• Journal of the Ergonomics Society of Korea
• /
• v.29 no.5
• /
• pp.789-795
• /
• 2010

This study aimed to investigate the effect of differing heel height on static balance and muscle activation of ankle joint during standing. Twenty-one young females volunteered to participate in this study. To measure balance function and EMG activity of tibialis anterior and gastrocnemius muscles, the subjects were asked to perform 1-min standing with eyes open and closed state under 3 different heel heights: barefoot, 3cm, and 7cm each. During the standing, postural sway distance and area, and EMG activity of tibialis anterior and gastrocnemius muscles were significantly augmented with increasing heel height (p<0.05). For comparison between eyes open and closed in terms of postural sway area and EMG activity of tibialis anterior muscle, barefoot and 7cm height conditions respectively showed significant differences as well. The findings indicate that high-heeled shoes may have disadvantages in maintaining balance function because of extra-muscular effort of ankle joint. This study provides useful information that will inform future studies on how heel height affects muscle activity around the ankle joint in aspects of static and dynamic balance.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.1
• /
• pp.33-40
• /
• 2005

Gathering is method used to control fullness along a seam line. The purpose of this study was to investigate the relationship between the quantitative research and qualitative method; the effect of gather and the types of gather drape. The experimental design consists of four factors: (l) three kinds of different weight and thickness of fabrics (2) three kinds of stitch densities (3) five kinds of ratio of gathers (4) three kinds of grain directions. Therefore one hundred thirty five (135) samples were made. And utilized SPSS WIN 10.0 Package in data analysis. The results of this study were as follows; First, after frequency analysis, side height, hem line width, node depth, node count, node width accorded with these result data recording. Second, after correlation analysis, side height related with front statements. Side height and entire visual was negative correlation. Hem line width, node depth, node count with section statements was negative correlation but node width at section statements was positive correlation. Third, after $k^2$ analysis, front picture parts getting excellent evaluation were 1st side height, 3rd hem line width, 4th node depth, 3rd node count, 3rd node width. And section illustration parts getting excellent evaluation were 4th side height, 1st hem line width, 2nd node depth, 3rd node count, 4th node width.

• Physical Therapy Korea
• /
• v.21 no.2
• /
• pp.28-36
• /
• 2014

The purpose of this study was to evaluate the changes in the electromyographic (EMG) activity of the trunk and the lower limb muscles during quiet standing on an unstable surface while wearing low-heeled shoes (3 cm), high-heeled shoes (7 cm) and without footwear (0 cm) in 20 young healthy women. The subjects stood on an unstable surface for 30 seconds. We examined the differences in the EMG data of the erector spinae, rectus abdominis, biceps femoris, rectus femoris, tibialis anterior, and the gastrocnemius medialis muscle. A one-way repeated analysis of variance was used to compare the effects of shoe heel height on the EMG activity with the level of significance set at ${\alpha}=.05$. The EMG activity of the erector spinae and the rectus femoris were significantly increased (p<.05) in the subjects who wore elevated heel height, while the tibialis anterior and the gastrocnemius medialis were significantly decreased (p<.05). However, the rectus abdominis and the biceps femoris exhibited no significant difference among the three conditions. The above results indicate that wearing high-heeled shoes may change the postural strategy. The findings of this study suggest that excessive heel height could contribute to an increased fall risk during quiet standing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.5
• /
• pp.700-704
• /
• 2013

A study was conducted to investigate the effects of feeding medium chain triacylglycerol (MCT) on growth performance, plasma fatty acids, villus height and crypt depth in preweaning piglets. A total of 150 new born piglets were randomly assigned into one of three treatments: i) Control (no MCT); ii) MCT with milk (MCT+milk); iii) MCT without milk (MCT+fasting). Body weight, plasma fatty acid profiles, villus height and crypt depth were measured. Final BW for the Control and MCT+fasting was lower (p<0.05) than MCT+milk. The piglets fed with MCT regardless of milk provision or fasting had greater medium chain fatty acids (MCFA) than the Control. In contrast, the Control had greater long chain fatty acid (LCFA) and unsaturated fatty acid (USFA) than the MCT piglets. The piglets fed with MCT regardless of milk provision or fasting had higher villus height for the duodenum and jejunum after 6 h of feeding. Similar observations were found in piglets fed with MCT after 6 and 8 days of treatment. This study showed that feeding MCT to the piglets before weaning improved growth performance, with a greater concentration of MCT in blood plasma as energy source and a greater height of villus in duodenum, jejunum and ileum.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1199-1209
• /
• 2006

The purpose of this study was to analyze men's body sizes in order to develop men's garment sizing system. This study was based on the anthropometric measurements called Size-Korea, which was surveyed in year 2003 and 2004. The male subjects of the survey were 3215, who were from 18 to 69 years old. In the results, each age group had the statistically different mean of height from one another, which was inverse proportion to age. Analyzing with the height index values, Fifties had the biggest values in bust, waist and hip circumferences while Thirties had the biggest values when the circumferences were analyzed by its original measurements. Therefore, the consumers who wanted bigger sizes were Fifties instead of Thirties or Forties in case they had the same height. For the past 5 years, bust, waist, hip and waist-height were obviously increased and this phenomenon was remarkable at Twenties. The results of Correlation analysis showed that height, bust, waist, neck circumference were the key dimensions for the apparel sizing system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.178-186
• /
• 2002

3-D numerical studies are performed to investigate the effect of the trunk height and approaching air velocities on the pressure distribution of notchback road vehicle. For this purpose, the models of test vehicle with four different trunk heights are introduced and PHOENICS, a commercial CFD code, is used to simulate the flow phenomena and to estimate the values of pressure coefficients along the surface of vehicle. The standard k-$\xi$ model is adopted for the simulation of turbulence. The numerical results say that the height variation of trunk makes almost no influence on the distribution of the value of pressure coefficient along upper surface but makes very strong effects on the rear surface. That is, the value of pressure coefficient becomes smaller as the height is increased along the rear surface and the bottom surface. Approaching air velocity make no differences on pressure coefficients. Through the analysis of pressure coefficient on the vehicle surfaces one tried to assess aerodynamic drag and lift of vehicle. The pressure distribution on the rear surface affected more on drag and lift than pressure distribution on the front surface of the vehicle does. The increase of trunk height makes positive effects on the lift decrease but negative effects on drag reduction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.114-117
• /
• 2009

In this work, closing behavior of the voids generated in a casting process was investigated for various parameters such as reductions in height void size and billet rotation during hot open die forging process. The reduction in height and path schedule including the number of paths and billet rotation were chosen as key process variables to express the change of geometrical void shape and void closing behavior. On the other hand, values of die overlapping and die width ratio were set to be constant. Extend of void closure was observed and evaluated using tensile test and microscope. Based on the experimental result, it is ensured that void closure do not occur at 15% and 30% reduction in height as well as one or two rotations of a billet. The useful datum obtained from this study could be utilized to establish an optimum path schedule in the open die forging process.

• Wind and Structures
• /
• v.9 no.1
• /
• pp.23-35
• /
• 2006

The effect of buildings on flow in urban canopy is one of the most important problems in local/micro-scale meteorology. A large eddy simulation model is used to simulate the flow structure in an urban neighborhood and the bulk effect of the buildings on surrounding flows is analyzed. The results demonstrate that: (a) The inflow conditions affect the detailed flow characteristics much in the building group, including: the distortion or disappearance of the wake vortexes, the change of funneling effect area and the change of location, size of the static-wind area. (b) The bulk effect of the buildings leads to a loss of wind speed in the low layer where height is less than four times of the average building height, and this loss effect changes little when the inflow direction changes. (c) In the bulk effect to environmental fields, the change of inflow direction affects the vertical distribution of turbulence greatly. The peak value of the turbulence energy appears at the height of the average building height. The attribution of fluctuations of different components to turbulence changes greatly at different height levels, in the low levels the horizontal speed fluctuation attribute mostly, while the vertical speed fluctuation does in high levels.

• KCI Concrete Journal
• /
• v.12 no.1
• /
• pp.47-56
• /
• 2000

Once a structure fabricated with mass concrete is in a form of wall such as retaining wall, side walls of a concrete caisson and so on, cracks induced by hydration heat have been known to be governed by exterior restraints which are mainly related to the boundary conditions of the structure. However, it is thought that the degree of restraints can be alleviated considerably only if a lift height of concrete placement or a panel size of the wall is selected properly before construction. As a way of minimizing thermal cracking commonly observed in massive wall-typed structure, this study aimed at evaluating effects of geometrical configuration on the temperature rise and thermal stress through parametric study. Evaluation of the effect was also performed for cement types using anti-sulphate cement, blast furnace slag cement and cement blended with two mineral admixture and one ordinary Portland Cement. so called ternary blended cement. As a result of analytical study, it was found that a lift height of concrete placement is the most important factor in controlling thermal cracking in massive wall, and the increase of a lift height is not always positive to the crack occurrence as not expected.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.43-48
• /
• 2011

The article represents an experimental investigation on friction and turbulent flow characteristics of free airflow through a rectangular duct fitted with semicircular ribs of uniform height (e = 3.5 mm) on one principle wall. The aspect ratio of the rectangular duct was AR= 5 where the duct height (H) was of 30 mm. Four different rib pitches (P) of 28 mm, 35 mm, 42 mm and 49 mm were used for constant rib height to hydraulic diameter ratio (e/Dh = 0.07) and constant rib height to channel height ratio (e/H = 0.11). The experimental results show some significant effects on pressure drop as well as turbulent characteristics at various configurations among different numbers of rib arrangements varying Reynolds number in the range of 15000 to 30000. Pressure transducer and hot wire anemometer were used for data acquisition of this experiment.