste than any other products. 7. The level of crude protein in residues was still high ($69.5{\sim}77.2\%$ on the dry basis) and might be originated from the added vital wheat gluten.

• 자원환경지질
• /
• 제29권1호
• /
• pp.45-55
• /
• 1996

Although the Dongjin Au-Ag-Cu mine had been abandoned since about forty years ago, the results of this study on the dispersion patterns and contamination level of heavy metals in the hydrologic system flowing via the waste rump show that the environmental impacts from the mine wastes are still significant. The stream water in the vicinity of the waste rump is severely acidified (pH 3.8 to 4.4) and highly enriched in various dissolved heavy metals. The heavy metal contents of the stream water and stream sediments are systematically attenuated with increasing distance from the mine area. However, it is worth to note that continuous attenuation of heavy metal contents in both media were reenriched in downstream area more than 800 m apart from the mine because it can be acted as a secondary source of heavy metal pollution. The heavy metals, especially Cd, Cu and Zn of polluted downstream sediments mainly occur in Fe-Mn oxides and organic materials, which indicates that these elements are the main pollutants from the waste rump of the Dongjin mine. The heavy metal contents of crops, such as sesame, perilla, red Pepper and brown rice, collected from the polluted farm land in the downstream area are lower than those of land plants from stream sides, but significantly higher in Cd, Cr, Cu and Zn than those from the unpolluted farm land. Especially, almost all of the crops in polluted farm land have been severly contaminated by Cd (>0.4 ppm). On the other hand, the heavy metal contents of the crops collected from refreshed farm land by means of a soil addition method shows significantly lowered level comparing with those of polluted area, which indicates that a soil addition method was effective for the refreshment of polluted farm land by toxic metallic pollutants. Wormwoods from this area showed very high contents in a11 the heavy metals even in unpolluted area (Cd > 1 ppm, Cr > 1 ppm, Cu > 11 ppm, Pb> 4 ppm, Zn > 55 ppm), indicating that a special caution must be payed when one takes ingest them.

• 유기물자원화
• /
• 제4권2호
• /
• pp.55-62
• /
• 1996

본 연구에서는 중금속에 대한 지렁이 분변토의 흡착특성을 활성탄과 비교함으로서 중금속 함유폐수처리를 위한 경제적인 흡착제로서 활용가능성을 평가하기 위한 연구를 수행하였다. 지렁이를 이용한 퇴비화에 사용된 슬러지는 피혁슬러지와 우분슬러지를 7:3으로 혼합하여 부숙시킨 것을 사용하였다. 분변토의 물리화학적 특성을 평가하기 위한 용출실험으로부터 분변토는 약간의 pH의 완충능력과 55.1me/100g의 양이온교환능력을 가지는 것으로 평가되었다. 분변토의 중금속에 대한 흡착평형시간은 90분 이내로서 활성탄과 큰 차이가 없었으며, Pb, Cu, Cd, Cr, Zn의 제거효율은 활성탄이 각각 98%, 93%, 94%, 89%, 82%, 분변토는 95%, 90%, 88%, 80%, 66%로 평가되었다. 흡착제 양의 변화에 따른 흡착특성을 Freundlich 등온 흡착식으로 해석한 결과 1/n값은 분변토의 경우 0.28~0.74로서 활성탄의 0.29~0.56에 근접하는 결과를 얻을 수 있었으며, 이 결과로부터 분변토를 경제적인 중금속흡착제로 사용 가능한 것으로 평가되었다. 또한, 분변토의 중금속 성분별 흡착선호성향을 활성탄과 비교 분석한 결과 분변토는 Pb>Cu>Cd>Cr>Zn의 순이었으며, 활성탄은 Pb>Cd>Cu>Cr>Zn의 순이었다.

• 지질공학
• /
• 제24권4호
• /
• pp.525-534
• /
• 2014

폐광 부지에서 발생하는 대표적인 환경 문제는 산성으로 오염된 지표수와 지하수, 적재된 폐광석 및 광미, 채굴 활동으로 야기된 지반침하 현상을 들 수 있다. 이 논문은 광해 유형에 따라 재해 및 오염영역을 효율적으로 탐지했던 지구물리탐사방법들을 고찰하는데 있다. 시험 자료로서 토양오염, 산성광산배수, 지반침하, 인공차수막 파손 및 광미/폐광석 적치장을 각각 대표하는 네 개의 폐광 부지를 선택하였다. 자료 검증을 위해 물리탐사자료는 자료의 유형에 따라 시추자료(코어 샘플, 물리검층, 토모그래피 등)와 물 자료(수소이온농도, 전기전도도, 중금속원소 등)와 비교하였다. 토양오염 탐지에 있어서 낮은 전기비저항 이상대는 특히 구리, 납, 아연의 중금속 농도가 높은 지역과 부합된다. 산성광산배수의 유동 경로는 자연전위 곡선에서 음의 전위 이상대, 전기비저항자료에서의 저비저항 이상대, 지하레이더 자료에서의 얕은 투과깊이 영역으로 탐지되었다. 채굴적은 전기비저항 단면에서의 저비저항 이상대, 탄성파토모그래피에서 낮은 속도 영역, 물리검층곡선의 복합해석으로 특징되며, 정확한 위치는 코어자료와 시추공영상자료에서 잘 확인되었다. 침출수 유동을 차단하기 위해 설치된 인공차수막의 파손 구간은 전기비저항 자료에서의 국부적인 이상대로 정확히 탐지되며 매립된 폐석더미는 고비저항 이상대와 저속도 이상대로 특징된다.

• Applied Microscopy
• /
• 제24권2호
• /
• pp.48-62
• /
• 1994

The acute irradiation effect on rat Purkinje cell was carried out. Anesthetized rats, weighing 200-250g each, were exposed their heads to the linear accelerator (ML-4MV) with the doses of 3,000 rads or 6,000 rads respectively. Irradiated rats were sacrificed by perfusion fixation under anesthesia, six hours, two days and six days following the irradiations. Rats were perfused with the fixative of 1% glutaraldehyde-1% paraformaldehyde solution (pH 7.4). Small pieces of cerebellar cortices were taken out. Tissue blocks were washed out, and were refixed in the 2% osmium tetroxide solution. After dehydration, tissues were embedded in the araldite mixture. Ultrathin sections stained with uranyl acetate-lead citrate solution, were examined with an electron microscope. The results observed were as follow; 1. Many dark Purkinje cells exhibited most severe cellular alterations on 6 hours. But after the 2 or 6 days, the cells exhibited only some alterations of cytoplasmic organelles. 2. Many granular and agranular endoplasmic reticula exhibited the fusion of cisterns. These reticular alterations were most severe on 6 hours following irradiation. But the alterations were hardly found on 6 days. 3. In the Golgi region, alterations including the adhesion of lamelliform cisterns, enlarged saccules, and increased number of vesicles, etc, were seen on 6 hours. But the Golgi complexes were almost recovered on 6 days. 4. Lysosomes were abundant on 6 hours or 2 days, but some residual bodies were found on 6 days. 5. Mitochondrial changes were also most severe at on hours, and they were recovered thereafter. From the results, it was concluded that the cerebellar Purkinje cells reacted to the high doses of irradiation by hyperactive protein synthesis, autolytic activities and energy metabolism. The reaction was most active in the early stage. It implies that motor-control function of Purkinje cells are severely disturbed in the early stage of irradiation.

• 한국환경복원기술학회지
• /
• 제7권1호
• /
• pp.40-49
• /
• 2004

This work carried out to define the characteristic of Cymbidium kanran habitat at Mt. Halla in Jejudo, Korea from the ecological point of view including geological and topographical features, air and soil temperature, relative humidity, fluctuations of light intensity, habitat vegetation, distribution altitude, area limit, and etc. And another goal of this study consider the conservation counterplan of the cymbidium habitat. Natural distribution areas of the cymbidium were observed more abundantly on the well drained south and east-facing slopes. Soil acidity was ranged from pH 4.1 to 5.3, and electric conductivity was ranged from 176.4 to 299.9 us/cm (average 215.3 us/cm). Base-saturation percentage of the habitat soil was below 50%, bulk density 0.42g/$cm^2$, particle density 2.05g/$cm^2$, humus content 26%, total nitrogen 0.82%, available phosphate 4.2 mg/kg, exchangeable potassium 0.63 Cmol/kg, calcium 0.44 Cmol/kg and magnesium 0.67 Cmol/kg. Annual mean air temperature was $15.4^{\circ}C$, however, air temperature was ranged $11.7{\sim}18.2^{\circ}C$ in spring, $21.2{\sim}23.8^{\circ}C$ in summer, $12.8{\sim}22.0^{\circ}C$ in fall and $5.5{\sim}7.8^{\circ}C$ in winter season. Annual mean soil temperature at depth of 10cm was $13.2^{\circ}C$ And minimum value was recorded $4.7^{\circ}C$ on January, and maximum value $22.5^{\circ}C$ on August. Relative humidity was ranged 90.8~94.7% in summer, 80.8~91.5% in fall and 77.6~84.2% in winter season. Minimum value was 56.5% on December, and maximum value was 100% on July and August. Light intensities were ranged from 400 to 1,800 lux at the greater part of Cymbidium kanran sites in Jejudo. Summer regarded as an lower light intensities was recorded to be range of 500~600 lux; however, autumn and winter were shown higher light regimes ranged from 3,500 to 3,800 lux. Therefore, one must be suprised that the cymbidium grow at the light condition of 6 lux (minimum) or 10,000 lux (maximum). Tree species keeping higher frequency rate and density were Eurya japonica, Camellia japonica, Castanopsis cuspidata, Carpinus laxiflora and Pinus densiflora. Number of trees growing in a 5${\times}$5m quardrat was 35 as an average, and proportion of evergreen versus deciduous was 5:1. Distribution altitude of the orchid habitat was ranged from 120m (low) to 840m (high) from sea level on the south facing slope of Mt. Halla, and was ranged eastern borderline of Gujwaup, Bukjejugun to western boundaries of Jungmundong, Seogwipo city. For the stable conservation of Cymbidium kanran habitat, sunlight regimes must be increased more by means of cutting trees or twigs in the site.

• Journal of the Korean Wood Science and Technology
• /
• 제27권2호
• /
• pp.62-69
• /
• 1999

본 연구는 표고버섯 재배폐골목 및 지조를 이용한 유기질비료 제조를 위한 적정 조건을 찾고, 제조한 유기질비료를 사용하여 식물의 생육 및 토양온도에 미치는 영향을 검토하기 위하여 실시하였다. 시멘트블록조 발효상을 사용하여 제조한 톱밥과 발효첨가제를 적량 첨가하여 퇴적후, 1 개월마다 뒤집기하면서 발효부숙시켜 표고버섯 재배폐골목 및 신선지조로부터 양질의 유기질비료를 제조할 수 있었다. 적정 제조조건으로서는 목질계 재료 1톤에 대하여 요소비료 12kg, 석회 25kg, 계분 40kg 및 적당량의 발효첨가제가 필요하였으며, 함수율은 55% 였다. 유식물 파종실험에서 유기질비료의 혼합량이 많아질수록 무우의 생장이 우수한 것으로 나타났으며, 유기질비료의 혼합율이 증가함에 따라 토양의 온도가 다소 높아지는 경향을 나타냈다. 유기질비료는 아침 외기의 온도가 내려가면, 토양의 온도를 높게 유지시키며, 외기의 온도가 높은 시간대는 오히려 토양의 온도를 낮추는 온도완충효과를 주었는데, 이러한 효과는 유기질비료의 혼합비가 높아질수록 더욱 커지는 것으로 나타났다.

• 생명과학회지
• /
• 제26권12호
• /
• pp.1477-1486
• /
• 2016

Lactulose는 lactose의 이성질체로 galactose와 fructose의 ${\beta}$-1,4-glycosidic 결합으로 구성된 비소화성 기능성 이당으로 소장에서 분해되지 않고 대장에 도달하여 장내 유산균에 의해 이용되어 대장의 pH를 저하시켜 유해균의 증식을 억제 시키고 장내 균총을 유익한 방향으로 개선하는 효과를 가지고 있다. 또한 수용성 식이섬유로 작용하여 변비와 간성뇌질환등의 치료에 이용되고 있고 lactose에 비해 감미도 및 용해도가 우수하여 다양한 식품산업으로 유용하게 사용될 수 있는 높은 잠재적 활용가치를 보유하고 있는 기능성 당류이기도 하다. Lactulose를 생산하기 위하여 화학적 방법과 효소적 방법이 보고 되어있는데, lactose를 강알칼리 조건에서 이성화시키는 화학적 방법에 의한 lactulose의 생산은 고온, 고압의 반응 조건 및 중화 과정에서 사용되는 강산으로 인해 생성물의 과분해 및 부산물 생성에 의한 복잡한 정제과정이 요구되며 환경오염에 대한 심각한 문제를 내포하고 있다는 단점이 있다. 이러한 화학적 방법과는 달리 ${\beta}$-galactosidase 또는 cellobiose 2-epimerase와 같은 효소를 이용한 lactulose의 생산은 반응의 정밀성, 특이성, 반응공정의 안전성 및 친환경적 생산방법이라는 다양한 장점을 가지고 있다. 하지만, 효소적 생산 방법 중에서 ${\beta}$-galactosidase를 이용한 lactulose의 생산은 기질로서 유당뿐 아니라 과당을 함께 사용해야 하며 높은 기질농도에서만 반응이 이루어 지기 때문에 경제적으로 비효율적이라는 단점이 지적되고 있기도 하다. Lactulose의 효소적 생산방법에 있어서 이러한 단점을 극복하기 위하여 lactose 단일 기질로부터 높은 수율의 lactulose를 생산할 수 있는 cellobiose 2-epimerase를 이용한 lactulose생산 방법에 대한 연구가 활발하게 진행되고 있지만 향후 효소 반응 공정 및 효소특성개량에 대한 지속적인 연구를 통하여 lactulose 산업적 생산을 위한 다양한 연구가 필요한 실정이다.