• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.139-151
• /
• 2003

This study was to evaluate and to compare the compressive strength and the displacement effecting the abutment or the residual ridge which are transformed by the angle and the heights of the konus denture inner crown when restorating the unilateral konus denture by using the mandibular canine and the 1st premolar as an abutment. The author made 9 different models for different inner crown heights and konus angles. The inner crown height were divided to 5mm, 6mm, and 7mm and konus angles was divided to $4^{\circ}$, $6^{\circ}$, and $8^{\circ}$. And then in each model, 5kg of $15^{\circ}$ mesial load was stressed on the central fossa of the 1st premolar and the 1st molar. The stresses and displacement were measured using the finite element analysis. The results were as follows 1. The maximum compressive strength was shown on the connective area of the abutment and the denture base. 2. As the angle of the inner crown becomes increased, the compressive strength was shown smaller. 3. As the height of the inner crown becomes increased, the maximum compressive strength was shown smaller while the compressive strength of the root apex and the residual ridge showed larger. 4. When the stress was loaded only on the 1st premolar, the more compressive strength was concentrated on the root apex area of the 1st premolar. 5. When the stress was loaded only on the 1st premolar, the compressive strength was concentrated uniformly on the abutment and the residual ridge. 6. When the stress was loaded only on the 1st molar, the maximum displacement was shown on the distal part of the residual ridge.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.165-173
• /
• 2006

Purpose: With gold electroforming system fir the double crown, the secondary crown is electroformed directly onto the primary crown. An even thick layer of high precision can be acquired. It is thought that the retention of electroformed outer crown is primarily acquired by the adhesive force (surface tension) through the saliva which is interposed between precisely fitted inner and outer crown. The purpose of this study was to investigate the effect of taper and surface area of inner crown on the retentive force of electroformed outer crown according to the presence of saliva. Materials and methods: 32 titanium inner crowns with cervical diameter of 8 mm and cone angles of 0, 2, 4, 6 degrees, which had same surface area by regulated height, were machined on a lathe. Another 32 titanium inner crowns with cone angles of 0, 2, 4, 6 degrees, which had doubled surface area by increased cervical diameter. were fabricated. Eight specimens of each group, for a total of 64 titanium inner crowns, were prepared. The electroformed outer crowns were fabricated directly on the inner crowns by using electroforming machine(GAMMAT free, Gramm Technik, Germany). The tertiary frameworks were waxed-up on the electroformed outer crown and cast using nonprecious alloy($Rexillium^(R)III,\;Jeneric^(R)/Pentronh^(R)$ Inc., USA). The cast metal frameworks were sandblasted with alubimium oxides and cemented using resin cement(Superbond C&B, Sun Medical Co., Japan) over the electroformed copings of each specimen. Then, artificial saliva($Taliva^(R)$, Halim Pharm. Co., Korea) was sprayed between the inner and outer crown, and they were connected under 5 kg force. The retentive force was measured by the universal testing machine(Tinius Olsen 1000, Tinius Olsen, USA) with a cross-head speed of 66.67 mm/sec. The direction of cross-head travel was exactly aligned with the path of removal of the respective specimens. This measurement procedures for retentive force of electroformed outer crown with artificial saliva were repeated in the same way without presence of artificial saliva. Results and Conclusion: The following conclusions were drawn: 1. The retentive force of electroformed outer crown was decreased according to increased taper of inner crown(P<.05). 2. The retentive force of electroformed outer crown showed no significant differences according to surface area and the presence of artificial saliva(P>.05).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.161-168
• /
• 1999

A series of centrifuge model tests were performed in order to investigate the behaviors of various tunnel linings. A 1/100-scaled aluminum and hydrostone horseshoe tunnel linings with a radius km, height km were buried in a depth of C/D=3 with dry Joomunjin standard sand, the relative density of which was 86%. Bending moments and thrusts along the tunnel circumference were measured by 12 strain gages. Earth pressures in soil and on lining were estimated by pressure transducers, ground surface settlements at center and edges by using LVDTs. Average Ko(coefficient of earth pressure at rest) was 0.39 for the model sand. The structural behaviors of lining depended on its damaged conditions. But, as a rule, on the crown, the tensile circumferential strain of lining occurred at the inner surface, and the compressive at the outer surface, then positive bending moment was created at the crown. The circumferential strain of the inner surface on the springline was tensile, and the outer compressive, so negative bending moment was measured at the springline. For hydrostone linings, cracks initiated at the inner surface on the crown, and the outer on the springline over average 40g.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.143-148
• /
• 2004

The numerical analysis of the hard disk drive slider is presented. The pressure distribution was calculated using the finite element method. The generalized Reynolds equation was applied in order to include the gas rarefaction effect. The balance of the air bearing force and preload force was considered. The characteristics of the small vibrations near the equilibrium were studied using the perturbation method. Triangular mesh with variable element size was employed to model the two-rail slider. The flying height, pitching angle, rolling angle, stiffness and damping of the two-rail slider were calculated for radial position changing from the inner radius to the outer radius and for a wide range of the slider crown values. It was found that the flying height, pitching angle and rolling angle were increased with radial position while the stiffness and damping coefficients were decreased. The higher values of crown resulted in increased flying height, pitching angle and damping and decreased stiffness.

• 대한소아치과학회지
• /
• 제45권1호
• /
• pp.41-56
• /
• 2018

본 연구의 목적은 한국인의 상악 유중절치와 유측절치와 기성 지르코니아 크라운의 형태 및 크기를 3차원적으로 분석함으로써 가장 유사한 지르코니아 크라운을 선별하고 수복시 임상적 지침을 제시하는 것이다. 이를 위해 300명의 어린이의 건전한 상태의 상악 유중절치, 유측절치를 3차원 스캔하여 평균 형태를 재현하였고, 4개의 제조사(NuSmile $ZR^{(R)}$ Crown, Cheng $Crowns^{(R)}$, Kinder $Krowns^{(R)}$, EZ $Pedo^{(R)}$ Crown)의 지르코니아 크라운을 3차원 스캔하여 형태 및 크기 비교를 위한 좌표점을 측정하여 치아와 크라운 형태의 유사성을 평가하였다. 근원심 길이, 절단연에서 치경부까지의 길이, 치관 형태 비율, 같은 좌표에서 치아와 크라운의 거리, 순면의 곡률반경, 그리고 체적을 비교하여 최종적으로 가장 유사한 지르코니아 크라운을 선별하였다. 분석 결과, 상악 유중절치는 Cheng $Crowns^{(R)}$ 3번, 유측절치는 NuSmile $ZR^{(R)}$ Crown 2번이 가장 유사한 형태를 가졌으며, 이 크라운의 내면을 스캔하여 크라운 수복시 필요한 치아 삭제량을 평가한 결과, 기존의 제조사의 가이드라인으로 제시되어 있는 양보다 전반적으로 더 적은 치아 삭제를 시행하는 것을 제안할 수 있다.

• 한국환경생태학회지
• /
• 제24권2호
• /
• pp.157-165
• /
• 2010

본 연구는 일본 고베시 로코아일랜드 완충녹지의 공간기능별 지형구조, 식재개념, 식재구조를 조사분석하여 해안매립도시의 토지이용을 고려한 완충녹지 식재기법 연구 기초자료를 제공하고자 수행하였다. 로코아일랜드(총면적 580ha)는 대규모 완충녹지를 박스형으로 조성하여 외곽부의 항만물류 산업용지와 도시내부 도시기능용지로 구획되었다. 완충녹지 지형구조는 편향마운딩형, 병렬마운딩형, 복합마운딩형이었고, 북쪽의 녹지폭은 50m, 동쪽의 녹지폭은 8~32m, 서쪽의 녹지폭은 37.5m, 경사도는 $18\sim25^{\circ}$, 성토고는 2~15m이었다. 공간기능별 재개념은 해안측 사면부는 경관식재와 완충식재, 도시내부는 경관식재와 녹음식재를 적용하였다. 북측 완충녹지 식재구조 조사결과, 종가시나무, 녹나무, 후박나무, 녹보리똥나무 등 난온대 상록활엽수를 식재하였고, $100mm^2$단위의 종수 및 식재밀도는 최대 교목 9종 22주, 아교목 9종 15주, 관목 3종 67주로 전 층위 14종 104주이었다. 녹피율은 교목층 69~139%, 아교목층 26~38%, 관목층 6~7%, 전 층위 101~184%, 녹지용적계수는 교목층 $1.40\sim3.12m^3/m^2$, 아교목층 $0.43\sim0.55m^3/m^2$, 관목층 $0.06m^3/m^2$, 전 층위 $1.89\sim3.73m^3/m^2$이었다.