• Computers and Concrete
• /
• 제19권5호
• /
• pp.527-535
• /
• 2017

In this study, an aging deformation statistical model for a unique high and steep rock slope was proposed, and the aging characteristic of the slope deformation was better reflected. The slope displacement was affected by multiple-environmental factors in multiple scales and displayed the same tendency with a rising water level. The statistical model of the high and steep rock including non-aging factors was set up based on previous analyses and the study of the deformation and residual tendency. The rule and importance of the water level factor as a non-aging unit was analyzed. A partitioned statistical model and mutation model were established for the comprehensive cumulative displacement velocity with the monitoring study under multiple factors and multiple parameters. A spatial model was also developed to reflect and predict the whole and sectional deformation character by combining aging, deformation and space coordinates. A neural network model was built to fit and predict the deformation with a high degree of precision by mastering its feature of complexity and randomness. A three-dimensional finite element model of the slope was applied to approach the structure character using numerical simulations. Further, a three-dimensional finite element model of the slope and dam was developed, and the whole deformation state was analyzed. This study is expected to provide a powerful and systematic method to analyze very high, important and dangerous slopes.

• Structural Engineering and Mechanics
• /
• 제57권1호
• /
• pp.1-20
• /
• 2016

On the basis of the geological conditions of high and steep mountainous slope on which an exit portal of an express railway tunnel with a bridge-tunnel combination is to be built, the composite structure of the exit portal with a bridge abutment of the bridge-tunnel combination is presented and the stability of the slope on which the express railway portal is to be built is analyzed using three dimensional (3D) numerical simulation in the paper. Comparison of the practicability for the reinforcement of slope with in-situ bored piles and diaphragm walls are performed so as to enhance the stability of the high and steep slope. The safety factor of the slope due to rockmass excavation both inside the exit portal and beneath the bridge abutment of the bridge-tunnel combination has been also derived using strength reduction technique. The obtained results show that post tunnel portal is a preferred structure to fit high and steep slope, and the surrounding rock around the exit portal of the tunnel on the high and steep mountainous slope remains stable when rockmass is excavated both from the inside of the exit portal and underneath the bridge abutment after the slope is reinforced with both bored piles and diaphragm walls. The stability of the high and steep slope is principally dominated by the shear stress state of the rockmass at the toe of the slope; the procedure of excavating rockmass in the foundation pit of the bridge abutment does not obviously affect the slope stability. In-situ bored piles are more effective in controlling the deformation of the abutment foundation pit in comparison with diaphragm walls and are used as a preferred retaining structure to uphold the stability of slope in respect of the lesser time, easier procedure and lower cost in the construction of the exit portal with bridge-tunnel combination on the high and steep mountainous slope. The results obtained from the numerical analysis in the paper can be used to guide the structural design and construction of express railway tunnel portal with bridge-tunnel combination on high and abrupt mountainous slope under similar situations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.891-894
• /
• 2010

Steep slope disasters accompany economic loss along with casualties, so the evaluation and the systematic management on the regions with slope collapse danger are required. A lot of manpower, time, and economic cost are needed to accumulate disaster history of steep slope areas by the national and small-sized region. As the method for this, it construed location data about each area with disaster occurrence by maknd elocation data of collapsed steep areas through high-resolution satellite image and collectnd edata on the regions with disasters through media and literature data such as a disaster annual report and a disaster comprehensive report. The study selected three shortest routes includnd ethe area with disaster in Jeolla province on literature and the collapsed area found by the image data, and constructed the results of the field survey as database.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.921-926
• /
• 2010

To examine saturation characteristics of an unsaturated soil in the steep slope area with collapse, it separated dry season from rainy season and measured water content and permeability, and measured permeability by using a tension infiltrometer in the site. In addition, it conducted electrical resistivity survey to look into thickness of ground and geological structure of underground. The collapsed slope increased depth of weathered zone compared to upper slope, and there electrical resistivity anomalous zone caused by the filtrated underground water was observed. The permeability of the collapsed area was observed high compared to upper and lower slopes of retarding basin without collapse, and the permeability measured by dividing the dry season and rainy season was measured high in case of dry season.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.125-132
• /
• 2017

The slope of the road in the forest area has a characteristic of steep slope, so natural disasters such as slope collapse occur. The slope displacement observation technique according to landslide is being studied as a method to observe a wide area and a method to observe a small area. This is a study on high-precision digital map generation using ground LiDAR. It is possible to create a high - precision digital map by minimizing the US side using the 3D LiDAR in the steep slope area where the GPS and Total Station measurement are difficult in the maintenance of the danger slope area. It is difficult to objectively evaluate whether the contour lines generated by LiDAR are correct and it is considered necessary to construct a test bed for this purpose. Based on this study, if terrain changes such as landslides occur in the future, it will be useful for measuring slope displacement.

• 한국지반환경공학회 논문집
• /
• 제15권9호
• /
• pp.77-85
• /
• 2014

현재 소방방재청에서는 국가재난관리시스템(NDMS, National Disaster Management System)을 운영 중에 있으나 급경사지정보의 입력 및 관리를 위한 기능이 단순한 DB 입력 관리 기능으로 존재하고 있어 신속하고 체계적인 급경사지 관리에 어려움이 존재하고 있는 실정이다. 최근 빈번한 국지성 집중호우에 의한 우면산 산사태, 춘천 산사태 등의 대규모 산사태가 증가하고 있어 급경사지의 위험도가 급증하고 있으며, 국가 재해 재난이 빠른 추세로 증가하고 있다. 이에 대한 선제적 대응 및 관리의 고도화를 위해서는 급경사지 방재 및 관리를 위한 GIS 기반의 급경사지정보 통합관리시스템의 개발이 필요하다. 본 연구에서는 급경사지 재해 재난에 대한 선제적 대응 및 안전한 관리를 위한 국가 차원의 GIS 기술 기반의 급경사지정보 통합관리시스템을 개발하였다. 급경사지정보 통합관리시스템은 급경사지 일제조사서기반의 지표면정보와 지하공간정보의 입력 및 출력 DB를 설계 구축하여 개발하였다. 본 연구를 통하여 개발한 급경사지정보 통합관리시스템은 지표면정보 입력모듈, 급경사지 주변 지하공간정보 DB 실시간 연계 입력모듈, V-World 배경지도 기반의 급경사지 검색 분석 관리를 위한 GIS 모듈, 급경사지정보 통합정보시스템 사용자 관리모듈, 급경사지정보 활용 연계시스템과의 실시간 연계 인터페이스모듈로 구성된다. 또한 개발한 급경사지정보 통합관리시스템에 대하여 자료저장률, 동시접속 시 시스템 안정성, 처리속도의 일관성에 대한 안정성테스트를 수행하여 급경사지정보 통합관리시스템의 연결성을 확보하였다.

• 한국지반환경공학회 논문집
• /
• 제17권5호
• /
• pp.5-16
• /
• 2016

A rainfall induced slope failure is a common natural hazard in mountainous areas worldwide. Sudden and rapid failures which have a high possibility of occurrence in a steep slope are always the most dangerous due to their suddenness and high velocities. Based on a series of experiments this study aimed to determine a critical angle which could be considered as an approximate threshold for a sudden failure. The experiments were performed using 0.42 mm mean grain size sand in a 200 cm long, 60 cm wide and 50 cm deep rectangular flume. A numerical model was created by integrating a 2D seepage flow model and a 2D slope stability analysis model to predict the failure surface and the time of occurrence. The results showed that, the failure mode for the entire material will be sudden for slopes greater than $67^{\circ}$; in contrast the failure mode becomes retrogressive. There is no clear link between the degree of saturation and the mode of failure. The simulation results in considering matric suction showed good matching with the results obtained from experiment. A subsequent discarding of the matric suction effect in calculating safety factors will result in a deeper predicted failure surface and an incorrect predicted time of occurrence.

• 화약ㆍ발파
• /
• 제26권2호
• /
• pp.38-44
• /
• 2008

최근에 국내의 도로건설계획은 기존도로의 선형을 개량하거나 변경하는 데에 중점을 두므로, 건설하고자 하는 도로는 보다 현재 직선화되고 있는 추세이다. 국내의 지형은 대부분 산악지로 구성되어 있어 도로선형의 직선화에 따라 많은 교량과 터널의 계획이 불가피하며, 일부 산악터널의 갱구부는 터널굴착시 작업공간이 협소한 가파른 지형을 갖는 산안 계곡에 위치하는 경우가 있다. 이와 같이 가파른 지형에 터널 갱구부 굴착시 대안으로 역방향 굴착을 들 수 있는데, 3가지의 중요한 고려사항이 있다. 첫째, 적정한 폭, 높이, 그리고 길이로 Pilot 터널을 계획하는 것이며, 둘째, 터널 갱구부의 편토압에 대한 영향을 평가하는 것이고, 셋째, 갱구부의 얕은 심도의 지반조건에 대한 터널 안전성을 확보하는 것이라고 할 수 있다. 따라서 본 연구는 3차원 수치해석에 의해 얻어진 결과를 토대로 역방향 굴착의 적정성 및 Pilot 터널의 적용 범위를 제안코자 한다. 해석결과 Pilot 터널은 터널 안쪽 $20{\sim}25m$ 지점 전부터 갱구부 쪽으로 굴착하는 것이 적정함을 보이고 있다.

• 동굴
• /
• 제4호
• /
• pp.3-9
• /
• 1996

Ondal cave is located in Ha-ri Yongchun - myon, Tanyang - gun, Chungchongbuk - do, which has its site at the valley of southern side of Namhangang which winds up to the southwest. Namsan is kurungbong which is at the mid - slope of the steep and high mountain, Songsan which is 427 m high above sea level, and shows the aspect of the limestone area, a rough and steep mountain one.(omitted)

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.930-939
• /
• 2009

Most of steep slope failures occurring in Korea have appeared during the localized heavy rain period, whereas the evaluation model of a disaster vulnerability analysis that has been proposed to date, has been prepared in consideration only of external factors comprising geographical features. This study calculated a wetness index and a contributory area which delivers moisture to the upper slant surface during the rainfall period, and also conducted a disaster vulnerability analysis in consideration of the convergence of surface water as well as the water system created during the occurrence of rainfall by including a curvature that shows a close relevance with the shape of the minute water system that is created temporarily during the occurrence of rainfall and with the convergence and divergence of surface water. When compared with a steep slope failure occurring within a selected model district in order to verify the prepared disaster analysis, a landslide occurring in the model district had emerged in a region in which the disaster vulnerability analysis was high and the density of the minor water system was also high. If these research results are extended nationwide, it is the most effective to use a disaster vulnerability analysis and the density of the minute water system; and it is supposed to be the simplest and the most effective method for preparing a disaster analysis of mountainous land shape such as the model district.