• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.62-62
• /
• 2009

석탄화력발전소의 CO2배출량 감소와 고효율, 대용량화로 인해 초초임계압(USC:Ultra Super Critical) 화력발전소의 건설이 증가하고 있다. USC 발전소는 효율향상을 위한 증기온도와 압력의 상승 때문에 보일러 고온고압부에 기존의 소재에 비해 고온강도와 내산화성의 재료물성이 향상된 신소재 적용이 불가피하다. 특히 사용된 신소재 중에서 보일러 본체를 구성하는 수냉벽관(Water wall), 과열기와, 재열기용 튜브 및 후육부인 헤더와 배관재로 기존의 2.25Cr-1Mo강을 개량한 2.25Cr-1.6W계 내열강이 적용되고 있다. 2.25Cr-1.6W강은 SMI와 MHI가 공동개발한 소재로 1995년 튜브제품이, 1999년에 단조, 파이프재, 플레이트제품이 ASME code case로 등재되었고, 2009년 ASME code case 2199-4로 개정되어 사용 중이다. 이 소재는 2.25Cr-1Mo강에 고온강도 개선을 위해 석출강화효과가 있는 V과 Nb을 첨가하였고, 탄화물의 열적안정성과 고용강화효과 증대를 위해 W을 첨가하였다. 그리고 제작성과 용접성 및 재료의 인성 향상을 위해 B첨가와 C함량을 낮추었다. 합금성분의 첨가와 조정에 의해 고온강도는 개선되었지만, 보일러 설치 및 보수를 위한 용접과정에서 용접금속과 CGHAZ(Coarse Grain HAZ)에서 용접균열이 발생하였다. 대부분의 용접균열은 용접결함이나 고온 혹은 저온균열이 아닌 2.25Cr-1.6W계강의 강도 개선을 위해 첨가한 V과 Nb이 용접후열처리 도중 입내에 MX형태의 미세석출로 입내를 강화시킴으로서 발생한 재열균열 민감성 증대에 기인된 것으로 판단된다. 이에 본 연구에서 용접 및 후열처리 과정에서 용접금속과 HAZ에서 발생하는 용접금속의 응력분포를 전산해석을 통해 확인하고 실제 후육파이프 용접부에서 잔류응력을 측정해 비교하였다. 용접부 응력분포는 SYSWELD 프로그램을 사용해 해석을 수행하였고, 발전소 실배관재의 용접부 응력측정은 수평부 측정이 용이하도록 지그를 부착한 Potable 잔류응력측정기를 사용해 Hole Drilling Method(HDM)를 적용하여 잔류응력을 측정하였다. 해석 결과 CGHAZ부위의 잔류응력이 용접금속과 기타 부위에 비해 높은 응력분포를 나타냈으며, 이는 CGHAZ와 용접용융선 부근에서 균열이 발생하는 실제값과 일치하는 결과를 보였다. 실제 배관재 용접부에서 측정한 잔류응력값은 항복응력의 약 50% 이하 응력값을 나타냈다. 배관 구조에 기인한 시스템응력의 영향을 제거하기 위해 배관재 용접부를 중심으로 양끝단을 절단 후 용접부에서 측정한 응력은 항복응력 대비 25%수준의 낮은값을 보였다. 그러나 배관재가 장기간 고온환경에 노출되었고 용접금속 내부의 균열이 발생한 상태에서 측정하였기 때문에 용접잔류응력은 상당부분 해소되어 상대적으로 낮은 응력값이 얻어진 것으로 판단된다.

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.329-336
• /
• 2000

정치망 어선에 사용하는 더블 캡스턴 드럼의 용접공정은, 순간적으로 집중투입되는 고온열원에 의해 상당 열응력과 열변형 거동이 시간의 경과에 따라 비정상적으로 발생한다. 유한요소법으로 이것들의 거동을 해석한 후 다음과 같은 결론을 얻었다. 1) 용접 초기에는 용접열원 위치에서 54∼48MPa의 상당 열응력을 나타내고, 캡스턴 드럼의 내부로 진행될수록 42∼18Mpa 정도의 열응력 분포를 보이며, 열응력 구배는 1mm당 3.6MPa의 기울기를 형성하고 있었다. 용접열원에서 0.004∼0.015mm정도의 미세한 변형량이 계산되었고 좌측 자유단으로 진행하면서 0.03∼0.033mm의 변형량은 용접초기에 열충격 현상으로 발생한 것으로 사료되므로 이에 대한 대비책이 있어야 한다. 2) 용접 중반부에서는 상당 열응력 크기는 용접 초기보다 다소 작아져서 최대 51MPa, 최소 11.3MPa을 보여주며 열응력 기울기도 다소 완화된다. 이것은 용접 열원이 이동하면서 발생하는 예열효과로 상당 열응력이 감소한 것으로 사료된다. 상당 열변형의 크기는 최대 0.04mm, 최소 0.0045mm 정도를 형성하고 있고, 용접열원의 진행으로 전체적인 변형 양상이 용접진행 방향과 동일하게 이동하고 있다. 3) 용접공정의 후반부는 상당 열변형량이 최소 0.005mm, 최대 0.045mm 정도이므로, 정밀한 용접가공을 위해 반대방향에 지그나 고정구를 설치해야 한다. 상당 열응력의 구배는 모재 내부로 진행된 양상을 보이고 있으나 열응력의 절대 크기는 최소 3MPa에서 최대 27MPa로 작아졌다. 이 것은 용접의 이동열원이 제거됨으로서 모재 내부의 열응력이 현저히 저하되었음을 의미하지만, 잔류 열응력이 존재하므로 뜨임처리와 같은 후처리가 요망된다.

• 한국약용작물학회지
• /
• 제22권5호
• /
• pp.339-348
• /
• 2014

The transcriptomes of four ginseng accessions such as Cheonryang (Korean ginseng cultivar), Yunpoong (Korean ginseng cultivar), G03080 (breeding line of Korean ginseng), and P. quinquefolius (American ginseng) was characterized. As a result of sequencing, total lengths of the reads in each sample were 156.42 Mb (Cheonryang cultivar), 161.95 Mb (Yunpoong cultivar), 165.07 Mb (G03080 breeding line), and 166.48 Mb (P. quinquefolius). Using a BLAST search against the Phytozome databases with an arbitrary expectation value of 1E-10, over 20,000 unigenes were functionally annotated and classified using DAVID software, and were found in response to external stress in the G03080 breeding line, as well as in the Cheonryang cultivar, which was associated with the ion binding term. Finally, unigenes related to transmembrane transporter activity were observed in Cheonryang and P. quinquefolius, which involves controlling osmotic pressure and turgor pressure within the cell. The expression patterns were analyzed to identify dehydrin family genes that were abundantly detected in the Cheonryang cultivar and the G03080 breeding line. In addition, the Yunpoong cultivar and P. quinquefolius accession had higher expression of heat shock proteins expressed in Ricinus communis. These results will be a valuable resource for understanding the structure and function of the ginseng transcriptomes.

• 대한한방내과학회지
• /
• 제15권2호
• /
• pp.318-346
• /
• 1994

A Bibliographical study was done about lumbago in oriental internal Medicine. The results are as follows. 1. Shenxu,sexual active, senile, Feng, Han, Shi, shiji, Tanyin and Qi lumbago are applicable to internal medical lumbago in oriental medicine, and Shenxu is essential pathogenesis. 2. Shenxu lumbago is characterized by continous pain, improved after chiropsia, deep pulse in Chi pulse, and used QingeWan, LiuweiDihuangWan and AnshenWan in herb-medicine. and Cortex Eucommiae, Radix Rehmanniae Praeparata and Fructus Psoraleae in drugs for the purpose of ZishenYijing, and related to lumbago caused by chronic prostatitis, calculus or tumor in kidney and diabetes mellitus. 3. Sexual active lumbago is dim-aching and weak pain in or after sexual life at low back and knee joint, and classified to Shenyang Buzu, ShenjingKuisun. GanshenYinxu and XinshenBujiao ; Liuwei Dihuang Wan, ZuoguiWan In herb-medicine. Cornu Cervi Pantotrichum, Fructus Lycii and Fructus Corni in drug were used for treatment. 4. Senile Lumbago is a kind of consumptive disease due to exhaused essential energy and caused by lack of Shenjing, Yangqi ; and described as repeated mild dim pain and ErzhiWan, QingeWan and MoyaoGao were used frequently, supposed to connected with osteoporosis, osteomalacia and osteoarthropathy deformons caused by aging. 5. Feng lumbago is attacked by Liuyin, and characterized by chilling and fever. stabbing pain from thoracic and lumbar vertebrae to pedes, and used WujiXan, XiaoxumingTang for treatment. Han lumbago is caused by cold's attacking Shenjing, distinguished for chilling,icing sense improved by heat on low back, and used WujiXan, JiangfuTang. Shi lumbago is caused by damp's inflowing Shenjing, described as stone-like lumbago which was subsided low back pain growing worse by gloomy rain, and used ShenshiTang. ShenzhuTang for the purpose of ZaoshiXingqi. And it is supposed that lumbago occured in the initial of urinary track infection was belong to those of Feng,Han and Sill's. 6. Sillji lumbago is caused by pathogen being in the spleen and the stomach, and used ChenxiangJiangqiTang, PingweiSan for treatment. And it is supposed that it belong to lumbago caused by gastrointerstinal disease such as peptic ulcer. gastroduodenal tumor and colonic inflammatory disease. 7. Tanyin lumbago is caused by Tanyin's flowing meridian, characterized by thoracolumbar verterber's heaviness, covered sense with something on low back and painless massage. Kuaiqi-drug are added to ErchenTang, DaotanTang for treatment, and it supposed that Tanyin lumbago's belong to that accompanied with metabolic disease such as obesity and gout. 8. Qi lumbago is caused by excessive stress such as melancholy and fury, described as multiple stabbing pain, an unexpected on and improvement, ranging back pain until flank and abdomine. Tiaoqi-drugs were added to RenshenShunqiSan, WuyaoShunqiSan for treatment, and it supposed to connecting with emotional lumbago such as hysteria, feigned illness and anxiety psychosis.

• 한국수정란이식학회지
• /
• 제6권2호
• /
• pp.1-17
• /
• 1991

It is widely recognized that the embryonic or fetal loss after breeding is common in the cattle and that it is an important factor affecting reproductive efficiency. The causes of this loss have been subject of extensive researches and the results indicate that the embryonic mortality may he primary factor responsible for low pregnancy rates in non-embryo transfer bovine populations as well as embryo transfer programs. However, it's causes are still not clearly understood. The embryonic mortality or pregnancy rate has been influenced by various embryonic and maternal effects related to genetic and environmental factors. The timing and extent of embryonic mortality vanes greatly according to authors and estimating methods, because it is difficult to make direct measurements. The major important factors that may influence the embryonic losses or pregnancy rates after embryo transfer can be summeirized. 1.When an embryo is transferred to unmated recipients, the contralateral transfer to corpus luteum results in a lower survival rate than ipsilateral deposition. When the embryos are transferred for the production of twin calves, their survivals and twin pregnancies have quite inconsistent according to the transfer methods either to the unmated-synchronized or already mated recipients and more works are needed to accurrately clarify the previous results. 2.Although embryos can be cultured in vitro some hours without the great declines in pregnancy rates, the rates differ markedly among culture times and media but may be improved by co-transfer systems. 3.Embryo developmental stages and quality grades clearly affect the survival rate following freezing and the pregnancy rate after transfer and the selection of embryos without chromosome abnormalities and of high fertile semen may also be considered to increase the pregnancy rates. 4.Many researches have attempted to relate the plasma progesterone levels to pregnancy rates and others have done either direct progesterone supplementation or luteal stimulation by hCG treatment in order to increase the pregnancy rates. However, these effects on pregnancy rates are inconsistent and also contradictory. 5.The asynchrony between donors or embryos and recipients may he a major cause of embryo death and low pregnancy rate and the sensitivity to uterine asynchyony differs in according to the quality and stages of embryos. 6.The extremes of poor or over nutrition during early pregnancy in the recipients are detrimental to the survival of embryos and the good body condition is required to prevent a reduejion of pregnancy rates. The uterine pathogens in embryonic mortality or fertility have been questioned but the infection of C.pyogenes and Campylobacter fetus is still important pathogens. 7.The heat stress during early pregnancy may reduce conceptus weight and possibly increase the embryonic mortality.

• 한국식품위생안전성학회지
• /
• 제13권2호
• /
• pp.171-187
• /
• 1998

Garlic occupies a special position among the many foods of vegetable origin because it is the sole food for Koreans during the their lives. And vitamin A has been ingested by forms of food or additives. Cadmium has been described as one of the most dangerous trace elements in the food and environment of man and livestocks. Since the de novo synthesis of stress proteins can be detected early after exposure to some agents, analysis of cadmium-induced changes in gene expression , ie. alterations in patterns of protein synthesis, may be useful to develop as biomarkers of exposure and damage for food hygiene. He acute and chronic combine effects of cadmium (Cd, CdCl2 20mg/kg), garlic oil(Dds: diallyl disulfide 50mg/kg, 3 times a week) and vitamin A(Ra: retinol acetate 50,000 IU/kg, 3 times a week) on Wistar male rats were evaluated concerning cadmium contents, tissues enzyme activity, HSP expression histopathological and electron microscopical examinations. The results of the study are as follows ; 1. Less cadmium was absorbed through the digestive tracts, but the ratio of contents in tissue were not changed by the simultaneous adminstration of diallyl disufide or retinol acetate. 2. ALT(alanine aminotransferase) , AST(aspartate aminotransferase), glucose, BUN (blood urea nitrogen), creatinine, the key indices of the clinical changes in hepatic and renal function were significantly hanged by the cadmium treatment after 1 week in liver, after 4 weeks in kidney. 3. Histopathological changes in cadmium treated rats were appeared at 8 weeks age treatment in kidneys. Homogenous eosinophilic material was accumulated in cortical and collecting tubular lumens at 16 weeks. Degenerated or necrotized tubular cells were observed in cortex and medulla. Degenerated seminiferous tubules and homogeneous eosinophilic material was seen in interstitial tissue of rat treated with cadmium for 16 weeks. Calcium deposits were seen in degenerated seminiferous tubules and the tubules showed severe calcification of rat treated with cadmium for 16 weeks. Electron microscope changes in kidney were observed in rats treated with CdCl2 20 mg/kg. Proximal convoluted tubule cells showed selling of cytoplasm and narrow lumen. Capillary endothelial cells showed cytoplasmic vacuoles and swelling. Degenerated epithelial cells were accumulated in tubular lumen of kidney. 4. Enhanced synthesis of 70 KDa relateve molecular mass proteins were detected in 2 hours after cadmium, exposure, with maximum activity occurring at 8~48 hours. Induction of HSP 70 was evident at proximal tubules and glomeruli in kidney. Testicular cells produced enough HSP to be detected normally. From the above results, it could be concluded that HSP70 induction by the cadmium treatment was a rapid reaction to indicated the exposure of xenobiotics, and retinol acetate reduced the cadmium induced nephrotoxicity.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• 생물환경조절학회지
• /
• 제29권3호
• /
• pp.306-312
• /
• 2020

본 연구에서는 여름철 고온기 시설재배시 수시차광이 내부환경과 오이 생리적 반응에 미치는 영향을 검토하였다. 온실차광이 오이의 고온 스트레스 완화 정도를 추정하기 위하여 잎 온도, 엽기온차, 최대 카르복실화속도, 최대 전자전달 속도, 열파괴, 광호흡과 같은 오이의 생리적 반응을 측정 분석하였다. 오이 시설하우스의 차광율은 90% 수시차광, 40% 수시차광, 무차광 3수준의 실험 조건으로 하였다. 90% 수시차광은 외부 일사량이 650 W·m^-2일 때 차광되도록 하였다. 기온, 일사량, 엽온, 엽기온차, 광호흡은 90%의 수시차광에서 40% 수시차광과 무차광 처리 보다 낮은 값을 나타내었다. 최대 카르복실화속도, 광호흡율은 90% 수시차광 온실이 다른 처리구보다 유의하게 낮은 것으로 나타났다. 고온저항성을 나타내는 thermal breakdown 값은 90%의 수시차광에서 다른 처리구 보다 유의하게 높은 것으로 나타났다. 따라서, 90% 수시차광이 여름철 오이 재배에 있어 고온스트레스를 덜받는 생육환경을 조성하였다는 결과를 얻었다.

• 반도체디스플레이기술학회지
• /
• 제6권3호
• /
• pp.19-23
• /
• 2007

The NiSi is very promising candidate for the metallization in 45 nm CMOS process such as FUSI(fully silicided) gate and source/drain contact because it exhibits non-size dependent resistance, low silicon consumption and mid-gap workfunction. Ni film was first deposited by using ALD (atomic layer deposition) technique with Bis-Ni precursor and $H_2$ reactant gas at $220^{\circ}C$ with deposition rate of $1.25\;{\AA}/cycle$. The as-deposited Ni film exhibited a sheet resistance of $5\;{\Omega}/{\square}$. RTP (repaid thermal process) was then performed by varying temperature from $400^{\circ}C$ to $900^{\circ}C$ in $N_2$ ambient for the formation of NiSi. The process temperature window for the formation of low-resistance NiSi was estimated from $600^{\circ}C$ to $800^{\circ}C$ and from $700^{\circ}C$ to $800^{\circ}C$ with and without Ti capping layer. The respective sheet resistance of the films was changed to $2.5\;{\Omega}/{\square}$ and $3\;{\Omega}/{\square}$ after silicidation. This is because Ti capping layer increases reaction between Ni and Si and suppresses the oxidation and impurity incorporation into Ni film during silicidation process. The NiSi films were treated by additional thermal stress in a resistively heated furnace for test of thermal stability, showing that the film heat-treated at $800^{\circ}C$ was more stable than that at $700^{\circ}C$ due to better crystallinity.

• 접착 및 계면
• /
• 제5권1호
• /
• pp.3-11
• /
• 2004

본 연구에서는 DSC와 DMA를 이용하여 잠재성 양이온 개시제인 BPH에 의해 개시된 DGEBA/PMR-15 블렌드계의 경화거동에 대해 연구하였다. 본 블렌드계의 열안정성과 기계적 계면 특성은 TGA 분석과 임계 응력 세기 인자($K_{IC}$) 측정을 통하여 고찰하였다. 본 실험 결과, DSC 측정을 통하여 Ozawa 방정식으로부터 구한 경화 활성화 에너지($E_a$)와 DMA 측정을 통하여 구한 relaxation 활성화 에너지($E_r$)는 PMR-15의 함량이 증가함에 따라 증가하는 것을 알 수 있었다. 적분 열분해 온도(IPDT)와 유리전이온도($T_g$)로 알아본 열안정성은 PMR-15의 우수한 내열성으로 인해 PMR-15의 함량이 증가함에 따라 크게 증가하였다. 기계적 계면 특성인 $K_{IC}$ 또한 경화 활성화 에너지와 같은 경향을 나타내는 것을 알 수 있었는데, 이는 블렌드계의 분자들간의 수소 결합 또는 계면 결합력이 증가되었기 때문인 것으로 사료된다.