• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권6호
• /
• pp.75-80
• /
• 2005

남한강 상류지역의 금속광산인 거도, 만정, 조일광산은 1988년 석탄광산합리화 사업과 더불어 폐광되었으며, 휴$\cdot$폐광된 이후 다량의 광산 폐기물을 방치하여 주변환경을 오염시키고 있는 실정이다. 그러나 광미, 폐석 등의 이동에 의한 주변의 토양오염에 대한 정량적 평가가 없기 때문에 이들 광산폐기물에 의한 오염정도를 확인하기 어렵다. 따라서 폐광된 거도, 만정, 조일 광산의 광산 폐석에 의한 수질 오염 가능성 평가를 위해 각 광산에서 폐석 시료를 채취하였으며, HCl 처리 농도에 따라 지화학적 농축 계수(Index of geoaccumulation), 중금속 존재 형태와 이동성에 관하여 조사하였다. 카드뮴, 납, 아연, 구리, 니켈 그리고 크롬의 지화학적 농축 계수는 각각 6, $4\~6,\;0\~6,\;4\~5$, 2, 0을 나타냈다. 광산 폐석에서 카드미뮴, 납, 아연, 구리의 지화학적 농축계수 분석을 통하여 이러한 지역이 상당한 오염 가능성을 알 수 있었다. 광산 폐석에서 중금속의 존재 형태는 구리의 경우 유기물 형태, 납은 탄산염 형태, 니켈과 아연은 잔류상 형태로 나타났다.

• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.131-144
• /
• 2006

For the purpose of preparing the fundamental data on working environment of small scale manufacturing industries and preventing the occupational diseases of workers in these industries, authors surveyed the status of working environment to several chemical substances and physical agents by types of industry and types of process in the small scale manufacturing industries with less than five workers in Gimhae including 235 workplaces, 14 types of industry and 25 types of process from January 2002 to December 2004. This measurement method was work environment measurement method (established in Ministry of Labor, Korea), analytical methods (2nd Ed.) of Occupational Safety and Health Administration (OSHA) and manual of analytical methods (4th Ed.) of National Institute for Occupational Safety and Health (NIOSH) and collected data was analyzed by using SPSS 10.0 for windows, the results were as follows: 1. Noise generated in 14 types of industry and 22 types of process. an actual level of mean exposure (90.7 dB(A)) exceeded threshold limit values (TLVs) in manufacture of other transport equipment. An actual level of mean exposure (90.2dB) exceeded TLVs in the process of wire-drawing and 90.4dB in the process of wire-stranding. 2. Dusts of type I, II, III were generated in 9 types of industry and 8 types of process. Its mean concentration did not exceed TLVs. 3. Heavy metals (Pb, Mn, Cr, Ni) were generated in 7 types of industry and 7 types of process. Its mean concentration did not exceed TLVs. 4. 16 kinds of organic solvents were generated in 11 types of industry and 6 types of process. Its mean concentration did not exceed TLVs. As the above results, chemical substances and physical agents were generated in the several different types of industry and process of the manufacturing industry with less than five workers, and only mean level of noise was exceeded TLVs. In case of exceeding threshold limit values, improvement of work environment is actively needed, and work environment management should be performed continuously for prevention of an occupational diseases and work related diseases.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.29-36
• /
• 2010

Several mines including Namil, Solim and Jungbong which are located in the Gyeonggi and Kangwon province have been abandoned and closed since 1980 due to "The promotion policy of mining industry". An enormous amount of mining wastes was disposed without proper treatment, which caused soil pollution in tailing dam and ore-dressing plant areas. However, any quantitative assessment was not performed about soil and water pollution by transporting mining wastes such as acid mine drainage, mine tailing, and rocky waste. In this research, heavy metals in mining wastes were analyzed according to leaching method which used 0.1 N HCl and total solution method which used Aqua-regia to recognize the ecological effect of distance from hot spot. We sampled tailings, rocky wastes and soils around the abandoned mine. Chemical and physical parameters such as pH, electrical conductivity (EC), total organic carbon (TOC), soil texture and heavy metal concentration were analyzed. The range of soil's pH is between 4.3 and 6.4 in the tailing dam and oredressing plant area due to mining activity. Total concentrations of As, Cu, and Pb in soil near ore dressing plant area are 250.9, 249.3 and 117.2 mg/kg respectively, which are higher than any other ones near tailing dam area. Arsenic concentration in tailing dams is 31.0 mg/kg, which is also considered as heavily polluted condition comparing with the remediation required level(RRL) in "Soil environment conservation Act".

• 분석과학
• /
• 제35권5호
• /
• pp.205-211
• /
• 2022

Deuterium (D) is an isotope with one more neutron number than hydrogen (H). Heavy elements rarely change their chemical properties with little effect even if the number of neutrons increases, but low-mass elements change their vibration energy, diffusion rate, and reaction rate because the effect cannot be ignored, which is called an isotope effect. Recently, in the semiconductor and display industries, there is a trend to replace hydrogen gas (H₂) with deuterium gas (D₂) in order to improve process stability and product quality by using the isotope effect. In addition, as the demand for D₂ in industries increases, domestic gas producers are making efforts to produce and supply D₂ on their own. In the case of high purity D₂, most of them are produced by electrolysis of heavy water (D₂O), and among D₂, hydrogen deuteride (HD) molecules are present as isotope impurities. Therefore, in order to maximize the isotope effect of hydrogen in the electronic industry, HD, which is an isotope impurity of D₂ used in the process, should be small amount. To this end, purity analysis of D₂ for industrial processing is essential. In this study, HD quantitative analysis of D₂ for high purity D₂ purity analysis was established and hydrogen isotope RM (Reference material) was developed. Since hydrogen isotopes are difficult to analyze with general gas analysis instrument, they were analyzed using a high-precision mass spectrometer (Gas/MS, Finnigan MAT271). High purity HD gas was injected into Gas/MS, sensitivity was determined by a signal according to pressure, and HD concentrations in two bottles of D₂ were quantified using the corresponding sensitivity. The amount fraction of HD in each D₂ was (4518 ± 275) μmol/mol, (2282 ± 144) μmol/mol. D₂, which quantifies HD amount using the developed quantitative analysis method, will be manufactured with hydrogen isotope RM and distributed for quality management and maintenance of electronic industries and gas producers in the future.

• 환경영향평가
• /
• 제32권6호
• /
• pp.431-436
• /
• 2023

산업이 발전함에 따라 생태계로 유입되는 중금속의 양이 증가하고 있다. 중금속은 분해가 어려워 생태계 내에 장기간 잔류하고 독성을 유발한다. 이러한 중금속은 수처리 시 흡착, 여과, 화학적 침전 등 물리 화학적 방법으로 제거된다. 본 연구에서는 중금속 흡착 및 제거용 킬레이트 수지로 알긴산 비드를 선정하고 이에 따른 중금속 흡착효율을 평가하기 위하여 JEI (Jellyfish extract at immunity reaction)를 혼합하였다. JEI를 혼합한 비드는 알지네이트의 특성에 따라 납(79-99%)과 구리(64-70%)에서 높은 흡착효율을 보였으며 카드뮴(25-37%)과 아연(5-6%)에서 낮은 흡착효율을 나타내었다. 중금속 흡착은 JEI의 함량에 비례하여 증가하지 않았으나 50%와 100% JEI 비드가 유의미한 증가를 나타내었다. 반응 속도식을 적용한 결과 유사 1차 반응식보다 유사 2차 반응식에 더 적합한 것으로 나타났다. 결론적으로 비드의 생산 단가나 중금속 흡착제거 효율을 비교해보면 50% JEI 비드가 중금속 흡착제거에 적합한 것으로 사료된다.

• 자원ㆍ환경경제연구
• /
• 제12권1호
• /
• pp.91-120
• /
• 2003

This paper is intended to measure sectoral sustainabilities and inter-industry linkage effects of natural capital depletion of the Korean industries, and to analyze sources of their change over time using the familiar input-output model. The sustainability indicator that we are measuring in this paper is based on the so-called genuine saving concept proposed by the World Bank(1997). We accommodated the concept in the extended analytical framework of Proops et al.(1999) to analyze sectoral sustainabilities of the Korean industries. We decomposed sectoral sustainabilities so measured into their composing factors based on the decomposition method devised by Chung & Rhee (2001). According to our analysis, overall sustainability of the Korean industries has been declined since 1995. In heavy and chemical, transportation, and electricity sectors, their sustainabilities has been gotten worse. Among four major factors influencing the sustainability, change in GDP was the most important followed by changes in savings, industrial structures, and demand patterns.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.28-33
• /
• 2010

Stainless steel is useful material for various industrial facilities such as the nuclear and steam power plant and the heavy chemical industry due to its good corrosion resistance and mechanical properties. However, it has also a large problem that is sensitized in the welding process and its corrosion resistance and mechanical properties decreases by sensitization. Thus, corrosion and corrosion fatigue characteristics of artificially sensitized austenitic STS304 were investigated through the EPR test and corrosion fatigue test. Obtained results are as follows: 1) According to the sensitizing period increase, Cr deficiency layer is linearly expanded. 2) Degree of sensitization(Ia/Ir) proportionally increased with sensitizing period. However, after 4hrs, it showed constant value. 3) Cr-carbide($Cr_{23}C_6$) in the grain boundary increased as sensitizing period increases until six hours. 4) corrosion fatigue strength of sensitized STS304 were remarkably reduced compare to non-sensitized ones.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.61-67
• /
• 2007

Paper sludges collected from three different paper mills were physico-chemically analyzed in order to use them as raw materials for making bed soils and seedling pots. The sludge from a fine paper mill contained lots of inorganic pigment particles used for coating, as those from a newsprint mill and a tissue mill had not. It was clearly through XRD analysis confirmed that all sludges included calcium carbonate. The paper sludge from the tissue mill contained the greatest amount of particles, which would contribute to water absorption and nutrient storage. The sludge from the fine paper mill had the highest density due to many inorganic elements. While the ash content and the total nitrogen content were the highest in the sludge from the fine paper mill, the C/N ratio was the lowest in the fine paper mill sludge. All sludges seemed to have insufficient contents of potassium. The sludges from the newsprint mill and the tissue mill showed more silicon contents than that from the fine paper mill. It was concluded that the sludge from the fine paper mill would be able to be the most efficient raw materials for making bed soils and seedling pots and the other two sludges would be more efficient for intensive culture for crops such as rice and grain with additional supplement of nitrogen and other nutrients.

• Elastomers and Composites
• /
• 제44권2호
• /
• pp.122-133
• /
• 2009

고무는 천연 고무를 비롯하여 부타디엔 고무, 스티렌-부타디엔 고무, 니트릴-부타디엔 고무, EPDM, 염소화 고무 등 산업적 요구에 따라 발전하여 왔다. 광범위한 분야에서 고무가 사용됨에 따라 새로운 물성을 갖는 합성 고무나 개질 고무의 생산이 필요하게 되었다. 본 리뷰 논문에서는 이중 결합을 포함하는 고무의 화학적 개질을 통하여 고무의 구조를 변화시키거나, 관능기, 이종 고분자 등을 도입하는 몇 가지 방법들에 대하여 정리해 보고자 한다. 특히, 최근에 많은 응용이 시도되고 있는 리빙 라디칼 중합법에 의한 고무의 개질을 소개하고 이의 효과를 알아보고자 한다.

• 한국수산과학회지
• /
• 제50권2호
• /
• pp.120-129
• /
• 2017

This study assessed the safety of raw oysters Crassostrea gigas for consumption during processing in a processing plant. Bacterial contamination (e.g., viable cell counts, coliform groups, Escherichia. coli and pathogenic bacteria) and chemical contamination (e.g., heavy metals and shellfish toxins) were measured on raw oysters, a processing equipment, employees and work areas. No total mercury, lead, paralytic shellfish poison, diarrheic shellfish poison or norovirus was detected in any post-harvested oyster samples. However, the cadmium level ranged from 0.1-0.2 mg/kg. The viable cell count, E. coli and coliform group levels in post-harvested oysters ranged from 4.00-4.54 log CFU/g, ND-210 MPN/100 g and 110-410 MPN/100 g, respectively. The viable contaminating cell counts on employees, equipment and work areas were in the range of $0.90-3.46log\;CFU/100cm^2$. Airborne bacteria in the work areas ranged from 0.60 to 1.81 log CFU/plate/15 min. Thus, no significant health risks were detected in the processing plant.