• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.33-43
• /
• 2019

A comparison between sea trial measurements and full-scale CFD results is presented for two self-propelled ships. Two ships considered in the present study are: a general cargo carrier at Froude number $F_n=0:182$ and a car carrier at $F_n=0:254$. For the general cargo carrier, the propeller rotation rate is fixed and the achieved speed and trim are compared to sea trials, while for the car carrier, the propeller rotation rate is adjusted to achieve the 80% MCR. In addition, three grids are used for each ship in order to assess the grid refinement sensitivity. All simulations are performed using the Naval Hydro pack based on foam-extend, a community driven fork of the OpenFOAM software. The results demonstrate the possibility of using high-fidelity numerical methods to directly calculate ship scale flow characteristics, including the effects of free surface, non-linearity, turbulence and the interaction between propeller, hull and the flow field.

• 대한간호학회지
• /
• 제51권6호
• /
• pp.648-660
• /
• 2021

Purpose: This study aimed to develop an emerging infectious disease (COVID-19) simulation module for nursing students and verify its effectiveness. Methods: A one-group pretest-posttest quasi-experimental study was conducted with 78 under-graduate nursing students. A simulation module was developed based on the Jeffries simulation model. It consisted of pre-simulation lectures on disaster nursing including infectious disease pandemics, practice, and debriefings with serial tests. The scenarios contained pre-hospital settings, home visits, arrival to the emergency department, and follow-up home visits for rehabilitation. Results: Disaster preparedness showed a statistically significant improvement, as did competencies in disaster nursing. Confidence in disaster nursing increased, as did willingness to participate in disaster response. However, critical thinking did not show significant differences between time points, and neither did triage scores. Conclusion: The developed simulation program targeting an infectious disease disaster positively impacts disaster preparedness, disaster nursing competency, and confidence in disaster nursing, among nursing students. Further studies are required to develop a high-fidelity module for nursing students and medical personnel. Based on the current pandemic, we suggest developing more scenarios with virtual reality simulations, as disaster simulation nursing education is required now more than ever.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.7-15
• /
• 2015

This paper attempts to evaluate the accuracy and efficiency of a design optimization procedure by combining wavelets-based multi resolution analysis method and proper orthogonal decomposition (POD) technique. Aerodynamic design procedure calls for high fidelity computational fluid dynamic (CFD) simulations and the consideration of large number of flow conditions and design constraints. Thus, even with significant computing power advancement, current level of integrated design process requires substantial computing time and resources. POD reduces the degree of freedom of full system by conducting singular value decomposition for various field simulations. In this research, POD combined Design Optimization model is proposed and its efficiency and accuracy are to be evaluated. For additional efficiency improvement of the procedure, multi resolution analysis method is also being employed during snapshot constructions (POD training period). The proposed design procedure was applied to the optimization of wing aerodynamic performance. Throughout the research, it was confirmed that the POD/MRA design procedure could significantly reduce the total design turnaround time and also capture all detailed complex flow features as in full order analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.557-561
• /
• 2014

In this work, Altair Engineering's vibroacoustic modeling approach is used to simulate the acoustic signature of a simplified automobile in a wind tunnel. The modeling approach relies on a two step procedure involving simulation and extraction of acoustic sources using a high fidelity Computational Fluid Dynamics (CFD) simulation followed by propagation of the acoustic energy within the structure and passenger compartment using a structural dynamics solver. The tools necessary to complete this process are contained within Altair's HyperWorks CAE software suite. The CFD simulations are performed using AcuSolve and the structural simulations are performed using OptiStruct. This vibroacoustics simulation methodology relies on calculation of the acoustic sources from the flow solution computed by AcuSolve. The sources are based on Lighthill's analogy and are sampled directly on the acoustic mesh. Once the acoustic sources have been computed, they are transformed into the frequency domain using a Fast Fourier Transform (FFT) with advanced sampling and are subsequently used in the structural acoustics model. Although this approach does require the CFD solver to have knowledge of the acoustic simulation domain a priori, it avoids modeling errors introduced by evaluation of the acoustic source terms using dissimilar meshes and numerical methods. The aforementioned modeling approach is demonstrated on the Hyundai Simplified Model (HSM) geometry in this work. This geometry contains flow features that are representative of the dominant noise sources in a typical automobile design; namely vortex shedding from the passenger compartment A-pillar and bluff body shedding from the side view mirrors. The geometry also contains a thick poroelastic material on the interior that acts to reduce the acoustic noise. This material is modeled using a Biot material formulation during the structural acoustic simulation. Successful prediction of the acoustic noise within the HSM geometry serves to validate the vibroacoustic modeling approach for automotive applications.

• 대한조선학회논문집
• /
• 제59권3호
• /
• pp.141-148
• /
• 2022

A hybrid turbulence model has developed by combining a sub-grid scale model using dynamic k equation in LES with k-𝜔 SST model of RANS equation. To ascertain potential applicability of the hybrid turbulence model, fully developed turbulent channel flows at Re_𝜏=180 have been simulated of which computational domain has a top wall with coarse cells and a bottom wall with fine cells. The streamwise mean velocity and turbulent intensity profiles showed a good agreement with DNS data when using the hybrid model rather than using a single model in k-𝜔 SST or dynamic k equation models. Computational simulations of turbulent flows around KVLCC2 with a pre-swirl duct have been mainly performed using the hybrid turbulence model. Compared to the results obtained from RANS simulation with k-𝜔 SST model as well as LES with dynamic k equation SGS model, turbulent wakes of the duct in the present simulation using the hybrid turbulence model were very similar to that of LES. Also, the resistances acting on hull, rudder and duct in hybrid turbulence model were similar to those in RANS simulation whereas the viscous forces acting on the hull in LES had a significant error due to coarse cells inappropriate to the sub-grid scale model.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.283-300
• /
• 2009

The characteristic response of a structure to blast load may be divided into two distinctive phases, namely the direct blast response during which the shock wave effect and localized damage take place, and the post-blast phase whereby progressive collapse may occur. A reliable post-blast analysis depends on a sound understanding of the direct blast effect. Because of the complex loading environment and the stress wave effects, the analysis on the direct effect often necessitates a high fidelity numerical model with coupled fluid (air) and solid subdomains. In such a modelling framework, an appropriate representation of the blast load and the high nonlinearity of the material response is a key to a reliable outcome. This paper presents a series of calibration study on these two important modelling considerations in a coupled Eulerian-Lagrangian framework using a hydrocode. The calibration of the simulated blast load is carried out for both free air and internal explosions. The simulation of the extreme dynamic response of concrete components is achieved using an advanced concrete damage model in conjunction with an element erosion scheme. Validation simulations are conducted for two representative scenarios; one involves a concrete slab under internal blast, and the other with a RC column under air blast, with a particular focus on the simulation sensitivity to the mesh size and the erosion criterion.

• 한국통신학회논문지
• /
• 제34권2A호
• /
• pp.132-138
• /
• 2009

무선인지 기술은 비어있는 스펙트럼을 검출하고 이를 사용하여 통신하는 기술로서 주파수 부족 현상을 해소하기 위한 방안으로 활발히 연구가 이루어지고 있다. 무선인지 기술을 도입하기 위해 핵심적인 요소는 부사용자가 주사용자의 통신을 방해하지 않으면서 주파수 사용의 효율성을 최대화하는 것이다. 이를 위해서는 주사용자의 스펙트럼 점유 여부를 정확하게 판단하는 센싱 기술이 필요하다. 각각의 부사용자가 독립적으로 센싱을 수행하는 개별 센싱 기술은 음영지역, 잠복 터미널 문제 등이 있어서 최근 여러 부사용자가 협력하여 센싱을 수행하는 협력 스펙트럼 센싱 기술이 주목받고 있다. 본 논문은 협력 스펙트럼 센싱에 있어서 각 부사용자가 개별적으로 센싱한 결과의 경판정 값을 취합하여 이를 효과적으로 결합하는 방법을 제안한다. 제안한 방법은 과거의 협력 센싱 결과를 이용하여 각 부사용자의 개별 센싱 결과에 신뢰도를 나타내는 가중치를 부여하여 결합함으로써 협력 센싱 성능을 향상시킨다. 다양한 환경에서 제안한 방법의 검출 성능을 평가하여 기존의 가중치 없는 경판정 결합 방법과 비교한 결과를 제시한다.

• 시스템엔지니어링학술지
• /
• 제18권2호
• /
• pp.58-74
• /
• 2022

Deterministic accident analysis plays a central role in the nuclear power plant (NPP) safety evaluation and licensing process. Traditionally the conservative approach opted for the point kinetics model, expressing the reactor core parameters in the form of reactivity and power tables. However, with the current advances in computational power, high fidelity multi-physics simulations using real-time code coupling, can provide more detailed core behavior and hence more realistic plant's response. This is particularly relevant for transients where the core is undergoing reactivity anomalies and uneven power distributions with strong feedback mechanisms, such as reactivity initiated accidents (RIAs). This work addresses a RIA, specifically a control element assembly (CEA) withdrawal at power, using the multi-physics analysis tool RELAP5/MOD 3.4/3DKIN. The thermal-hydraulics (TH) code, RELAP5, is internally coupled with the nodal kinetics (NK) code, 3DKIN, and both codes exchange relevant data to model the nuclear power plant (NPP) response as the CEA is withdrawn from the core. The coupled model is more representative of the complex interactions between the thermal-hydraulics and neutronics; therefore the results obtained using a multi-physics simulation provide a larger safety margin and hence more operational flexibility compared to those of the point kinetics model reported in the safety analysis report for APR1400. The systems engineering approach is used to guide the development of the work ensuring a systematic and more efficient execution.

• 항공우주시스템공학회지
• /
• 제18권1호
• /
• pp.99-107
• /
• 2024

본 논문은 도심 항공 모빌리티 환경에서 응급상황 발생 시 비상 대응이 가능한 시스템을 제안한다. 탑승자의 심박수를 실시간으로 모니터링하고 이상 감지 시, 모스 부호화된 진동과 음성으로 경고하는 생체신호 감응형 스마트 워치를 개발하였으며. 관제시스템을 가정한 ROS 환경과 통신하여 도심 항공 모빌리티 운용 중 인근 버티포트 비상착륙을 위한 최단 경로 생성 시스템을 구현하였다. 실제 지역을 기반으로 한 고 충실도 시뮬레이션 환경 구축과 테스트로 안정성을 확인하였으며, 결과적으로 도심 항공 모빌리티의 안정과 편의를 향상시킬 수 있는 기술을 개발하였다.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.199-215
• /
• 2024

The Caynarachi Bridge is a 130 m long posttensioned steel-concrete composite bridge built in Peru. The structural performance of this bridge under construction loads is reviewed in this paper using numerical simulation. Hence, a numerical model using shell finite elements to trace its deformational behavior at service conditions is proposed. The geometry and boundary conditions of the superstructure are updated according to the construction schedule. Firstly, the adequacy of the proposed model is validated with the field measurements obtained from the static truck load test. Secondly, the study of other scenarios less explored in research are performed to investigate the effect of some variables on bridge performance such as time effects, sequence of execution of concrete slabs and type of supports conditions at the abutments. The obtained results show that the original sequence of execution of the superstructure better behaves mechanically in relation to the other studied scenarios, yielding smaller stresses at critical cross sections with staging. It is also demonstrated that an improper slab staging may lead to more critical stresses at the studied cross sections and that casting the concrete slab at the negative moment regions first can lead to an optimal design. Also, the long-term displacements can be accurately predicted using an equivalent composite resistance cross section defined by a steel to concrete modulus ratio equal to three. This article gives some insights into the potential shortcomings or advantages of the original design through high-fidelity finite element simulations and reinforces the understating of posttensioned composite bridges with staging.