• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.953-955
• /
• 2004

This paper describes the information transmission method using communication networks between Remote Terminal Unit(RTU) and Protection and Control system(PCU) of the direct current switchgear for Light Railway Vehicle, and also represents the test result, which carried out in the laboratory. In this test, transmission signal waveform, polling time, response time and request/response frame were measured between RTU and PCU. The field test including the measurements of analog signal and status of the digital logic operation of PCU will be conducted in near future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.224-226
• /
• 1997

This paper describes a procedure for the optimal design of induction motor for electric vehicle. The immune algorithm is applicated for the optimal solution search. To verify the validity of the proposed method, a example disign for output 20[kw] is performed.

• 대한교통학회지
• /
• 제30권1호
• /
• pp.75-83
• /
• 2012

동일한 수의 중차량 비율이 도로 용량에 미치는 영향이 고속도로 소통상태가 원활한 서비스수준 A와 그렇지 않은 서비스수준 E의 경우에 따라 같지 않음이 지적되고 있다. 우리나라 고속도로 용량산정 방법 역시 고속도로 운영 상태를 고려하지 않으며 중(重)차량 영향을 반영하고 있다. 본 연구는 고속도로 소통 상태별 중차량 비율이 도로 용량에 미치는 수준을 기초 시험 수준에서 진단한다. 서울 동부간선도로에서 총 15일 (360시간) 자료를 수집하였으며 이를 15분단위로 가공하여 분석하였다. 중차량 비율이 용량에 미치는 영향을 각 서비스수준별로 분석한 결과, 현재의 용량산정방법은 서비스수준 B~C에서 용량이 과소 추정되고, 서비스수준 E에서는 용량이 과대 추정되는 것을 확인하였다. 연구 결과는 현재의 도로용량편람에서 제시한 방안과는 달리 고속도로 소통상태를 반영하여 중차량 보정계수가 적용되어야 함을 의미한다.

• 한국융합학회논문지
• /
• 제7권1호
• /
• pp.177-182
• /
• 2016

중공업과 군사목적으로 사용되는 궤도차량은 고중량의 차체를 버티기 위해 차체에서 전달되는 하중으로 기동륜을 감싸고 있는 링크는 큰 힘을 받게 되는데, 이 발생된 힘은 궤도전체의 내구성 저하를 야기하게 된다. 본 논문에서는 3가지의 상용화된 궤도 패드의 형상들을 가진 모델들을 설계하고, 내구성 저하로 발생될 수 있는 궤도패드의 마모와 링크의 파손을 효과적으로 줄일 수 있는 모델을 고안하였다. 또한 본 연구 결과를 궤도차량 설계에 접목함으로써, 파손방지와 내구성향상을 위한 안전설계에 기여할 수 있으며, 패드 형상의 디자인적인 요소를 융합기술에 접목하여 그 미적인 감각을 나타낼 수 있다.

• 한국방재학회 논문집
• /
• 제6권2호
• /
• pp.37-44
• /
• 2006

기존의 SOC를 보다 효율적으로 활용할 수 있는가를 고민하는 것은 SOC의 증설을 위한 연구.개발.투자만큼이나 중요한 문제이다. 또한 총중량 51톤의 군용 중차량인 전차가 현행법상 국내 교량의 통행에 제한을 받고 있다는 현실적인 문제에서 출발하여, 국내 외의 여러 연구 결과를 바탕으로 축하중 10톤, 총중량 40톤의 현 도로법상 차량의 운행제한 조항을 궤도하중인 군용전차에 일괄 적용하기에는 무리가 있다. 미국 및 NATO에서 사용하고 있는 교량해석방법의 또 다른 표준인 표준급수분류제도 등을 이용하여 우리 실정에 맞게 검증하고, 우리의 단위체계나 교량해석방법과는 다른 산물로서의 데이터베이스로 손쉽게 활용할 수 있어야 하겠다.

• Journal of Biosystems Engineering
• /
• 제37권3호
• /
• pp.148-154
• /
• 2012

Purpose: In order to improve road-friendliness of heavy vehicles, a fuzzy hybrid control strategy consisting of a hybrid control strategy and a fuzzy logic control module is proposed. The performance of the proposed strategy should be effectively evaluated using a hardware-in-the-loop (HIL) simulation model of a semi-active suspension system based on the fuzzy hybrid control strategy prior to real vehicle implementations. Methods: A hardware-in-the-loop (HIL) simulation system was synthesized by utilizing a self-developed electronic control unit (ECU), a PCI-1711 multi-functional data acquisition board as well as the previously developed quarter-car simulation model. Road-friendliness of a semi-active suspension system controlled by the proposed control strategy was simulated via the HIL system using Dynamic Load Coefficient (DLC) and Dynamic Load Stress Factor (DLSF) criteria. Results: Compared to a passive suspension, a semi-active suspension system based on the fuzzy hybrid control strategy reduced the DLC and DLSF values. Conclusions: The proposed control strategy of semi-active suspension systems can be employed to improve road-friendliness of road vehicles.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.165-173
• /
• 2014

The method of emission inspection for Heavy-duty diesel vehicles has been engine speed type Lug-down 3mode. This method could bring damage to decrepit vehicles under high speed and high load condition and it could not apply the driving pattern on the road. For these reasons, this study has started to create new emission inspection which is appropriate for Korea's road infrastructure. KD 147 would be applied to light-duty diesel vehicles from july 2010 after model operations. Therefore, this study has investigated new emission inspection system for heavy-duty diesel vehicles, except for light-duty diesel vehicles. In consideration of domestic conditions to meet the new load test method in this study, the Lug-down3 mode vehicle speed method was developed for the first time in korea.

• 한국입자에어로졸학회지
• /
• 제8권2호
• /
• pp.47-54
• /
• 2012

Paved road dust emissions were investigated 14 times on 12 main roads in Seo-Cho Gu, Seoul, Korea by vehicle-based mobile sampling system(Road Dust Monitoring System) during September to December 2011. Also, fourteen heavy metals present in the dust samples were analyzed by ICP. ICP analysis showed that one of major source of the road dust would be urban construction. A large amount of silt was found, which might be originated mainly from building construction and open beds of trees. Trace element and pollution indices of heavy metals(Cd, Cu, Ni, Pb, Zn) on the roads adjacent to the commercial area had higher concentrations than those on the roads adjacent to the construction and residential areas because of traffic density and heavy traffic.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.58-64
• /
• 2008

An aluminum radius rod using rheo-forging method has been developed for heavy commercial vehicles to decrease vehicle unsprung weight. To design the shape of the rod, structural simulations are performed using two load cases. To evaluate durability performance of the rods, a test system which has simultaneous 3 axes actuating system is developed. And 3 axes durability test conditions are established based on vehicle field tests. Using the test systems and the conditions, the durability test is carried out and the rods have passed the test conditions of 700,000 cycles. The weight of a developed aluminum radius rod is 4.2kg and it was drastically reduced by 48.8 percent in comparison with the weight of a steel radius rod.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.63-74
• /
• 1996

Automatic transmission for heavy duty vehicles is a part of the power pack which includes steering and braking systems. This transmission in different from the one for passenger car. Therefore, in order to understand the trend of the important design parameters, maneuverability, acceleration performance and maximum speed, we need to analyze the total performance characteristics of the power transmission systems. In this study, modeling of the automatic transmission in heavy duty vehicle is carried out and the performance analysis method is presented. Results can be used for performance estimation data in the analysis for several combination method which determines the optimal parameters on the basis of penalty functions and weightings. And the estimation method of the important performance parameters such as engine inertia or power loss of engine by experiments is presented.