• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.70-74
• /
• 2009

The helicopter development technology is improved by the increasing of computing power and advanced test facilities. The increasing efficiency of fuel consuming by the developing of improved lift-to-drag rotor system is the major issue, the noise reduction for ecology(civil area) and increase of survivability to reduce noise detection(battlefield) also are important. This investigation shows the helicopter external noise flight test methods, conventional military helicopter's(UH-60) experimental results and the numerical modeling method for aero-acoustic of rotor blade and the result of CAA(Computational Aero-Acoustic) for main rotor blade.

• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.63-69
• /
• 2006

The operational environment of helicopters extends from the civil air traffic control system to remote and hazardous areas and from day operations under visual flight conditions to night operations in adverse weather. Helicopters can move in any direction, remain stationary while airborne, climb and descend vertically, and take off and land almost anywhere. Thus their range of maneuvers and control requirements vary more widely than do those of fixed-wing aircraft. In this study, I analyzed the job of helicopter pilot through methods of observation, and classified the required ability of them into the domain of cognitive, perceptual/spatial, psychomotor. I expect that the result of this study will be used to aid training and selection of helicopter pilot.

• 소음진동
• /
• 제10권2호
• /
• pp.229-239
• /
• 2000

To reduce the drag rise on the advancing helicopter rotor blade tips, the tip of the blade is modified to have sweep, anhedral and pretwist. The equations of motion of rotor blade with these tip angles were derived using Hamilton principle, programmed using FORTRAN and named as ARMDAS(Advanced Rotorcraft Multidisplinary Design and Analysis System). Rotating frequency analysis of rotor blades with swept tipe was performed that is necessary in conceptual and preliminary design phases of the helicopter design. Vibration analysis of non-rotating blades was also accomplished and compared with MSC/NASTRAN resutls for the basis of comparison with the vibration test data. The rotating frequency analysis of blades with an actual rotor blade data was also performed to verify coded program and to check the possibility of a resonance of an actual rotor blade at the specific rotating speed.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.22-32
• /
• 2007

This paper describes a study of a helicopter database for the sizing stage of a preliminary design process. The database includes specifications and performance parameters for more than 150 conventional single rotor helicopters currently in market. Design parameters, including configuration and weight parameters, have been analyzed and trend curve equations(regression equations) are derived using the regression analysis method. Finally, the applicability of this research result was verified whether the method is reliable for being adopted as a useful design tool in the early stage of a helicopter design process.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.36-41
• /
• 2011

Numerical simulation of air-launched rockets from a helicopter was conducted to investigate the aerodynamic interference between air-launched rocket and helicopter. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between rocket and rocket launcher. The flow solver was coupled with six degree-of-freedom equation to predict the trajectory of free-flight rockets. For the validation, calculations were made for the impinging jet with inclined plate. The rotor downwash of helicopter was calculated and applied to simulation of air-launched rocket. It is shown that the rotor downwash has non-negligible effect on the air-launched rocket and its plume development.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.548-555
• /
• 2007

기존의 헬리콥터 모델링은 주로 많은 가정들을 통한 수식 전개에 의존해 왔기 때문에 모델링이 어렵고, 특정 구간에서만 활용 가능하며, 모델링 구성이 바뀌면 많은 수정이 거쳐야 한다는 단점들이 제기되어 왔다. 본 연구에서는 다물체 동역학 기법을 적용한 헬리콥터 시뮬레이션 프로그램을 개발하여 AH-1 헬리콥터에 대한 모델링을 수행하였고, 또한 시뮬레이션 결과를 비행 시험 데이터 및 상용 헬리콥터 시뮬레이션 분석 도구인 FLIGHTLAB과 비교하여 그 가능성을 확인해 보았다.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.117-122
• /
• 2011

EMSS is the organic system offering quick and efficient transfer and treatment for those who need an emergency service. For EMS aviation operation is the important transportation for the common benefits. There are several types of aviation operation. Among the different types of the operations, helicopter operation is very common because it is free from any locations. Notwithstanding the benefit, various types of EMS helicopter accidents and incidents are occurred because of its poor operation condition. In South Korea, even though so much effort was put to decrease the accidents rates, there are still many accidents happening by fire helicopters and the forest service helicopters. Therefore, in order to regularize the EMSH operation, measures for the aviation safety have to be prepared. This research is, related to the EMSH, focused on the suggestion of safety measure for the EMSH in Korea based on the accidents analysis in various countries.

• 한국항공운항학회지
• /
• 제15권1호
• /
• pp.54-60
• /
• 2007

According to U.S. NTSB, from 1989 to 1992, Situation Awareness (SA) was a major factor causing 80% of all aircraft accidents in scheduled airlines. Therefore, the prevention of accidents through effective training in SA became a pivot in aviation safety. Furthermore, during the past 10 years, since all helicopter accidents in Korea were caused by the factors related to SA, an appropriate countermeasure has been required. This study, which uses survey data, examines various factors related to SA that could affect helicopter pilots. Recognition of and countermeasures for the factors in emergency situations were analyzed. The results show that, while the factors associated with SA and vigilance have lower correlations with each other, the factors associated with recognition, diagnosis, and generation and implementation of solutions have higher correlations with each other. Thus, the results demonstrate the need for better SA through educational training.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.378-387
• /
• 2017

The combined model following control (MFC)-decoupler system is employed for a full authority fly-by-wire utility helicopter to enhance handling qualities. The MFC, which governs the vehicle to follow the prescribed model, is widely employed for modern helicopters. However, it may not be sufficient as helicopters often suffer significant cross coupling. The coupled responses between control axes of a helicopter increase the pilot's work load and may degrade handling qualities. As the decoupler is introduced to the MFC, the combined MFC-decoupler effectively solves the coupling problems and enhances handling qualities. The proposed system is verified via the handling qualities prediction using the mathematical dynamics model. The analysis results are confirmed through the piloted simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.556-559
• /
• 1999

In this paper, the Observer Controller IDentification/Eigensystem Realization Algorithm(OCID/ERA) is applied to identify the state space model of a helicopter in hover from a given set of the general input-output data. The objective of this paper is the evaluation of the utility of the OCID/ERA approach to the system identification of a system which has natural unstable mode like a helicopter and to give some guidelines before applying the technique to the real system. As it mentioned above, since a model helicopter is unstable naturally, the closed-loop system identification method(OCID/ERA) using excitation, output and feedback signals of the simulated system is applied.