• 센서학회지
• /
• 제30권2호
• /
• pp.99-104
• /
• 2021

In this study, we utilized the duty factor of the transition frequency modulation (TFM) for the illumination control of the light emitting diode (LED) light in visible light communication (VLC). The average optical power is linearly proportional to the duty factor in TFM waveforms. We used the transition frequencies of Na=5 and Nb=1 for the high and the low bits, respectively, of the non-return-to-zero (NRZ) data in the VLC transmitter. A resistor and capacitor high-pass filter (HPF) was used in the VLC receiver to eliminate the 120 Hz optical noise from adjacent lighting lamps and the spikes at the HPF output were used to recover NRZ data from the TFM waveform. In experiments, the illumination of the LED light was controlled in the range of 25-90% of the constant-wave optical power by changing the duty factor of the TFM waveforms.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.59-60
• /
• 2021

The unit-water content has a major problem in concrete structures which leads to micro cracks on the concrete during drying time. Thus, the compressive strength and durability of the concrete structures are significantly reduced. Several techniques have been developed to measure the unit-water content in concrete structures such as heating drying, unit volume mass, and capacitance measurements. However, these techniques have problems in during measurement such as longer time, expensive and difficult in analysis of data. Frequency Domain Reflectivity (FDR) is one of the sensors which used to measure the water content. This method has several advantages including easy to measure, inexpensive, and capable of measuring moisture in real time. In this study, an attempt has been made to evaluate the unit-water content in concrete using the FDR sensor and interpret the data with deep learning method.

• 한국해안해양공학회지
• /
• 제12권4호
• /
• pp.203-209
• /
• 2000

영산강하구언과 영암 및 금호방조제 건설과 같은 대규모 간척사업에 따라 목포해역에는 조석확폭현상이 발생되어 저지대 침수를 야기한바 있다. 목포항에서의 조위자료를 검토해 보면 방조제 건설단계별로 평균만조위 뿐 아니라 고극조위가 \"jump\"된 현상을 볼 수 있다. 따라서 기존 설계조위를 전면적으로 재검토해야 할 필요성이 제기되어 왔다. 이때 빈도해석에 이용되는 자료는 현재상태인 금호방조제 건설이후의 자료에 국한되어야 한다. 그러나 고극조위 극치분석에 사용될 수 있는 자료는 아직까지 6년 정도에 불과하기 때문에 정상적인 빈도해석에는 문제가 있는 것이다. 본 연구에서는 수치모형을 이용해 과거자료를 현재자료로 변환시켜 적용하는 방안을 제안하였으며, 이에 따라 32년 간의 변환된 자료와 6년 간의 최근자료 등 총 38년 간의 풍부한 자료를 이용하여 정상적인 빈도해석이 가능하게 되었다. 가능하게 되었다.

• 한국지능시스템학회논문지
• /
• 제19권1호
• /
• pp.145-151
• /
• 2009

유비쿼터스 네트워크의 실현을 위한 4세대 통신방식의 유력한 후보로 부상하는 OFDM (Orthogonal Frequency Division Multiplexing) 통신방식이 육상에서 주목받고 있으며, 고속 데이터 전송을 위한 Wireless LAN의 표준기술로 확정되어 있다. 해상통신의 경우에서도 OFDM 통신방식은 VHF 대역을 이용한 데이터 전송방식으로 제안되고 있으며 ITU (International Telecommunication Union)는 해상통신에서 32-point FFT (Fast Fourier Transform)를 사용하도록 권고하고 있다. 해상 통신에서는 해양사고 및 조난 시에도 통신이 이루어져야 하는 한계상황을 고려하면 OFDM 통신시스템의 중요 디바이스인 FFT는 저전력으로 동작되어야 한다. 따라서 본 논문에서는 OFDM 방식의 중요 디바이스인 32-point FFT를 저전력으로 동작시키기 위해 radix-2와 radix-4를 이용하여 저전력 32-point FFT 알고리즘을 제안한다. 최적화된 설계로 32-point FFT를 저전력 동작이 가능하도록 설계하였으며, 제안한 알고리즘은 VHDL (VHSIC hardware description language)로 구현하고 FPGA (field-programmable gate array) Spartan3 board에 장착하여 Matlab의 이론값과 비교, 검증하였다.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.980-988
• /
• 2019

When compared with traditional power frequency generators, the frequency of a super high-speed permanent magnet generator (SHSPMG) is a lot higher. In order to study the influence of frequency on the electromagnetic field of SHSPMGs, a 60000rpm, 117kW SHSPMG was taken as a research object. The two-dimensional finite element model of the generator was established, and the two-dimensional transient field of the generator was simulated. In addition, a test platform of the generator was set up and tested. The reliability of the simulation was verified by comparing the experiment data with that of the simulation. Then the generator electromagnetic field under different frequencies was studied, and the influence mechanism of frequency on the generator electromagnetic field was revealed. The generator loss, voltage regulation rate, torque and torque ripple were analyzed under the rated active power load and different frequencies. The influences of frequency on the eddy current density, loss, voltage regulation rate and torque ripple of the generator were obtained. These conclusions can provide some reference for the design and optimization of SHSPMGs.

• 한국컴퓨터정보학회논문지
• /
• 제18권12호
• /
• pp.21-26
• /
• 2013

본 논문에서는 분자영상의 궁극적 목표를 달성하기 위하여 분자영상의 특징 추출 기법을 제안하였다. 실험영상을 DWT 변환결과로 실험한 결과 1레벨과 2레벨의 분해 결과에서는 저주파 영역의 성분이 나타나지만 3레벨 분해 결과에서는 데이터 성분이 거의 나타나지 않음을 알 수 있었다. 육안으로 관찰은 되지 않지만 3레벨 분해한 결과의 데이터 값을 출력하였다. 데이터의 출력은 DWT에 의하여 나타나는 저주파영역의 수평방향과 수직방향의 데이터, 고주파영역의 수평방향의 데이터와 수직방향의 데이터, 대각고주파영역의 수평방향과 수직방향의 데이터를 출력하여 분자영상과 다른 디지털영상인 CT, MRI, PET영상의 데이터와 비교할 수 있게 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.1-10
• /
• 2018

Wide-area monitoring of tree-related high impedance fault (THIF) efficiently contributes to increase reliability of large-scaled network, since the failure to early location of them may results in critical lines tripping and consequently large blackouts. In the first place, this wide-area monitoring of THIF requires managing the placement of sensors across large power grid network according to THIF detection objective. For this purpose, current paper presents a framework in which sensors are distributed according to a predetermined risk map. The proposed risk map determines the possibility of THIF occurrence on every branch in a power network, based on electrical conductivity of trees and their positions to power lines which extracted from spectral data. The obtained possibility value can be considered as a weight coefficient assigned to each branch in sensor placement problem. The next step after sensors deployment is to on-line monitor based on moving data window. In this on-line process, the received data window is evaluated for obtaining a correlation between low frequency and high frequency components of signal. If obtained correlation follows a specified pattern, received signal is considered as a THIF. Thereafter, if several faulted section candidates are found by deployed sensors, the most likely location is chosen from the list of candidates based on predetermined THIF risk map.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.782-785
• /
• 2006

The Power Flow Analysis(PFA) can be effectively used to predict structural vibration in medium-to-high frequency range. In this paper, Power Flow Finite Element Method (PFFEM) based on PFA has been used to predict the vibration of an automobile door. The predicted results for the frequency response function of the door have been compared with corresponding experimental results. In the experiment, the automobile door has been divided into several subsystems and the loss factor of each subsystem has been measured. The input mobility at a source point has been also measured. The data for the loss factors and the input mobility have been used as the input data to predict the vibration of the automobile door with PFFEM. The frequency response functions have been measured over the surface of the door. The comparison between the experimental results and the predicted results for the frequency response functions showed that PFFEM could be an effective tool to predict the structural vibration.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권2호
• /
• pp.201-209
• /
• 2023

Time comparison techniques are required for generating and keeping Coordinated Universal Time (UTC) and to distribute standard clocks. These techniques play an important role in various fields, including science, finance, military, and communication. Among these techniques, Two-Way Satellite Time and Frequency Transfer (TWSTFT) ensures a relatively high accuracy, with a time comparison accuracy at a nanosecond level. However, TWSTFT systems have some limitations, such as the dependency on extra network links. In this paper, we propose an improved method for TWSTFT system operation and design a message structure for the suggestion. Additionally, we estimate the data rate and redundancy for the new TWSTFT signal with the designed message structure.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 1999년도 춘계 공동학술발표회
• /
• pp.90-93
• /
• 1999

We present a high frequency electromagnetic (EM) inversion scheme for detecting and characterizing a fracture using single-hole data. At high frequencies, say above tens of mega-hertz, since displacement currents cannot be ignored, electrical permittivity as well as electrical conductivity is to be considered together for analyzing the EM scattering data. In this paper, we have developed a three-step inversion scheme to map the fracture and to evaluate its electrical conductivity and permittivity. We performed EM profiling along the z-axis using three-component receivers for each source. The model was excited by a vertical magnetic dipole and the resistant magnetic fields were inverted using the non-linear least-squares method. Background resistivity and permittivity were easily obtained using vertical magnetic fields below 1 MHz and above 10 MHz, respectively. Both the vertical and dipping sheets were successfully mapped using the phase difference between 40 and 41 MHz. The electrical property of the sheet was well resolved using the information obtained in the previous two steps and secondary magnetic fields. Our study shows the potential of imaging the fracture in single-hole survey environment using the high frequency EM method.