• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.517-524
• /
• 2004

The objective of this study was to investigate the environmental effects on duration time of milk flow, peak milk flow, and average milk flow in teats, and to estimate their relationships with milk yields in morning and evening milking, and to provide fimdamental information for the further study on their relationships with clinical mastitis and somatic cell in milk. A total of 6,768 milking records were studied in 72 Holstein cows. The influences of season, parity, lactation month, and milking interval on characteristics of milk flow considering in linear model were significant(p<.05). Duration of milk flow was longest at milking in fall, past first parity and second month of lactation, and with milking interval over than 13.5hrs. Average milk flow rate and peak milk flow rate were highest at milking in summer, past first parity and 8${\sim}$10 months of lactation, and with milking interval over than 13.5hrs. Milk flow rate was positively correlated to milk yield, and negatively correlated to the duration of milk flow. However duration milk flow was positively correlated to the milk yield with high level of correlation coefficient(+.60). For the establishment of optimum selection criteria on these traits, other aspects such as the udder health, disease and respective economic weights of milk flow characteristics in this study must be considered to develop the indices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3260-3268
• /
• 2009

A test apparatus has been fabricated to simulate chemical effect on head loss through a strainer in a pressurized water reactor (PWR) containment water pool after a loss of coolant accident (LOCA). Tests were conducted under condition of same ratio of strainer surface area to water volume between the test appratus and the containment sump. A series of tests have been performed to investigate the effects of spray, existence of calcium-silicate with tri-sodium phosphate (TSP), and composition of materials. The results showed that head loss across the chemical bed with even a small amount of calcium-silicate insulation instantaneously increased as soon as TSP was added to the test solution. Also, the head loss across the test screen is strongly affected by spray duration and is increased rapidly at the early stage, because of high dissolution and precipitation of aluminum and zinc. After passivation of aluminum and zinc by corrosion, the head loss increase is much slowed down and is mainly induced by materials such as calcium, silicon, and magnesium leached from NUKONTM and concrete. Furthermore, it is newly found that the spay buffer agent, tri-sodium phosphate, to form protective coating on the aluminum surface and reduce aluminum leaching is not effective for a large amount of aluminum and a long spray.

• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.234-241
• /
• 2016

The approach presented in this article refers to the bioanalytical method validation for the detection and quantitative determination of arsenic species including arsenite (As(III)), arsenate (As(V)), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) in dog plasma by high-performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC-ICP/MS). The arsenic species were separated using an agilent As speciation column by a mobile phase of 2 mM sodium phosphate monobasic, 0.2 mM ethylenediaminetetraacetic acid disodium salt dehydrate, 10 mM sodium acetate, 3 mM sodium nitrate and 1 % ethyl alcohol at pH 11 (adjusted with 1M NaOH). The method validation experiment was obtained selectivity, linearity, accuracy, precision, matrix effect, recovery, system suitability, dilution integrity and various stabilities. All calibration curves showed good linearity (R²>0.999) within test ranges. The lower limit of quantitation (LLOQ) was 5 ng/mL for As(III), As(V) and DMA, and 20 ng/mL for MMA. The system suitability and dilution values were within 6.5 % and 7.7 %. Subsequently, the developed and validated HPLC-ICP/MS method was also successfully applied to determine the arsenic speciation in dog plasma samples, and the recoveries for the spiked samples were in the range of 91.5–102.2 %. Therefore, this method could be applied to the evaluation of arsenic exposure, health effect assessment and other bio-monitoring studies in biological samples.

• Korean Journal of Environmental Biology
• /
• v.20 no.1
• /
• pp.91-99
• /
• 2002

With physico-chemical environmental factors such as temperature, DO, pH, conductivity and nutrients, size fractionated of phytoplankton standing crops and chlorophyll a concentrations $(>8\mu{m},\;3-8\mu{m},\;<3\mu{m})$ and their relationships were investigated at each station of Kyungan Stream and Togyo Reservoir from April to November in 1997. The two sampling sites showed different nutrient status: Kyungan Stream was eutrophic, while Togyo Reservoir was mesotrophic. Large sizes of phytoplankton and chl. a were higher in Kyungan Stream, opposite to those of Togyo Reservoir; Standing crops of phytoplankton $(>8\mu{m)$ and chl. a $(3-8\mu{m)}$ were high in Kyung-an Stream, while phytoplankton $(3-8\mu{m)}$and chi. a $(<3\mu{m)$ were abundant in Togyo Reservoir. These results imply that phytoplankton community in the highly eutrophicated water mainly comprised the large filamentous and/or colonial algae, such as Microcystis spp. and Aphanizomenon flos-aquae, which easily enriched by nutrients loading.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.3
• /
• pp.168-173
• /
• 1989

In this report two experiments were carried out. Vertical distribution of exchangeable potassium(K) of soil in the orchardgrass meadow was investigated‘ a and K leaching from soil was monitored under lysimeter condition throughout one year. The results obtained a are as follows; The difference in the exchangeable soil K content b between the soil layers was very small in K-zero plot of the orchard grass meadow, but it was significant in K¬h high plot (Experiment 1). T The volume of leached water from the Iysime ter was a about 471 liters/m2 during a year and the amount of leached water was influenced by the precipitation. D During the investigation the quantity of leached K was 2 22.3 g/$m^2$. About 40 % of the total K in a year leached out during the first two months, May and June, after the start of the experiment. On the other hand, leached K amounted to 13.2 g/$m^2$ (60 % of the total K leached) during the period of ten months from July, 1985 to A April, 1986, when forages were harvested from the soil o of the lysimeter (Experiment 2). From the above results, it was known that K leach¬i ing from grassland soil can be also occurred in consider¬a able amount when the growth stage of forage is not d developed or soil does not become solid on such a p period as immediately after grassland improvement or e establishment. However, unless the K leaching from soil s seems to be little under the condition of permanent g grassland ecosystem with higher grade of soil hardness a and possibly with compact density of forage plants.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.40-48
• /
• 2010

This study was carried out to investigate the physicochemical and functional properties of Yacon (Polymnia Sonchifolia) powder. The proximate composition of Yacon powder as a dry matter basis was 3.53% moisture content, 1.13% crude protein, 0.40% crude fat, 0.79% crude ash, 1.63% dietary fiber and 92.52% carbohydrate. The major free sugars were identified as fructose and glucose. Analysing total amino acids, 18 kinds of components were isolated from Yacon powder. The essential amino acid contained in Yacon powder accounted for 28.40% of total amino acid, while the non-essential amino acid accounted for 73.61%. Analysing total fatty acids, only 2 kinds - palmitic acid and lauric acid - were detected. Oxalic acid was the major organic acid. The contents of vitamin A, vitamin C and vitamin E were 0.057 mg%, 0.670 mg% and 0.001 mg%, respectively. The mineral contents of Yacon powder were in the order of Zn

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.884-892
• /
• 2003

This study was conducted to optimize the water homogenization process of mandarin orange peel for colored rice. Four variables were used to determine the optimum conditions for homogenization speed, time, temperature, and water volume with a five level central composite design and response surface methodology. The process was optimized using the combination of EI and b values of rice coated with water extract of the mandarin orange peel. The effect of water volume was the most significant compared to the other variables on the quality of water homogenate. The regression polynomial model was a suitable (p>0.05) model by lack-of-fit analysis showing high significance. To optimize the process, based on surface response and contour plots, individual contour plots for the response variables were superimposed. The optimum conditions for manufacturing water extract from mandarin orange was with 8,500 rpm homogenization speed, 2.8 min time, $53^{\circ}C$ temperature, and 42 mL water volume with the maximum of restricted variables of EI above 400 and h value above 24.

• Fisheries and Aquatic Sciences
• /
• v.21 no.2
• /
• pp.6.1-6.10
• /
• 2018

The intention of this study was to identify the bacterial pathogens infecting Oreochromis niloticus (Nile tilapia) and Clarias gariepinus (African catfish), and to establish the antibiotic susceptibility of fish bacteria in Uganda. A total of 288 fish samples from 40 fish farms (ponds, cages, and tanks) and 8 wild water sites were aseptically collected and bacteria isolated from the head kidney, liver, brain and spleen. The isolates were identified by their morphological characteristics, conventional biochemical tests and Analytical Profile Index test kits. Antibiotic susceptibility of selected bacteria was determined by the Kirby-Bauer disc diffusion method. The following well-known fish pathogens were identified at a farm prevalence of; Aeromonas hydrophila (43.8%), Aeromonas sobria (20.8%), Edwardsiella tarda (8.3%), Flavobacterium spp. (4.2%) and Streptococcus spp. (6.3%). Other bacteria with varying significance as fish pathogens were also identified including Plesiomonas shigelloides (25.0%), Chryseobacterium indoligenes (12.5%), Pseudomonas fluorescens (10.4%), Pseudomonas aeruginosa (4.2%), Pseudomonas stutzeri (2.1%), Vibrio cholerae (10.4%), Proteus spp. (6.3%), Citrobacter spp. (4.2%), Klebsiella spp. (4.2%) Serratia marcescens (4.2%), Burkholderia cepacia (2.1%), Comamonas testosteroni (8.3%) and Ralstonia picketti (2.1%). Aeromonas spp., Edwardsiella tarda and Streptococcus spp. were commonly isolated from diseased fish. Aeromonas spp. (n = 82) and Plesiomonas shigelloides (n = 73) were evaluated for antibiotic susceptibility. All isolates tested were susceptible to at-least ten (10) of the fourteen antibiotics evaluated. High levels of resistance were however expressed by all isolates to penicillin, oxacillin and ampicillin. This observed resistance is most probably intrinsic to those bacteria, suggesting minimal levels of acquired antibiotic resistance in fish bacteria from the study area. To our knowledge, this is the first study to establish the occurrence of several bacteria species infecting fish; and to determine antibiotic susceptibility of fish bacteria in Uganda. The current study provides baseline information for future reference and fish disease management in the country.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.3
• /
• pp.181-189
• /
• 2002

A series of multicomponent $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{1-x}Fe_{x}$ (x=0.00, 0.08, 0.15, 0.22, and 0.30) alloys are prepared and their oystal structure and P-C-T curves are examined. The electrochemical properties of these allqys such as activation conditions, discharge capacity, cycling performance are also investigated. $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{1-x}Fe_{x}$ (x=0.00, 0.08, 0.15, 0.22 and 0.30) have the C14 Laves phase hexagonal structure. The electrode was activated by the hot-charging treatment. The best activation conditions were the current density 120 mA/g and the hot-charging time 12h at $80^{\circ}C$ in the case of the alloy with x=0.00. The discharge capacity increased rapidly until the fourth cycle and then decreased. The discharge capacity increased again from the 13th cycle, arriving at 234 mAh/g at the 50th cycle. The discharge capacily just after activation decreases with the increase in the amount of the substituted Fe but the cycling performance is improved. The discharge capacity after activation of the alloy with x=0.00 is 157 mAh/g at the current density 120 mA/g. $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{0.85}Fe_{0.15}$ is a good composition with a medium quantity of discharge capacities and a good cycling performance. The ICP analysis of the electrolyte for these electrodes after 50 charge-discharge cycles shows that the concentrations of V and Zr are relatively high. Another series of multicomponent $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{0.85}M_{0.15}$ (M = Fe, Co, Cu, Mo and Al) alloys are prepared. They also have the C14 Laves phase hexagonal structure. The alloys with M = Co and Fe have relatively larger hydrogen storage capacities. The discharge capacities just after activation are relatively large in the case of the alloys with M = Al and Cu. They are 212 and 170 mAh/g, respectivety, at the current density 120mA/g. The $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{0.85}Co_{0.15}$ alloy is the best one with a relatively large discharge capacity and a good cycling performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.05a
• /
• pp.11-11
• /
• 2009

종래의 산업폐수 처리기술로는 중금속 함유 폐수에 수용성의 금속염을 첨가하여 가성소다 혹은 소석회를 이용하여 pH를 조정하고 고분자 응집제를 첨가하여 금속의 수산화물을 생성시켜 이를 부상 혹은 침전시켜 Sludge화하여 제거하는 방법이 주로 사용되고 있다. 그 외 질소, 인, 유기물이 함유된 폐수의 경우에는 Biological Oxidation Techniques, 활성탄 흡착방식이 주로 채택되고 있다.[1-3] 이러한 폐수처리기술은 화학약품 사용량이 과다하고 이는 Sludge 생성량을 증대하고 2차 폐수처리가 필요로 하는 경우가 많고, 처리장이 면적이 넓어야 하고 대용량의 Sludge 제거창치가 필요하여 고비용의 처리공정으로 문제점을 가지고 있다.[2-3] 이에 본 연구에서는 이러한 기존 기술의 문제점을 보완할 수 있고 기존 기술로는 완벽하게 처리하기 곤란한 악성 폐수들에 대한 새로운 고도처리기술로 초전도 마그네트를 이용한 고구배 자기분리기술에 대한 기초연구를 하였다. 본 연구에서 사용한 고구배 자기분리 시스템은 무헬륨 전도냉각방식으로 자기분리를 위해 사용한 필터는 SUS 430 재질의 메쉬 형태로 제작하여 실험하였다. 또한, 자기분리 처리를 위한 전처리 공정으로는 응집제를 첨가하여 자기분리 효율을 높이고자 하였다. 자기분리 처리대상수로는 포항제철에 압연 강판에 사용되는 냉각수를 대상으로 자기분리 처리에 대한 효과를 실험하였다. 또한, 자기분리에 대한 특성을 평가하기 위해 강자성의 $Fe_3O_4$ 미세자성분말을 첨가하여 처리수내의 들어있는 유기물질에 대해 자기분리 자장 및 유속에 대한 처리효율을 미치는 영향을 조사하였다. 자기분리 처리는 1~6 Tesla에서 자기필터는 디스크 형태로 다층으로 연속적으로 적층하였으며, 처리유속은 1~4 l/min으로 하였다. 고농도인 처리폐수를 자가분리 인가 자장에 따라 처리하여 고농도에서는 70%, 저농도에서는 98 %까지 처리되었다. 또한, 자기분리용 필터는 SUS 430 재질의 mesh 망을 사용하였으며 인가자장 및 유속변화에 대한 실험 결과 탁도 및 농도는 필터 크기의 영향은 거의 차이가 없었으며 단지 인가자장 및 유속에 따라서 지수적으로 감소하였다. 자기분리된 용액 내 $Fe_3O_4$ 입도 분석 결과 자기분리 이전에 분포하던 $10\sim20\;{\mu}m$의 입자는 거의 제거되었으며 2 ${\mu}m$ 이하의 입자들은 실험 횟수에 따라 점점 직경이 작은 쪽으로 분포가 좁아졌으며, 마그네타이트의 자화율을 분석한 결과 약 0.8 Tesla에서 포화 되었으며 처리수의 탁도 및 농도가 자장에 따라 감소하는 것으 알 수 있었다.