• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1086-1094
• /
• 2020

AThis paper measured real sea area for performance analysis according to distance from west sea and south sea of Korea. The performance of the underwater OFDM system was analyzed by comparing the performance of the West and South Seas by adjusting the number of data repetitive transmissions and the pilot symbol placement interval parameters based on the real-sea data measured from the distance and Data rate of the West and South Sea vessels. In conclusion, when comparing the performance of the South Sea at the Data rate and distance, the BER performance of the South Sea was similar at the 5 km South Sea and 1 km West Sea under the same conditions. Placement interval of pilot symbol at 10 km of South Sea and 3 km of West Sea is (𝚫f, 𝚫t) = (6, 3) and the number of times the PRB is (R_f, R_t) = (2, 1) repeated. We confirmed that we can send high data over long distances in the South Sea.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.23-28
• /
• 2005

The signal in wireless multi-path channel is affected by fading and ISI because of high data rate transmission, so the signal has the high error rate. The present modulation and demodulation method of DSRC system can not expect sufficient for providing data service over 1 Mbps, so the channel equalization and advanced modulation and demodulation methods are required. OFDM is generally known as an effective technique for high data rate transmission system, since it can prevent ISI by inserting a guard interval. However, a guard interval longer than channel delay spread has to be used in each OFDM symbol period, thus resulting a considerable loss in the efficiency of channel utilization Therefore the equalizer is necessary to cancel ISI to accommodate advanced ITS service with higher bit rate and longer channel delay spread condition In this paper, the channel equalizer for the OFDM -DSRC system was designed and its performance in a multi-path fading environment was evaluated with computer simulation.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.289-294
• /
• 2017

A high-performance time-division multiplexing (TDM) -based multiuser (MU) multiple-input multipleoutput (MIMO) system for efficient indoor visible-light communication (VLC) is presented. In this work, a MIMO technique based on RGB light-emitting diodes (LEDs) with selection combining (SC) is utilized for data transmission. That is, the proposed scheme employs RGB LEDs for parallel transmission of user data and transmits MU data in predefined slots of a time frame with a simple and efficient design, to schedule the transmission times for multiple users. Simulation results demonstrate that the proposed scheme offers an approximately 6 dB gain in signal-to-noise ratio (SNR) at a bit error rate (BER) of $3{\times}10^{-5}$, as compared to conventional MU single-input single-output (SISO) systems. Moreover, a data rate of 66.7 Mbps/user at a BER of $10^{-3}$ is achieved for 10 users in indoor VLC environments.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.865-870
• /
• 2001

For pneumatic system control, we need a data transmission system with high speed and high reliability or information interchange between main computer and solenoid valves and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition we developed a communication protocol for construction of RS-485 based multidrop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is possible up to 1,000m without using repeater. In addition, the system developed in this research is proved to be used easily for extension of a communication network because of its module structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1518-1526
• /
• 1993

It has been known that the amplifiers for high power signal in satellite communication channels suffer from nonlinear distortions, which reduce the performance of the communication channel significantly. In order to compensate the nonlinear distortion, a new data predistortion method with the LMS algorithm is proposed in this paper, Whereas the previous approach handles this problem by assigning corresponding predistorter to each symbol for the case of 16-QAM, the proposed approach uses the same memory for the symbols, which have identical amplitudes, and predistors the input of high-power amplifiers by the amplitude and phase differences, resulting in better adaptive data predistorter with small number of digital memory (3 predistorters) and fast convergence rate. Superiority of the proposed approach in the paper is demonstrated by comparing it with the previous approach.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.212-220
• /
• 2014

The current cellular communications are optimized for low mobility users, meaning that their performance is degraded at high speed. Therefore, passengers in a high-speed train experience very poor radio link quality due to the significantly large number of simultaneous handovers. In addition, wireless data traffic is expanding exponentially in trains, subways and buses due to the widespread use of smartphones and mobile devices. To solve the inherent problem of cellular communication networks and meet the growing traffic demand, this paper proposes the mobile hotspot network of a millimeter-wave communication system as a mobile wireless backhaul. This paper describes the physical layer design of uplink and downlink in the proposed system, and the performances of uplink and downlink are evaluated under Rician fading channel conditions. The implemented baseband prototype of the proposed millimeter-wave communication modem is presented. This system can provide a Gbps data rate service in high-speed trains carrying hundreds of wireless Internet users.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.32-36
• /
• 2016

In this paper, a transceiver of VLC (Visible Light Communication) using LED white lighting has been implemented. We analyzed differences between conventional wireless communication and VLC with high-speed data transmission in a variety of environments, and confirmed symbols which passed through a channel using QAM. In order to get a high data rate, we found some variables that should be considered essentially though experiments. In addition, we set a bandwidth and found an optimal gain according to the distance between transmitter and receiver. We analyzed proposed system model through Labview and finally showed a system performance and to efficient data transmission and detection for VLC, we apply the orthogonal sequences to VLC system.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.2
• /
• pp.63-67
• /
• 2008

Purpose: To study the route of information on eye-health and the practical rate for college students. Methods: 292 college students' data were examined by SAS of questionnaire. Results: College students mainly gained the information on eye-health from the optician's shop (45.21%), mass communication (27.74%), and ophthalmic clinic (14.38%). The rate of satisfaction of informations from those routes was high. Especially, the satisfaction of the information from the optician's shop was very high (85.60%). Visual acuity corrected students mainly gained the information from the optician's shop (55.50%), and non-corrected students gained mainly from mass communication (43.56%). The practical rate of the information was high (70.21%). The practical rate of the information gained from the optician's shop was very high (76.52%). Conclusions: Many College students gained the information on eye-health from the optician's shop. The rate of satisfaction and the practical rate in optician's shop was higher than the other routes.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.121-124
• /
• 2005

The High Rate Wireless Personal Area Networks (WPAN) is mainly targeted to consumer electronics and portable communication devices which need high rates and QoS. To achieve these goals, the WPAN provides data rates up to 1Gbps and adopts a Time Division Multiple Access (TDMA) MAC protocol. Since IEEE 802.15.3 MAC is based on TDMA scheme, it has good performance in dealing with real traffics. But it does not give better results for dynamic traffic. For dynamic traffic, IEEE 802.15.3 MAC needs a kind of request and response policy that brings about the degradation of performance in order to adapt to network changes. To overcome this problem and enhance the data throughput, this paper proposes a superframe structure which uses the Enhanced Contention Access Period (ECAP) to transmit data during sleep-CTA in PM mode.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.523-529
• /
• 2009

Smart sensor is known as intelligent sensor, it is different with other conventional sensors in the case of intelligent system embedded on it. Smart sensor has many benefits e.g. low-cost in usage, self-decision and self-diagnosis abilities. This sensor consists of perception element(sensing element), signal processing and technology of communication. In this work, a bridge and structure of smart sensor has been investigated to be capable to condition monitoring routine. This investigation involves low power consumption, software programming, fast data acquisition ability, and authoritativeness warranty. Moreover, this work also develops smart sensor to be capable to perform high sampling rate, high resolution of ADC, high memory capacity, and good communication for data transfer. The result shows that the developed smart sensor is promising to be applied to various industrial fields.