• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.21-23
• /
• 2010

This study was conducted to draw various decisive elements of a reasonable heat curing method and to examine the importance in deciding a construction method when constructing cold weather concrete. As a result, the items proposed as important elements at the time of decision of a heat curing method included economy, workability, maintainability, insulation capability, reduced construction period and usability. As a result of importance by items under AHP technique, it was found the most important element was insulation capability, followed by reduced construction period and workability. As a result of comparison of a heat supplying and a heat insulation method by dual bubble sheet differed 2 times as much as a heat supplying method, especially the evaluation degree by insulation capability and reduced construction period was high.

• 한국건축시공학회지
• /
• 제13권1호
• /
• pp.38-47
• /
• 2013

When building with concrete in cold weather, an insulation method of heat curing must be determined, and a holistic curing plan that considers the characteristics of structures, the heat loss coefficient of a curing sheet, the joint condition of the curing materials and the quantity of heat produced by a heating apparatus is an essential prerequisite for protection against early frost damage. But on a number of national construction sites, there have been serious problems in cold weather concreting due to the unreliability of the information obtained from practical experience. In the construction field in Japan, there is a specification for heat curing prepared by Japanese Architectural Society, which provides an equation for calculating heat quantity. It is also necessary to adopt a detailed specification for a standard heat curing method that is applicable to all national construction sites. In this study, the effect of bubble sheets on the economic feasibility of cold weather concrete is investigated through a comparison with the blue sheets commonly prescribed in national construction sites. In conclusion, this study found that bubble sheets had the effect of reducing the cost of curing materials and the fuel cost consumed by a heating apparatus, compared to the use of blue sheets.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.85-90
• /
• 2012

In this study, temperature profile of the fly ash concrete were studied in accordance with the change of heating curing method combination for the slab concrete in order to develop efficient protection method of the concrete subjected to $-20^{\circ}C$. The slab concretes with the size of $1200mm{\times}600mm{\times}200mm$ were fabricated with W/B of 50% and exposed to $-20^{\circ}C$ for 7 days. Five different combinations of heat curing methods were applied to the slab concrete specimen; two combinations of heat supplying by electrical heater and surface heat insulation material such as polyethylene film and quadrupled layer bubble sheet based on heat enclosure installment; three combinations of heating coil embedment and surface heat insulation materials such as polyethylene film, sawdust and quadrupled layer bubble sheet based on heat enclosure installment. Test results showed that by applying both heating coil and bubble sheet and heat enclosure, the concrete exposed to $-20^{\circ}C$ can be effectively protected from early-age frost damage.

• 한국건축시공학회지
• /
• 제16권1호
• /
• pp.67-76
• /
• 2016

$-20^{\circ}C$이하의 극저온조건에서 타설되는 콘크리트는 초기동해 방지를 위해 적절한 급열을 포함한 보온양생이 이루어져야 하는데, 현재까지 국내에서 극저온조건의 효율적인 보온양생 방법이 제시된 경우가 드문 실정이다. 따라서 본 연구에서는 $-20^{\circ}C$의 극한조건에서 시공되는 콘크리트의 초기동해 방지를 위한 효율적인 보온양생방법을 제시하고자, 보온양생 재료의 조합 변화에 따른 콘크리트의 온도이력, 적산온도 및 코어강도 결과를 고찰하였다. 실험변수로서 보온양생방법 조합에 따라 기둥, 슬래브 및 벽체를 모사한 목업 시험체를 제작한 후, 단열, 가열 및 양자 병용방법을 적용하여 실험을 진행하였다. 연구결과에 따르면, 슬래브 부재의 경우 온도이력 및 적산온도 측정결과 4BS+열선조합, 벽체의 경우 가열양생+발열매트 그리고 기둥의 경우 EPS 단열재조합에서 3일 이내에 초기동해 방지에 요구되는 적산온도인 $45^{\circ}D{\cdot}D$를 상회하며 $0^{\circ}C$이하로 콘크리트 온도가 저하하지 않는 것으로 나타나 본 연구범위에서 최적의 조합으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.373-376
• /
• 2005

The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. Fly ash consists of a glass phase. As it is produced from high temperature, it is a chemically stable material. Fly ash mostly consists of $SiO_{2}$ and $Al_{2}O_{3}$, and it assumes the form of an oxide in the inside of fly ash. Because this reaction has not broken out by itself, it is need to supply it with additional $OH^{-}$ through alkali activators. We used alkali activators for supplying it with additional $OH^{-}$. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time.

• 콘크리트학회논문집
• /
• 제18권4호
• /
• pp.449-458
• /
• 2006

시멘트는 전 세계적으로 사회기반 시설구조물의 주 건설 재료로서 경제 발전의 원동력이 되어 왔다. 그러나 시멘트 산업은 에너지 다소비형이며 또한 $CO_2$를 배출로 인한 온난화 현상 및 환경문제가 심각하다. 따라서, 본 연구에서는 시멘트를 사용하지 않은 21세기형 chemically bonded concrete를 연구하기 위해, 국내 fly ash를 재활용하여, 화학적 반응에 의해 경화시켜 모르타르 공시체를 제조하고, 시멘트 대체 건설재료로써 강도 발현 특성 분석, X-ray 회절분석(XRD), SEM 촬영을 통해 알칼리 활성제의 종류, 재령, 양생온도와의 상호관계와 반응 생성물의 강도 발현 메커니즘을 구명하였다. 실험 결과 알카리 활성제로 NaOH와 물유리를 사용한 시험체가 강도가 가장 높았으며, 초기의 높은 양생 온도는 조기에 fly ash의 반응을 활성화시켜 높은 강도 발현에 유리한 것으로 나타났다. 또한 XRD와 SEM 분석을 통해 주요한 반응생성물은 $Na_6-(AlO_2)_6-(SiO_2)_{10}-12H_2O$ 형태의 zeolite이며 그 밖의 칼슘실리케이트와 유사한 수화생성물로 나타났다.