• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.571-576
• /
• 2015

본 논문은 X-band 레이더 기반 파고추정 방법의 비교연구에 대한 내용으로, 신호 대 잡음비 및 음영비를 이용하였다. 신호대 잡음비의 경우 기존 파고 추정을 위한 방법으로 널리 사용되고 있으며, 음영비의 경우 새로이 제시되는 방법이다. 본 연구에 사용된 레이더 영상의 경우 울산 주전해안에서 계측된 자료이며, 기상청 등표에서 계측된 해양기상정보와 비교하였다. 자료는 약 34일동안 계측된 자료를 비교하였으며, 동해안 태풍 진출 기간 자료를 확보하여 다양한 파고분포에 대한 결과를 검증하였다. 분석 결과 음영비를 이용한 파고추정의 경우, 부이와의 보정이 필요 없는 장점과 실시간 파고 계측의 가능성을 확인하였으며, 일부 풍속, 타 물체 탐지 등 레이더 영상의 외적 요소에 의한 오차 발생의 요인을 파악하였다.

• 한국해안·해양공학회논문집
• /
• 제35권4호
• /
• pp.84-94
• /
• 2023

재현기간에 따른 설계주기 추정에는 일반적으로 파고-주기 관계곡선을 이용한다. 본 연구에서는 설계주기 추정을 위한 파고-주기 관계곡선의 매개변수를 선형, 로버스트 선형, 비선형 함수를 이용하여 추정하고 그 계수를 비교-평가하였다. 매개변수 추정에 사용한 자료는 해양수산부(2019) 설계파고 추정에 사용한 연 최대 파고-주기 자료이며, 태풍, 비태풍 조건으로 구분하여 매개변수 추정에 이용하였다. 추정 매개변수는 해역의 지점에 따라 뚜렷한 차이를 보였으며, 추정기법의 경우에는 태풍 조건의 자료의 경우 비선형과 선형 기법이 큰 차이를 보이고 있는 것으로 파악되었다. 또한 SPM 공식과 GODA 공식을 평균하여 추정하는 Suh et al.(2008, 2010) 제안 방법은 절편 매개변수는 과소추정, 경사 매개변수는 과대 추정하는 것으로 파악되었으며, 해역의 국지적인 특성 반영에는 한계가 있는 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• 산업기술연구
• /
• 제22권A호
• /
• pp.49-57
• /
• 2002

The accurate wind speed information at the hub height of a wind turbine is very essential to the exact estimation of the wind turbine power performance testing. Several methods on the site calibration, which is a technique to estimate the wind speed at the wind turbine's hub height based on the measured wind data using a reference meteorological mast, are introduced. A site calibration result and the wind resource assessment for the Taekwanryung test site are presented using a one-month wind data from a reference meteorological mast and a temporal mast installed at the site of wind turbine. From this analysis, it turns out that the current location of the reference meteorological mast is wrongly determined, and the self-developed codes for the site calibration are working properly. Besides, an analysis on the uncertainty allocation for the wind speed correction using site calibration is performed.

• Journal of Plant Biology
• /
• 제22권3호
• /
• pp.59-62
• /
• 1979

Distribution and standing crops of seedling and sapling as undergrowing tree were investigated in a Pinus rigida forest. The relative light intensity(RLI) on the ground level was 3.9∼59.3% which indicates a wide range. Under this range of RLI seedlings and saplings distribute well in the stand. Eight trees were selected from the stand, then measured dry weight of stem, branches and leaves using thestratified clip technique. A possible relationship between the diameter at the bottom of the tree (Do) and standing crops was investigated. As Do increased from 0.8cm (T1) to 7.2cm (T8), the standing crops also increased from 42.6g to 7,410.4g. Since semi-log values between Do and standing crops clearly indicates a straight line, there is close relationship between these two factors. Therefore it is possible to estimate the standing crops of seedling and sapling by measuring Do. Productive structure shows that phytosynthetic layer is located above the 1/2 height of the tree and maximum photosynthetic layer apperars on 2/3 level in height.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.141-146
• /
• 1999

An experimental study is carried out to estimate the effects of mixing and placing condition on the mechanical properties of anti-washout concrete. According to the test results, mixing method and placing temperature do affect the characteristics of rrsh concrete, while they do not affect the strength development of anti-washout concrete. But, concrete strength was greatly affected by the placing condition and placing height. Concrete strength decreases linearly as the placing height increased. Compared to the normal concrete, the increase in strength is not associated much with an increase in the elastic modulus of anti-washout concrete.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2250-2257
• /
• 2004

The accurate wind speed information at the hub height of a wind turbine is very essential to the exact estimation of the wind turbine power performance testing. Several methods on the site calibration, which is a technique to estimate the wind speed at the wind turbine's hub height based on the measured wind data using a reference meteorological mast, are introduced. A site calibration result and the wind resource assessment for the TaeKwanRyung test site are presented using three-month wind data from a reference meteorological mast and the other mast temporarily installed at the site of wind turbine. Besides, an analysis on the uncertainty allocation for the wind speed correction using site calibration is performed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1190-1197
• /
• 2009

Design parameters related to Yano's method(1984, 1985), one of experimental approaches having been used widely in Korea to estimate sedimentation and consolidation of dredged and reclaimed ground, were analyzed and their propriety were reassessed in this paper. Data analyses were performed on the basis of the settling test results using samples from the west coastal area of Korea. From analysis of results, for specific characteristics of these dredged and reclaimed marine soft clays, co-relations of initial water content - coefficient of sedimentation/ consolidation - initial setting velocity were evaluated. Relation between height of soil solid and surface height of slurry at the stages of initiation and termination of consolidation was also assessed. Finally ranges and average values of these design parameters were evaluated and typical empirical equations between these design parameters were also proposed.

• 대한수의학회지
• /
• 제53권2호
• /
• pp.73-76
• /
• 2013

The aim of this study was to produce a simple and inexpensive technique for estimating the obturator foramen area (OFA) from young calves based on the hypothesis that OFA can be extrapolated from simple linear measurements. Three linear measurements - dorsoventral height, craneocaudal width and total perimeter of obturator foramen - were obtained from 55 bovine hemicoxae. Different algorithms for determining OFA were then produced with a regression analysis (curve fitting) and statistical analysis software. The most simple equation was OFA ($mm^2$) = [3,150.538 + ($36.111^*CW$)] - [147,856.033/DH] (where CW = craneocaudal width and DH = dorsoventral height, both in mm), representing a good nonlinear model with a standard deviation of error for the estimate of 232.44 and a coefficient of multiple determination of 0.846. This formula may be helpful as a repeatable and easily performed estimation of the obturator foramen area in young bovines. The area of the obturator foramen magnum can thus be estimated using this regression formula.

• 대한정형도수물리치료학회지
• /
• 제9권1호
• /
• pp.19-28
• /
• 2003

Objectives : This study was to investigate the relationship analysis in VDT(visual display terminal) of work hours. Methods : Questionnaires were completed by 41 women in VDT operations. The information was used to estimate multiple regression for the VDT of work hours related factors association. Results : The prevalence of the VDT of work hours was significantly higher in the shoulder which followed by the neck, the hand and fingers, the arms, the lowback, the back. The VDT of work hours decreased with aging. The VDT of work hours increased with work duration, single, lower among habitual exercise. The desk height, the seat pan height, the posture on the sitting, the elbow angle all did not meet the recommended criteria. Conclusions : Data from this study support a statistically significant association with satisfaction for occupation.