• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.569-576
• /
• 2020

This study investigated the characteristics of microfibril angle(MFA) in order to see if there was any difference in pine tree lumber quality among the three mountain areas surrounding the Taebaek Mountains in Korea - Yeongdong (Goseong-gun), Yeongseo (Hongcheon-gun) and Yeongnam (Bonghwa-gun). Pine trees of each mountain area were divided into earlywood and latewood in relation to heartwood part (1959 ~ 1961, 3 annual rings) and sapwood part (2002 ~ 2004, 3annual rings), and measured at tangential section. The microfibril angle showed significant differences between mountain areas. In general, Goseong Mountain was found to have 37.35°, followed by Hongcheon Mountain 32.42° and Bonghwa Mountain 25.75°, in order. The sapwood part had larger angle than heartwood part; and earlywood, than latewood. Variation within a single annual ring tended to be smaller from earlywood toward latewood.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.243-247
• /
• 2007

An experiment was conducted to observe the safranine penetration depth in radial directions of Populus tomentiglandulosa. Radial penetration was considered from bark to pith. In radial direction, ray parenchyma and intercellular space were considered for the measurement of safranine penetration depth. It was found that sapwood conducted safranine 24.23% higher in radial direction compared with heartwood. Intercellular space conducted safranine 39.27% higher depth compared with ray parenchyma and the penetration depth was 39.41% higher in sapwood compared to heartwood. During safranine penetration, it formed a curvature in the lumen of ray parenchyma. Initially safranine penetration was found high and decreased gradually.

• 농업생명과학연구
• /
• 제45권1호
• /
• pp.9-14
• /
• 2011

Larix kaempferi is a tree with a major economic impact and is processed in large quantity every year in Korea. This study was carried out to collect basic data for the reasonable use of Larix kaempferi and to investigate the relation between anatomical properties and modulus of rupture (MOR) for heartwood and sapwood. As the length of earlywood tracheid and the radial wall thickness of earlywood tracheid and latewood tracheid increased, the modulus of rupture (MOR) increased, but decreased with increasing microfibril angle. Statistical analysis by the stepwise regression technique shows that the main factors affecting the modulus of rupture (MOR) of heartwood are the microfibril angle and the radial wall thickness of latewood tracheid, while those affecting MOR of sapwood are the length of earlywood tracheid and the microfibril angle.

• 한국가구학회지
• /
• 제19권2호
• /
• pp.151-155
• /
• 2008

An experiment was conducted to observe the 5% CCFZ solution penetration depth through ray parenchyma and ray tracheid of Larix kapempferi. Moisture content was adjusted 28% for both sapwood and heartwood. Even though the moisture content was same, heartwood was 1.3 times less permeable than sapwood and the difference was found statistically significant. Due to anatomical differences between ray parenchyma and ray tracheid, ray parenchyma was about 1.3 times more permeable than ray tracheid. Penetration speed was high initially and it decreased rapidly in course of time.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.44-51
• /
• 2008

본 연구에서는 국산 소나무재 심재부와 변재부 목분 탄화물의 물리 화학적 성질에 미치는 탄화 온도의 영향을 원소 분석, 질소-흡착 실험, SEM을 이용하여 분석하였다. 탄화물의 표면 구조 및 특성은 탄화 온도에 크게 의존하였으며 그 의존성은 변재부(swd)와 심재부(hwd)에 관계없이 정성적으로 거의 비슷하였다. 그러나, 심변재부간 경도, 성분 및 조직학적 차이 등의 영향 때문에 hwd를 탄화한 경우가 swd를 탄화한 경우보다 비표면적은 크고, 평균 pore 지름은 작았다. 예비 탄화 단계에서 대부분의 분해 반응이 일어나므로, 탄화물의 주성분은 탄소였다. 탄화 온도가 $700^{\circ}C$가 될 때까지는 미미하나마 탄화 반응이 지속적으로 일어났으며, 비표면적은 지속적으로 증가하였다. $800^{\circ}C$ 이상에서는 pore filling 및 narrowing 효과에 의하여 비표면적은 감소하였고, 특히 $900^{\circ}C$ 이상에서는 공극의 안쪽에 뿌리를 둔 육각 기둥 형태의 새로운 탄소 구조체가 형성되었다. 탄화물의 흡착 등온선은 type I, 흡착 등온선에서 보인 이력 루프는 type H4로 분류되었다.

• 한국산림과학회지
• /
• 제36권1호
• /
• pp.26-32
• /
• 1977

저질재(低質材) 건조(乾燥)의 한 방안(方案)으로 상수리나무 판재(板材)를 열판건조(熱板乾燥)하였다. 열판건조조건(熱板乾燥條件)을 변재(邊材)와 심재(心材)의 두께 1.5cm판재(板材)를 열판온도(熱板溫度) $175^{\circ}C$, 압력(壓力) 35psi로 건조(乾燥)항, 건조시(乾燥時) 내부온도(內部溫度), 건조중(乾燥中) 함수율(含水率) 및 건조속도(乾燥速度)의 변화(變化), 건조시간(乾燥時間)과 말기함수율(末期含水率), 건조재(乾燥材)의 치수변화(變化), 건조손상(乾燥損傷) 등(等)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 판재(板材)의 내부온도(內部溫度)는 건조초기(乾燥初期)에 급격히 상승(上昇)하여 얼마동안 일정(一定)하게 유지된 다음 서서히 상승(上昇)하였다. plateau temperature는 심재(心材)가 변재(邊材)보다 높고 유지기간도 길었다. 2. 건조시간(乾燥時間)에 따라 건조속도(乾燥速度)는 감소(減少)하였고 변재(邊材)의 건조속도(乾燥速度)는 logy=-2.7925-0.0811x, (r=-0.976), 심재(心材)의 건조속도(乾燥速度)는 logy=-3.3382-0.0468x (r=-0.976)의 곡선(曲線)을 나타났다. 3. 소요(所要)되는 건조시간(乾燥時間)은 심재(心材)가 변재(邊材)보다 길었고, 변재(邊材)는 초기함수율(初期含水率) 59%에서 말기함수율(末期含水率) 2.5%까지 건조(乾燥)하였는데 45분(分), 심재(心材)는 초기함수율(初期含水率) 64%에서 말기함수율(末期含水率) 3.3%까지 55분(分)이 각각(各各) 소요(所要)되었다. 4. 건조재(乾燥材)의 평균(平均) 두께수축율(收縮率)은 20.4%, 평균(平均) 폭수축율(幅收縮率)은 2.5%이고, 평균(平均) 두께복원율(復元率)은 11.4% 평균(平均) 폭복원율(幅復元率)은 49.4%로서 두께는 폭(幅)보다 수축율(收縮率)은 컸으나 복원율(復元率)은 적었다. 5. 변재(邊材)는 내부할열(內部割裂) 등(等)의 건조손상(乾燥損傷)이 거의 없었으나 심재(心材)는 내부할대(內部割袋)이 심하게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.22-31
• /
• 1996

Air permeabilities for both sapwood and heartwood of the three softwoods(Picea jezoensis, Larix gmelini, Pinus sylvestris), imported from the Russian Far East, in the three different structural directions were measured using steady-state rotameter method. After measuring permeability, the liquid absorption into the longitudinal permeability specimens was measured, and then related with the measured permeability. The longitudinal permeability was overwhelmingly greater than the transverse permeability, with the radial direction showing higher permeability than the tangential direction. There appear to be species differences in permeability of the three softwoods. The mean longitudinal sapwood permeability of P. jezoensis(3.300darcy) and P. sylvestris(3.028darcy) were considerably greater(ca. 25times) than that of L. gmelini(0.134darcy). Also the average longitudinal heartwood permeability of P. jezoensis(0.300darcy) was about 10 times as great as that of P. sylvestris(0.029darcy) and L. gmelini(0.024darcy). The average calculated radius of pit openings in the heartwood was $0.101{\mu}m$ for L. gmelini, $0.152{\mu}m$ for P. sylvestris for and $0.703{\mu}m$ for P. jezoensis. Heartwood permeability increases with the increase in radius of pit pore and the decrease in ring width and in extractive content, even though the correlation between permeability and its affecting factors was dependent on species. However, there was an inverse relationship between specific gravity and permeability, showing poor correlation between them. The correlation between air permeability and liquid retention was fairly high, so it was revealed that prediction of liquid absorption into the wood by using permeability was feasible.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.133-134
• /
• 1982

This experiment has been made to investigate the absorption of watersoluble zinc chloride by Pinus densiflora S. et Z. at different moisture content, under soaking process, to decide the optimum content condition for the maximum absorption of zinc chloride by the wood tested and to investigate the concentration of zinc chloride affecting each moisture content of wood. Material was cut in the Dept. of Forest, College of Agr. S.N.U. Suwon, Korea. Sample was divided into sap and heartwood group and cut $2{\times}2{\times}2\;cm$ in size, having exact three dimensions, using the part of D.B.H. The numbers of sample were 20 pieces for each moisture content condition for both sap and heartwood. Especially, the samples were protected from exposure to keep moisture content in green condition. The ranges of moisture content tested were as the table 3 and 4. The conclusions were as follows: 1. With 3% zinc chloride solution, the rate of absorption decreased with the time increased, if the air seasoned Korean red pine (Pinus densiflora S. et Z.) was treated in steeping process. Initial absorption for 30 minutes was more than 50% of total absorpon for 24 hours. 2. Rate of absorption was same under the green condition, while rate of absorption under the moisture content 7 to 30% varied. 3. Although it was not quite proportional change in the absorption with the difference of moisture content, the great change in the absorption occured by seasoning. With exception sap green condition, sapwood twice more permeable than the heartwood in the oven dried condition and it has been observed the nearly same amount of absorption at the moisture content of 7%, 10% and 15% respectively in heartwood. 4. It was better from water in wood from view-point of absorption of zinc chloride solution, but it was difficult practically to obtain the smallest moisture content, and then it was decided that values of allowable moisture content, on the basis of mean absorption, were 15% to 20% in the sapwood, and in the heartwood, 10% to 15%. The mean absorption for each moisture content in the sap and the heartwood were as following. 5. In general, the concentration of zinc chloride after steeping was nearly same between moisture content and sap and heartwood respectively.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.56-61
• /
• 2014

Macroscopic and microscopic characteristics of Yellow-hearted pine and Red pine were investigated. Wood color, annual ring width and latewood percentage were observed by the naked eye. Anatomical properties as the structure of three sections and cell dimensions were examined by an optical microscopy. As a result, the color of bark in Yellow-hearted pine was Reddish-grey, and Red pine showed brown or gray. The color of heartwood and sapwood in Yellow-hearted pine was deep-yellow to brown and creamy-white. And the color of heartwood and sapwood in Red pine was light-brown and light-yellow. The annual ring width of Yellow-hearted pine was narrower than that of Red pine, and the latewood percentage of Yellow-hearted pine was a little higher than that of Red pine. There was no significant difference in the anatomical characteristics between Yellow-hearted pine and Red pine.