• Journal of the Korean Society of Combustion
• /
• v.17 no.1
• /
• pp.48-57
• /
• 2012

Laminar lifted propane coflow-jet flames diluted with nitrogen were experimentally investigated to determine heat-loss-related self-excitation regimes in the flame stability map and elucidate the individual flame characteristics. There exists a critical lift-off height over which flame-stabilizing effect becomes minor, thereby causing a normal heat-loss-induced self-excitation with O(0.01 Hz). Air-coflowing can suppress the normal heat-loss-induced self-excitation through increase of a Peclet number; meanwhile it can enhance the normal heat-lossinduced self-excitation through reducing fuel concentration gradient and thereby decreasing the reaction rate of trailing diffusion flame. Below the critical lift-off height. the effect of flame stabilization is superior, leading to a coflow-modulated heat-loss-induced self-excitation with O(0.001 Hz). Over the critical lift-off height, the effect of reducing fuel concentration gradient is pronounced, so that the normal heat-loss-induced self-excitation is restored. A newly found prompt self-excitation, observed prior to a heat-loss-induced flame blowout, is discussed. Heat-loss-related self-excitations, obtained laminar lifted propane coflow-jet flames diluted with nitrogen, were characterized by the functional dependency of Strouhal number on related parameters. The critical lift-off height was also reasonably characterized by Peclet number and fuel mole fraction.

• Journal of Environmental Science International
• /
• v.20 no.7
• /
• pp.839-843
• /
• 2011

We have established a wind map of Singapore, a city-state characterized its land cover by urban buildings to confirm a possibility of wind farm development. As a simple but useful approximation of urban canopy, a zero-plane displacement concept was employed. The territory is divided into 15 sectors having similar urban building layouts, and zero-plane displacement, equivalent roughness height at each sector was calculated to setup a terrain boundary condition. Annual mean wind speed and mean wind power density map were drawn by a CFD micrositing model, WindSim where Changi International Airport wind data was used as an in-situ measurement. Unfortunately, predicted wind power density does not exceed 80 $W/m^2$ at 50 m above ground level which would not sufficient for wind power generation. However, the established Singapore wind map is expected to be applied for wind environment assessment and urban planning purpose.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.529-531
• /
• 2009

To construct the wind map for mainland Korea, the well designed atmospheric numerical modeling system was used. Three nest domains were construced with spatial resolutions between $10{\times}10km$ up to the hightest resolution of $1{\times}1km$. Parameterization schemes like MRF(PBL), RRTM(radiation), Grell(cumulus) were chosen since wind data simulated is in better agreement with the observed wind data. High-resolution atmospheric numerical model was applied to simulate the motion of the atmosphere and to produce the wind map around the South Korea. The results of several simulations were improved compare to the past system, because of using the fine geographical data, such as terrain height and land-use data, and the meteorological data assimilation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.389-392
• /
• 2000

Gouge-free tool-path generation is an important issue in mold & die machining and researches on cutter interference avoidance can be found in many articles. One of the various methods is construction of tool-offlet surface or cutter-location (CL) surface on which the cutter-center point (CL-point) locates. Provided that the CL surface is represented in a suitable form, cutter-interference avoidance can be performed without the burden of computing CL data for every cutter-contact (CC) point. In the paper, various methods of constructing a CL surface in the z-map form are presented, where z-map is a special form of discrete nonparametric representation in which the height values at grid points on the xy-plane are stored as a 2D array z［i,j］.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.4
• /
• pp.325-335
• /
• 2000

Gouge-free tool-path generation is an important issue in mold & die machining and researches on cutter interference avoidance can be found in many articles. One of the various methods is construction of tool-offset surface of cutter-location (CL) surface on which the cutter-center point (CL-point) locates. Provided that the CL surface is represented in a suitable form, cutter-interference avoidance can be performed without the burden of computing CL data for every cutter-contact (CC) point. In the paper, various methods of constructing a CL surface in the z-map form are presented, where z-map is a special form of discrete nonparametric representation in which the height values at grid points on the xy-plane are stored as a 2D array z[i,j].

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.135-140
• /
• 2015

The Cyber-Physical Systems (CPS) complexly perform modeling and simulation (M&S) for the various embedded systems. In this case, due to use diverse formatted models, we suggest to apply with the SEDRIS to systematically manage the different formatted data on M&S. The SEDRIS can reduce time and cost with reusing and interoperating environment data developed in the specific domain. To do this, we should input the data transformed the height map for terrain representation in a simulator into raster data of SEDRIS for which interoperate between the existed simulator and the SEDRIS. To solve the problem, we propose the transformation method to transfer the polygon data from RAW file used in terrain representation. With the proposed method, we can provide two advantages. First, it can possibly express the environment data into SEDRIS. Second, we can see the terrain like an image file through a viewer. Therefore, even non-expert easily constructs the terrain environment data.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.1
• /
• pp.45-56
• /
• 2015

In this paper, we study the relation between two dynamical systems (V, f) and (V, g) with $f{\circ}g=g{\circ}f$. As an application, we show that an endomorphism (respectively a polynomial map with Zariski dense, of bounded Preper(f)) has only finitely many endomorphisms (respectively polynomial maps) of bounded degree which are commutable with f.

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.55-63
• /
• 2019

Recently, the use of real-world image data has been increasing to express realistic virtual environments in various application fields such as education, manufacturing, and construction. In particular, with increasing interest in digital twins like smart cities, realistic 3D urban models are being built using real-world images, such as aerial images. However, the captured aerial image includes shadows from the sun, and the 3D city model including the shadows has a problem of distorting and expressing information to the user. Many studies have been conducted to remove the shadow, but it is recognized as a challenging problem that is still difficult to solve. In this paper, we construct a virtual environment dataset including the height map of buildings using 3D spatial information provided by VWorld, and We propose a new shadow detection method using height map and deep learning. According to the experimental results, We can observed that the shadow detection error rate is reduced when using the height map.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.12
• /
• pp.1699-1705
• /
• 2011

Magnesium ammonium phosphate (MAP) was recovered from swine wastewater and the feasibility of reutilizing it as a slowly-releasing fertilizer was evaluated. Maize growth was investigated with normal and high application rates of MAP and a fused super phosphate (FSP) fertilizer. A total of 5 treatments ($T_0$ = control, $T_1$ = MAP based on 30 kg P $ha^{-1}$, $T_2$ = FSP based on 30 kg P $ha^{-1}$+urea equivalent to nitrogen of MAP applied in $T_1$, $T_3$ = MAP based on 40 kg P $ha^{-1}$, $T_4$ = FSP based on 40 kg P $ha^{-1}$+urea equivalent to nitrogen of MAP applied in $T_3$) were arranged with 3 replications. In the case of height and circumference, significant differences were found between controls and treated maize plants (p<0.01). However, no statistical differences were found between MAP- and FSP-urea treated maize. Leaf area and green biomass yield were significantly (p<0.01) higher in the treated group than control. Leaf area was also found significantly higher (p<0.01) in the higher MAP- treated group (2,374 $cm^2$ $plant^{-1}$) than other treatments. $N_2O$ emission was found to be lower in MAP treated soil than that from FSP-urea treated soil, which might be due to the slow releasing pattern of MAP. It could be assumed from the results that MAP would be an eco-friendly sustainable fertilizer source for crop production.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.237-249
• /
• 2017

The Self-Organization Feature Map as an unsupervised network is very widely used these days in engineering science. The applied network in this paper is the Self Organization Feature Map with constant weights which includes Kohonen Network. In this research, Reinforced Concrete Shear Wall buildings with different stories and heights are analyzed and a database consisting of measured fundamental periods and characteristics of 78 RC SW buildings is created. The input parameters of these buildings include number of stories, height, length, width, whereas the output parameter is the fundamental period. In addition, using Genetic Algorithm, the structure of the Self-Organization Feature Map algorithm is optimized with respect to the numbers of layers, numbers of nodes in hidden layers, type of transfer function and learning. Evaluation of the SOFM model was performed by comparing the obtained values to the measured values and values calculated by expressions given in building codes. Results show that the Self-Organization Feature Map, which is optimized by using Genetic Algorithm, has a higher capacity, flexibility and accuracy in predicting the fundamental period.