• 제목/요약/키워드: heavy metals leaching

검색결과 232건 처리시간 0.035초

낙동강 퇴적물 내 중금속 존재 형태 및 용출 가능성 (Speciation and Leaching Potential of Heavy Metals in Sediments of Nakdong River)

  • 황경엽;박성열;백원석;정제호;김영훈;신원식;이남주;황인성
    • 상하수도학회지
    • /
    • 제21권1호
    • /
    • pp.113-122
    • /
    • 2007
  • Experimental studies were performed to investigate speciation and leaching potential of heavy metals(Cu, Cd, Pb Zn, Ni) in ten sediment samples collected from Nakdong River. Acid Volatile Sulfide (AVS) and Simultaneously Extractable Metals (SEM) measurements were used to estimate heavy metals that can be leached under anaerobic conditions. Sequential Extraction Procedure (SEP) and Toxicity Characteristic Leaching Procedure (TCLP) were used to characterize speciation and leaching potential of heavy metals under aerobic conditions. The results show that total concentrations of Cu, Zn and Ni were relatively high in the sediments from points Seongseo industrial complex stream (upper stream) (D), Seongseo industrial complex stream (midstream) (E), Dalseo stream (F), and Nakdong river estuary (J), and that Cd concentrations were higher in all sampling points except for Goriung Bridge (G) and Soosan Bridge (H). SEM and AVS analyses reveal that samples from points Ilsun Bridge (A), Namgumi Bridge (C), and Soosan Bridge (H) have potential of heavy metals leaching, although leachable concentrations are relatively low. The leaching potential of heavy metals in other points was low because of higher concentrations of AVS than SEM. SEP results show that more than 50% of Cu, Zn and Ni were present in residual fraction, which means these metals are less amenable to leaching in anaerobic conditions. On the other hand, more than 50% of Pb and Cd were extracted during the first through third step of the SEP, which means substantial fraction of these metals can be leached upon changing of redox conditions. TCLP tests predict that leaching potential of heavy metals was generally low, which is consistent with the results obtained by AVS and SEM measurements.

도시쓰레기 소각로 비산재 용융결정화 및 용출특성 (Crystallization of the Fly Ash from Municipal Incinerator)

  • 이혜문;김우현;이정규
    • 연구논문집
    • /
    • 통권31호
    • /
    • pp.5-14
    • /
    • 2001
  • These days, interest in the leaching of hazardous heavy metals to consist of incinerator fly ash is increasing, because the heavy metals that leach from the incinerator fly ash pollute the soil and ground water. Therefore this study was undertaken to crystallize the fly ash and prevent the leaching of hazardous heavy metals from fly ash. The concentrations and the leaching concentration of hazardous heavy metals(Cd, Cr, Hg, Pb, Zn) in the law incinerator fly ash have been measured. The fly ash was melted with two kinds of flux($Na_2CO_3, CaCO_3$) and its add quantity(0, 1, 2, 3 wt%). The crystal structure of melting materials was analyzed by SEM(Scaning Electron Microscope) and X-RD(X-Ray Diffractometer). The leaching test of melting materials was undertaken. And the relation between crystallization of melting materials and flux and leaching concentration. These experiments indicate that the concentration and leaching concentration of heavy metals in incinerator fly ash was much higher than the regulatory standard for leachates in Korea and U.S.A and average concentration of heavy metals in soil. And the crystal structure was better.

  • PDF

매립지 환경조건을 고려한 소각재와 도금슬러지의 중금속 용출특성 (Leaching Characteristics of Heavy Metals of Bottom Ash and Plating Sludge with Environmental Conditions in Landfill)

  • 손희정;김은호;이용희
    • 환경위생공학
    • /
    • 제13권2호
    • /
    • pp.121-127
    • /
    • 1998
  • This study was to understand leaching characteristics with pH controlling agents and Temp. control, and investigate leaching characteristics with pH control from opening a leaching test to an end for reassessing leaching test of heavy metals with environmental conditions in landfill. Because leaching of heavy metals was increased in low pH, pH must control for leaching in existing leaching test. Generally, regulation time(6hr) of leaching was confirmed reasonablely, except for Cu in plating sludge. In pH controlling solution, there was nearly not difference between Acetic acid and HCl and if considering Cu, the former was appropriate. In a part of heavy metal, leaching rate was increased in high Temp., and normal Temp. in existing leaching test would be revaluated.

  • PDF

휴폐광산의 중금속제어를 위한 융합공정 개발 (Convergence Process for the Removal of Heavy Metals in the Abandoned Mine)

  • 도현승
    • 한국융합학회논문지
    • /
    • 제7권1호
    • /
    • pp.155-160
    • /
    • 2016
  • 청양지역 폐광산의 오염원인인 중금속의 제거를 침출과 이온교환법을 활용한 융합공정을 통해 실험하였으며 중금속에 오염된 토양시료는 통계처리를 하여 분석하였다. 오염토양은 일차로 부선처리법으로 분리하였으며, 사용시약이 증가할수록 선별지수는 증가하였다. 중금속을 제거하기 위한 침출과 이온분리법에 의해 선별도는 더 향상이 되었다. 침출속도는 황산용액이 증가할수록 증가되었으며, 침출용액은 이온교환법에 의해 상당부분 제거가 되었다. 침출과 이온교환법이 결합된 연속융합공정을 개발하여 중금속 제거 실험을 하였으며, 향후 개선을 통해 중금속의 제거효과가 향상될 것이며, 이를 통해 폐광산의 오염토양에 적용 가능함을 알 수 있었다.

슬러지를 이용하여 생산한 인공토양의 흡착 및 용출 특성 (Adsorption and Leaching Characteristics of the Artificial Soils Produced from Sludge)

  • 윤춘경;김선주;임융호;정일민
    • 한국농공학회지
    • /
    • 제40권4호
    • /
    • pp.77-84
    • /
    • 1998
  • Adsorption and leaching characteristics of the artificial soils produced from water and wastewater treatment sludges were examined. The batch adsorption test and TCLP leaching test were used, and constituents of interest were heavy metals and nutrients. As, Cr, Cu, Pb, and Cd were analyzed for metals, and nitrogen and phosphorus were analyzed for nutrients. All the artificial soils showed strong adsorption and low leaching for the heavy metals, which implies that the artificial soils may not be hazardous to the environment due to heavy metals and even they can be utilized effectively to remove metals in solution like mine and industrial wastewaters. This is quite promising result because in most case heavy metals are the most concern in the application of sludge product to the farmland. For the nutrients, generally, artificial soils showed high adsorption and low leaching except artificial soil from wastewater sludge produced by low temperature firing. The artificial soils produced from water treatment sludge were active in adsorbing nutrients and showed low leaching that they can be practically used to remove nutrients in advanced treatment process of the wastewater. The artificial soils produced from wastewater treatment sludge were less active in adsorbing nutrients and showed high teaching. However, they could be used usefully if applied properly to the plant growing because of their fertilizing effect. Based on the test results, overall, the artificial soils were thought to be not hazardous to the environment and they could be more useful if applied properly.

  • PDF

휴.폐광산지역에서 폐재내 중금속의 존재형태 및 용출특성에 관한 연구

  • 김정호;김휘중;양재의;신경용;전상호
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
    • /
    • pp.372-378
    • /
    • 2003
  • This study investigates the fractional composition and the leaching characteristics of heavy metals in polluted soils due to mining activities. The fractionated composition of heavy metals is classified into five fractions, adsorbed, carbonate, reducible, organic and residual fraction. The status of humic substances in mine wastes of most sites are polyhumic except tailing from Sangdong mine. According to the sequential extraction procedures (SEPs), leaching probabilities of Cd in coal wastes and tailing are relatively low due to high percentage of residual fraction. 46.4% of Ni in tailings from Sangdong mine is probably leached under oxidized environment, and 39.4% of Cu in these tailings is readily extracted under strongly oxidized environment by organic fraction. According to leaching condition of pH 3.0 and pH 5.6, the amount of heavy metals leached out of coal wastes and tailing increases to 1/2 hours. At pH 3.0 and pH 5.6, concentration of Ni in tailing increases up three times of the initial value. Heavy metals released from coal wastes and tailing were not influenced significantly by leaching time.

  • PDF

Leachability of lead, cadmium, and antimony in cement solidified waste in a silo-type radioactive waste disposal facility environment

  • Yulim Lee;Hyeongjin Byeon;Jaeyeong Park
    • Nuclear Engineering and Technology
    • /
    • 제55권8호
    • /
    • pp.2889-2896
    • /
    • 2023
  • The waste acceptance criteria for heavy metals in mixed waste should be developed by reflecting the leaching behaviors that could highly depend on the repository design and environment surrounding the waste. The current standards widely used to evaluate the leaching characteristics of heavy metals would not be appropriate for the silo-type repository since they are developed for landfills, which are more common than a silo-type repository. This research aimed to explore the leaching behaviors of cementitious waste with Pb, Cd, and Sb metallic and oxide powders in an environment simulating a silo-type radioactive waste repository. The Toxicity Characteristic Leaching Procedure (TCLP) and the ANS 16.1 standard were employed with standard and two modified solutions: concrete-saturated deionized and underground water. The compositions and elemental distribution of leachates and specimens were analyzed using an inductively coupled plasma optical emission spectrometer (ICP-OES) and energy-dispersive X-ray spectroscopy combined with scanning electron microscopy (SEM-EDS). Lead and antimony demonstrated high leaching levels in the modified leaching solutions, while cadmium exhibited minimal leaching behavior and remained mainly within the cement matrix. The results emphasize the significance of understanding heavy metals' leaching behavior in the repository's geochemical environment, which could accelerate or mitigate the reaction.

폐플라스틱/제강 Dust 성형제의 용출안전성에 대한 연구 (Elution Safety of Recycled Plastic/EAF Dust Composites by Using Leaching Test)

  • 강영구;송종혁
    • 한국안전학회지
    • /
    • 제18권4호
    • /
    • pp.85-91
    • /
    • 2003
  • In this study, We have investigated leaching characteristics of heavy metals for recycled plastic composites containing EAF(Electric Arc Furnace) dust & EAF slag. EAF dust & EAF slag used that is generated in the 3 steel-making compaines in domestic. The physical and chemical properties of EAF dust & slag was examined by measuring specific surface area. porosity, oil absorption test and chemical wetting analysis etc. Results of total analysis indicated that EAF dust, slag contained significant amount of hazardous metals such as Cu, Pb, Cd and Cr. But, In the leaching test of the recycled plastic composites containing EAF dust, slag by Korean Standard Leaching Procedure, composites shows much lower leaching concentration of heavy metals. It was concluded that the recycled plastic composites containing EAF dust, slag showed good physical and chemical characteristics. This means that the EAF dust, slag can be effectively used as a functional filler.

휴ㆍ폐광산지역에서 폐재내 중금속의 존재형태 및 용출특성에 관한 연구 (A Study on Fractions and Leaching Potential of Heavy Metals in Abandoned Mine Wastes)

  • 김휘중;양재의;이재영;전상호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제8권3호
    • /
    • pp.45-55
    • /
    • 2003
  • 연구의 목적은 광산활동에 의해 발생된 폐재에 의해 오염된 토양에 포함된 중금속의 존재형태와 용출특성에 대하여 비교 분석하는데 있다. 실험에 이용된 중금속 존재형태 분류는 다섯가지로 adsorbed, carbonate, reducible, organic과 residual 형태로 나누었다. 토양내 유기물의 함량 정도는 상동광산에서 발생된 광미가 석탄폐재보다 낮은 것으로 나타났다. 오염된 토양의 중금속 용출 실험에 의하면 석탄폐석과 광미내의 카드뮴의 경우 낮은 용출량을 보였으며, 대부분이 reduciblel fraction에서 용출된 것으로 관찰되었다 상동광산에서 발생된 광미에 포함된 니켈은 혐기성 상황이 되면 총량의 약 46.4%가 용출될 것으로 사료되며, 구리의 경우 약 39.4%가 용출될 것으로 판단된다. pH 3.0과 pH 5.6의 용출조건하에서 석탄 폐석과 광미의 용출랑의 점진적인 증가는 30분안에 이루어졌으며, 광미의 경우 니켈은 pH 3.0과 pH 5.6에서 용출 3시간까지 계속 증가되는 상태를 보였다.

소각 비산재의 적정처리를 위한 기초연구(II) - 용출인자의 영향 - (A Basic Study on the Effective Management for MSWI Fly Ash (II) - Effect of Leaching Parameter -)

  • 김진범;이우근;심영주
    • 대한환경공학회지
    • /
    • 제22권7호
    • /
    • pp.1357-1364
    • /
    • 2000
  • 본 연구는 소각 비산재의 물리 화학적 특성이 중금속의 용출 거동에 미치는 영향을 알아보고자 수행되었다. 영향인자로는 비산재의 pH, CEC, 입자크기, 연속추출방법에 의해 분류된 중금속의 존재형태 중에서 exchangeable fraction을 고려하였다. KSLT법에 의한 중금속의 용출율은 pH에 크게 의존적이고 원소에 따라 차이를 보였다. 카드뮴과 구리의 용출율은 pH가 증가함에 따라 감소한 반면, 납과 아연은 중성 또는 강알칼리성 조건에서 증가하는 것으로 나타났는데, 중금속의 용출 거동이 용해도에 의해 제한됨을 나타내 준다. CEC가 중금속의 용출율에 미치는 영향은 pH와 비슷한 것으로 나타났다. 비산재의 입자크기 중에서 $D_{10}$은 KSLT법에 의한 중금속의 용출량과 음의 상관성을 나타내었다. Exchangeable fraction의 경우는 비산재의 CEC 값이 40 meq/100g 미만인 시료는 선형관계에 있지만, 그 외의 CEC 값에서는 비선형관계를 보여주었다.

  • PDF