• 한국지리정보학회지
• /
• 제25권2호
• /
• pp.30-47
• /
• 2022

본 연구는 경상남도 창원시 도시지역을 대상으로 공간유형에 따른 찬공기 유동 특성을 분석하였다. 공간유형은 창원시 도시생태현황지도의 토지이용현황도와 건물 정보, 지형 특성을 활용하여 군집분석을 통해 분류하였다. 찬공기 유동은 KLAM_21 모델링을 활용하여 시간의 경과에 따른 찬공기 양과 풍속으로 분석하였다. 그 결과, 공간유형은 건물의 밀집도와 높이, 토지이용 유형, 그리고 지형 특성인 평지, 계곡, 능선, 경사지가 고려되어 총 14개 유형으로 분류되었다. 찬공기 유동은 도시 외곽의 산림지역 계곡부에서 찬공기가 생성되어 도로와 평지를 통해 이동하여 저지대인 창원국가산업단지에 축적되기 시작하고, 이후 도시지역 전반에 찬공기가 확산되는 것으로 나타났다. 건물이 높은 지역은 찬공기의 유동이 많았고, 경사지와 능선부는 찬공기 축적이 적어 유동량이 상대적으로 작았다. 본 연구결과는 건물 밀집도와 토지이용 유형, 지형 형태에 따른 찬공기 유동 특성 파악이 가능하였고, 이는 도시지역의 기후 완화 및 대기질 개선을 위한 도시 바람길 조성의 기초자료로 유용하게 활용될 것이다.

• 한국지구과학회지
• /
• 제36권1호
• /
• pp.109-124
• /
• 2015

레이더 반사도를 이용한 강수추정의 개선을 위해 새로운 접근 방식인 경북대학교에서 개발한 하이브리드 고도면을 이용한 강수량 추정기법(Hybrid Surface Rainfall, KNU-HSR)을 사용하였다. KNU-HSR기법은 지형에코와 레이더 빔차폐의 영향을 받지 않는 2차원 하이브리드 고도면에서의 반사도를 이용하여 강수량을 추정한다. 본 연구에서는 정적 HSR 및 동적 HSR기법이 사용되었으며 비교 검증되었다. 정적 HSR은 빔차폐지도와 지형에코지도를 사용하며, 동적 HSR은 정적 HSR에 추가적으로 실시간 퍼지로직 품질관리를 통한 품질지수지도를 사용한다. 검증을 위해 상관계수(correlation coefficient), 총비율(total ratio), 평균편의(mean bias), 정규화된 표준편차(normalized standard deviation), 평균 상대오차(mean relative error)를 사용하였으며, 10개 강우사례의 지상우량계 강우자료를 이용하여 두 HSR의 강우추정 성능을 평가하였다. 모든 검증지수에서 동적 HSR은 반사도 보정을 하지 않은 정적 HSR에 비해 더 우수한 성능을 보였다. 동적 HSR은 레이더로부터 근거리에서는 과대추정하였으며 원거리에서는 빔 폭 확장 및 빔 고도증가로 인해 과소추정하였다. 동적 HSR의 정규화된 표준편차와 평균상대오차는 레이더로부터의 거리에 관계없이 가장 좋은 결과를 보였다. 정적 HSR은 약한 강우강도에서 상당히 과대추정하였으나 동적 HSR은 모든 강우강도에서 1.0에 총비율을 보였다. 반사도의 시스템오차 보정 후, 동적 HSR의 정규화된 표준편차와 평균상대오차는 각각 약 20%와 15%로 개선되었다.

• 환경영향평가
• /
• 제4권2호
• /
• pp.71-91
• /
• 1995

In order to develop an appropriate set of criteria applicable for environmental impact assessment (EIA) of natural forest 8 items are proposed. The criteria are vegetation distribution area (DA), distribution pattern (DP), size (S), diameter of breast height of tree (DBH), humus (H), sustainment (ST), successional stage (SS) and impact of adjacent ecosystem (IAE), Each criterion has an interval which minimum 1 score to maximum 5 score Forest Evaluation Index (FEI) was obtained as the sum of 8 criteria value. Above 70% is considered to be absolutely conservative and from 50% to 70% range of total score is to be considered conservative. In the case of the Sancho˘ng Pumping-up Power Plant of Mt. Chiri, 8 criteria were applied base on actual vegetation map. Pinus densiflora community got 73%(29 scores) and Quercus variabilis - Q. serrata community got 60%(24 scores). This may be said that this local vegetation has high ecological potentiality. These criteria cannot always be absolutely evaluation tool. So it is expected to take the more time to be developed further, and holistically added by the other field such as fauna, geological feature etc.

• 한국환경과학회지
• /
• 제25권2호
• /
• pp.247-257
• /
• 2016

To predict annual energy production (AEP) accurately in the wind farm where located in Seongsan, Jeju Island, Equivalent wind speed (EQ) which can consider vertical wind shear well than Hub height wind speed (HB) is calculated. AEP is produced by CFD model WindSim from National wind resource map. EQ shows a tendency to be underestimated about 2.7% (0.21 m/s) than HB. The difference becomes to be large at nighttime when wind shear is large. EQ can be also affected by atmospheric stability so that is classified by wind shear exponent (${\alpha}$). AEP is increased by 11% when atmosphere becomes to be stabilized (${\alpha}$ > 0.2) than it is convective (${\alpha}$ < 0.1). However, it is found that extreme wind shear (${\alpha}$ > 0.3) is hazardous for power generation. This results represent that AEP calculated by EQ can provide improved accuracy to short-term wind power forecast and wind resource assessment.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.899-910
• /
• 2009

We classified wind sectors according to the wind features in South Korea. In order to get the information of wind speed and wind direction, we used and improved on the atmospheric numerical model. We made use of detailed topographical data such as terrain height data of an interval of 3 seconds and landuse data produced at ministry of environment, Republic of Korea. The result of simulated wind field was improved. We carried out the cluster analysis to classify the wind sectors using the K-means clustering. South Korea was classified as 8 wind sectors to the annual wind field.

• Wind and Structures
• /
• 제11권5호
• /
• pp.345-359
• /
• 2008

An experimental investigation of the flow over the rectangular body located in close proximity to a ground board was reported using the particle image velocimetry (PIV) technique. The present experiments were conducted in a closed-loop open surface water channel with the Reynolds number, $Re_H=1.2{\times}10^4$ based on the model height. In addition to the PIV measurements, flow visualization studies were also carried out. The PIV technique provided instantaneous and time-averaged velocity vectors map, vorticity contours, streamline topology and turbulent quantities at various locations in the near wake. In the vertical symmetry plane, the upperbody flow is separated from the sharp top leading edge of the model and formed a large reverse flow region on the upper surface of the model. The flow structure downstream of the model has asymmetric double vortices. In the horizontal symmetry plane, identical separated flow regions occur on both vertical side walls and a pair of primary recirculatory bubbles dominates the wake region.

• 한국농공학회논문집
• /
• 제56권1호
• /
• pp.81-88
• /
• 2014

Accurate wind data is essential for predicting airborne spread of virus. OpenFOAM was used for computational fluid dynamics (CFD) simulation procedure which is under GNU GPL (General Public License). Using complex terrain, DEM (Digital Elevation Map) that was prepared from GIS information covering a research site is converted to a three dimensional surface mesh that is composed by quad and full hexahedral space meshes. Around this surface mesh, an extended computational domain volume was designed. Atmospheric flow boundary conditions were used at inlet and roughness height and was considered at terrain by using rough wall function. Two different wind conditions that was relatively stable during certain periods were compared in 3 different locations for validating the accuracy of the CFD computed solution. The result shows about 10 % of difference between the calculated result and measured data. This procedure can simulate a prediction of time-series data for airborne virus spread that can be used to make a web-based forecasting system of airborne virus spread.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.631-634
• /
• 2006

Three main important sources for establishing GIS are the orthomap in scale 1:5 000 with Ground Sampling Distance of 0,5m; DEM/DTM data with height error of ${\pm}$1,0m and topographic map in scale 1: 10 000. The new era with Very High Resolution Satellite (VHRS) images as IKONOS, QuickBird, EROS, OrbView and other ones having Ground Sampling Distance (GSD) even lower than 1m has been in potential for producing orthomap in large scale 1:5 000, to update existing maps, to compile general-purpose or thematic maps and for GIS. The accuracy of orthomap generated from VHRS image affects strongly on GIS reliability. Nevertheless, orthomap accuracy taken from VHRS image is at first dependent on chosen sensor geometrical models. This paper presents, at fist, theoretical basic of the Rational Polynomial Coefficient (RPC) model installed in the commercial ImageStation Systems, realized for orthorectifying VHRS images. The RPC model of VHRS image is a replacement camera mode that represents the indirect relation between terrain and its image acquired on the flight orbit. At the end of this paper the practical accuracies of IKONOS and QuickBird image orthorectified by RPC model on Canadian PCI Geomatica System have been presented. They are important indication for practical application of producing digital orthomaps.

• 수산해양기술연구
• /
• 제50권1호
• /
• pp.39-49
• /
• 2014

Morphological and positional characteristics of anchovy aggregations, confirmed by trawling, were examined in two locations of the southern part of theWest Sea (T1) and the western side of South Sea (T11) of South Korea. Morphological characteristics (mean length, height and area) of the anchovy aggregations at T1 were smaller than those at T11, however the positional characteristics (distributional depth and bottom depth) of the aggregations at T1 were larger than those at T11. Diverse dataset such as the ship's cruise track, the cruse map, and interpolated three-dimensional-like water temperature were visualized in multiple dimensions. For a comprehensive understanding of the anchovy aggregations within their surrounding circumstances, the interpolated water temperature transferred to the location of anchovy aggregations at both stations were visualized based on geospatial information. Using quantitative investigation, the overall range of change in water temperature and salinity of anchovy aggregations at stations was considerably small. However, the water temperature and salinity of anchovy aggregations at T11 were somewhat higher than those at T1.

• 한국측량학회지
• /
• 제28권3호
• /
• pp.385-392
• /
• 2010

A LiDAR technique has the merits that survey engineers can get a large number of measurements with high precision quickly. Aerial photos and satellite sensor images are used for generating 3D spatial images which are matched with the map coordinates and elevation data from digital topographic files. Also, those images are used for matching with 3D spatial image contents through perspective view condition composed along to the designated roads until arrival the corresponding location. Recently, 3D aviation image could be generated by various digital data. The advanced geographical methods for guidance of the destination road are experimented under the GIS environments. More information and access designated are guided by the multimedia contents on internet or from the public tour information desk using the simulation images. The height data based on LiDAR is transformed into DEM, and the real time unification of the vector via digital image mapping and raster via extract evaluation are transformed to trace the generated model of 3-dimensional downtown building along to the long distance for 3D tract model generation.