• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.82-82
• /
• 2002

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.57-57
• /
• 2016

• Journal of the Korean Magnetics Society
• /
• v.20 no.4
• /
• pp.153-159
• /
• 2010

Magnetic properties of basic rocks samples distributed in the seaside area of Ulleung island were investigated by means of X-ray fluorescence spectroscopy (XRF), M$\ddot{o}$ssbauer spectroscopy and SQUID magnetometer. We found that samples were typical basic rock which had the total amount of iron compounds varies from 10.6 wt% to 14.5 wt% depending on the different regions by XRF. The M$\ddot{o}$ssbauer spectra and magnetic hysteresis behaviors of the samples show ferromagnetic properties due to hematite. Also, temperature dependences of magnetization at applied magnetic field of 1 T for samples show magnetic transitions at 41 K~60 K.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.3
• /
• pp.139-150
• /
• 2013

In order to effectively leach Fe from pyrite, the application of microwave energy and ammonia solution has been conducted. Pyrite transforms into hematite and pyrrhotite when treated with microwave radiation for 60 minutes, and in this time the highest amount of Fe was leached by the ammonia solution. Up to 99% of the Fe was leached when the experimental conditions were: 325-400 mesh particle size for the pyrite and 60 min. was the microwave exposure time. The ammonia leaching conditions were 0.3 M sulfuric acid, 2.0 M ammonium sulfate and 0.1 M hydrogen peroxide concentration. The pyrite, hematite, and pyrrhotite were not detected using XRD analysis from the solid-residues treated by the ammonia solution except for quartz.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.227-232
• /
• 2009

Fe compounds of scoria samples distributed in the western seaside area of Jeju island were investigated by means of X-ray fluorescence spectroscopy (XRD), X-ray diffractometry (XRF) and $^{57}Fe$ Mossbauer spectroscopy. The samples were prepared from five parasite volcanos. We found that the samples were a typical basalt from the contents ratio of $SiO_2,\;Al_2O_3$ and Fe, and that they were silicate minerals. Underwater volcanoes scoria samples are shown only doublets in Mossbauer spectra and others scoria samples are shown sextets due to hematite and magnetite. And the balence state of Fe in the underwater volcanoes scoria samples are chiefly 2+ charge state with a little of the 2+ charge state. But the balence state of Fe in the others scoria samples are chiefly 3+ charge state.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.768-778
• /
• 1996

Iron oxide (hematite, $\alpha$-${Fe}_{2}{O}_{3}$) particles were prepared directly from aqueous solution using a crystal growth controller. Paticles properties and reaction mechanisum of products as a function of basicity, formation process and mechanism of needle-lkie hematite were investigated. hexagonal hermatite particles were formed in teh range below pH 9.0, ellipsoidal or rectangular hematite particles in the range of pH 10.75-11.75 respectively. In the range above pH 12.50, acicular $\alpha$-FeOOH was formed. Basicity of product solution produced in the range of pH 10.7511.75 was increased slightly as compared with basicity of reastants due to hydroxly ion(OH-) formed by dissociation crystal growth controller. Citric acid which is acted as a crystal growth controller was adsorbed in the form of itrate anion(R-COO-) on the ferric hydroxide and exerted important role on the formation to the needle-like $\alpha$-${Fe}_{2}{O}_{3}$ particles in this reaction system.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.4
• /
• pp.219-236
• /
• 2022

Wood-based nanocomposite electrode materials were synthesized for application in supercapacitors by mixing nanostructured hematite (Fe₂O₃) with highly porous activated carbon (AC) produced from the wood-waste of Pinus roxburghii. The AC was characterized using various instrumental techniques and the results showed admirable electrochemical properties, such as high surface area and reasonable porosity. Firstly, AC was tested as an electrode material for supercapacitors and it showed a specific capacitance of 59.02 Fg^-1 at a current density of 1 Ag^-1, cycle life of 84.2% after 1,000 cycles (at a current density of 3 Ag^-1), and energy density of 5.1 Wh/kg at a power density of 135 Wkg^-1. However, when the AC was composited with different ratios of Fe₂O₃ (1:1, 2:1, and 1:2), there was an overall improvement in its electrochemical performance. Among the 3 ratios, 2:1 (AC:Fe₂O₃) had the best specific capacitance of 102.42 Fg^-1 at 1 Ag^-1, cycle life of 94.4% capacitance after 1,000 cycles (at a current density of 3 Ag^-1), and energy density of 8.34 Wh/kg at a power density of 395.15 Wkg^-1 in 6 M KOH electrolyte in a 3-electrode experimental setup with a high working voltage of 1.55 V. Furthermore, when Fe₂O₃ was doubled, 1:2 (AC:Fe₂O₃), the electrochemical capacitive performance of the electrode twisted and deteriorated due to either the accumulation of Fe₂O₃ particles within the composite or higher bulk resistance value of pure Fe₂O₃.

• Structural Engineering and Mechanics
• /
• v.87 no.5
• /
• pp.499-516
• /
• 2023

To defend against harmful gamma radiation, new types of materials for use in the construction of heavyweight concrete (HWC) are still needed to be developed. This research introduces new materials to be employed as a partial replacement for fine aggregate (FA) to manufacture high-performance heavyweight concrete (HPHWC). These materials include hematite, black sand, ilmenite, and magnetite, with substitution ratios of 50% and 100% of FA. In this research, the hardening and fresh characteristics of HPHWC were obtained. Concrete samples' Gamma-ray linear attenuation coefficient was evaluated utilizing a gamma source of Co-60 through the thicknesses of 2.5, 5, 7.5, 10, 12.5, and 15 cm. High temperatures were studied for HPHWC samples, which were exposed to up to 700℃ for two hours. Energy-dispersive x-rays and a scanning electron microscope carried out microstructure analyses. Magnetite as an FA attained the lowest compressive strength of 87.1 MPa, but the best radiation protection characteristics and the highest density of 3100 kg/m³ were achieved. After 28 days, the attenuation efficiency of concrete mixtures was increased by 6.5% when fine sand was replaced with black sand at a ratio of 50%. HPHWC, which contains hematite, black sand, ilmenite, and magnetite, is designed to reduce environmental and health dangers and be used in medicinal, military, and civil applications.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.778-782
• /
• 2007

This study investigated the dechlorination mechanisms of TCE by Fe(II) associated with cement. Batch slurry experiments were peformed to investigate the behaviors of selected ions; Fe(II), Fe(III), $Ca^{2+}$, $SO_4^{2-}$ in cement/Fe(II) system. The kinetic experiments of TCE in cement/Fe(II) systems showed that injected Fe(II) was mostly sorbed on cement within 0.5 day and 90% of injected 200 mM sulfate was sorbed on cement within 0.5 day when $[TCE]_0$ = 0.25 mM and $[Fe(II)]_0$ = 200 mM. The kinetic experiments of TCE in hematite/CaO/Fe((II) systems were conducted for simulation of cement/Fe(II) system. Calcium oxide that is one of the major components in cement hydration reactions or has a reactivity in limited conditions. Hematite assumed the ferric iron oxide component of cement. The reactivities observed in hematite/CaO/Fe(II) system were comparable to those reported for cement/Fe(II) systems containing similar molar amounts of Fe(II). The behavior of Fe(II) and $SO_4^{2-}$ sorbed on solid phase at an early stage of reaction in hematite/CaO/Fe(II) system was similar to that of cement/Fe(II) system. Ferric ion was released from hematite at an early period of reaction at low pH. The experimental evidence of kinetic test using hematite/CaO/Fe(II) system implies that the reactive reductant is a mixed-valent Fe(II)-Fe(III) mineral, which may be similar to green rust. Fe(II) sorbed on cement can be converted to new mineral phase having a reactivity such as Fe(II)-Fe(III) (hydr)oxides in cement/Fe(II) systems.

• Journal of the Korean Magnetics Society
• /
• v.26 no.6
• /
• pp.213-218
• /
• 2016

This study reviewed mineral composition on Scoria samples of this area, atomic value state of oxidized steel, and magnetic property in order to look into characteristics of scoria that was distributed in southern area of mountainous areas, Halla Mt. of Jeju Island. By XRD analysis, mineral composition was confirmed, and characteristics of iron compounds existed in samples were investigated through $M{\ddot{o}}ssbauer$ spectroscope. Composing minerals could be learnt as feldspar basalt from XRD analysis because composting minerals were composed of quartz and feldspar anorite mainly, and iron compounds were made up with olivine, pyroxene, ilmenite, hematite, and magnetite. By $M{\ddot{o}}ssbauer$ spectroscope analysis on these iron compounds. it consisted of hematite and magnetite which showed hyperfine magnetic field of sextet mostly, and also doublet by olivine, pyroxene, ilmenite could be seen as appearing together. As a result of comparing with samples of Jeju western area having been announced in previous research, I.S. and Q.S. values of olivine, $Fe^{2+}$, were 122 mm/s and 3.09~3.13 mm/s respectively, and a fact could be known that $Fe^{2+}$ olivine having similar structure each other was contained, and the ratio of $Fe^{3+}/Fe_{tot.}$. was 85.90~92.82 %. From these findings, it was able to be presumed that they belonged to samples having been formed on the land at the same period of time. As a result of investigating area ratio of tetrahedron (A site) and octahedron (B site) regarding magnetite in samples, it was turn out to be 0.22~0.55 less than 2.