• The Korean Journal of Pain
• /
• v.20 no.1
• /
• pp.66-70
• /
• 2007

No definitive etiology or risk factors have been identified that predispose individuals to developing complex regional pain syndrome (CRPS). We experienced two cases of CRPS developed after arterial and venous puncture which were done in regular medical work. A 35-years old female patient was suffered from pain and allodynia with swelling at right hand and wrist after radial artery puncture for monitoring of blood pressure during general anesthesia. A 24-years old male patient had pain and swelling with allodynia at the right fingers and arm after median cubital vein puncture for blood sampling. They did not have proper pain management as CRPS patients in the past weeks and months after their pain occurred. They were diagnosed as CRPS and started undergoing various interventional procedures, which led to improve their pain condition. Our cases suggest that CRPS could develop without any proved tissue damage in routine medical practice. In conclusion, health care workers should be educated in knowledge about the uncommon medical condition and proper consultation to pain specialist when it happens.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.2
• /
• pp.88-95
• /
• 2009

There are many assessment techniques used for occupational risk factors of MSDs in the workplaces. However, because all ergonomic assesment techniques or tools are based on theoretical background derived from workphysiology, biomechanics, psychophysics, industrial hygiene, work system, and etc, it is impossible to compare the assessment techniques. This study was conducted to compare the excess rates of risk factors among ergonomic assessment techniques and to make alternative methods. Site-visits to 6 automobile products and parts company provided data for process repeated work where the produced data was examined for evaluating the relationship between workplace lay-out and work posture by using ergonomic assessment techniques. We evaluated 157 jobs for simple repeated work and 37 jobs for manual materials handling (MMH). In simple repeated work, the exceeded rates of AC were 36.3% in OWAS method and 93.0% in RULA method. The exceeded rate for RULA method was significantly higher than those for OWAS method (p<0.05). In MMH, the exceeded rates of AC were 80.0% in NLE method and 76.5% in WAC method. Statistically significant differences were not identified in the exceeded rates for NLE and MAC methods (p<0.05). The analyzed results among ergonomic assessment techniques (OWAS, RULA, NLE/WAC) were applied to the same work places performing simple repeated work and manual materials handling simultaneously. The applied results showed statistically significant differences (p<0.05) among ergonomic assessment techniques (OWAS, RULA, NLE/WAC). Exceeded rates of four ergonomic assessment techniques in decreasing order was "RULA>NLE>WAC>OWAS". The RULA method was the strongest assessment technique for automobile products and parts company. We discovered that the results could easily be overestimated or underestimated when the ergonomic assessment techniques were not applied correctly during the evaluation process. Therefore, we recommend using at least 2 methods when evaluating and analysing the results.

• Parasites, Hosts and Diseases
• /
• v.51 no.1
• /
• pp.75-84
• /
• 2013

Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.577-584
• /
• 1997

Validation and Standardization of neurobehavioral instrument in Korean occupational setting has not been studied ever. This study tried to validate the newly developed computerized psychomotor tests, Neurobehavioral Tests for Occupational Screening (NTOS). Male patients with Parkinson's disease(n=12) and male workers who never exposed to occupational neurotoxic materials and didn't have neurologic disease(n=21), performed some tests from NTOS; simple reaction time, choice reaction time(2 choice), and finger tapping(both hands). In simple analysis, difference between patient group and worker group was significantly great. Adjusted for age and education years, simple reaction time and finger tapping(both hand) were statistically significantly different between two groups(p<.05). Choice reaction time was also different(p<.1) but error frequency of choice reaction time test was not. Generally, this results showed NTOS could detect impairment of psychomotor function. But insensitive results of choice reaction time was partly due to small sample size and confounding variables and so required future study and refinement at improvement of NTOS.

• Journal of Radiation Industry
• /
• v.11 no.1
• /
• pp.39-45
• /
• 2017

A cyclotron is a kind of particle accelerator that produces a beam of charged particles for the production of medical, industrial, and research radioisotopes. More than 30 cyclotrons are operated in Korea to produce $^{18}F$, an FDG synthesis at hospitals. A 30-MeV cyclotron was installed at ARTI (Advanced Radiation Technology Institute, KAERI) mainly for research regarding isotope production. In this study, we analyze and estimate the items of risk such as the problems in the main components of the cyclotron, the loss of radioactive materials, the leakage of coolant, and the malfunction of utilities, fires and earthquakes. To estimate the occurrence frequency in an accident risk assessment, five levels, i.e., Almost certain, Likely, Possible, Unlikely, and Rare, are applied. The accident consequence level is classified under four grades based on the annual permissible dose for radiation workers and the public in the nuclear safety law. The analysis of the accident effect is focused on the radioactive contamination caused by radioisotope leakage and radioactive material leakage of a ventilation filter due to a fire. To analyze the risks, Occupation Safety and Health Acts is applied. In addition, action plans against an accident were prepared after a deep discussion among relevant researchers. In this acts, we will search for hazard and introduce the risk assessment for the research 30-MeV cyclotron facilities of ARTI.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.336-342
• /
• 2019

Introduction: An unexpected death was reported in a beginner immediately after starting the work at a plating factory. After the incident, air sampling was performed using a simulation of the situation as it had been at the time. Methods: To evaluate the airborne concentration of hydrogen cyanide, a total of six samples were collected: one personal sample, three area samples, and two background samples (office and outdoors). Hydrogen cyanide measurement was performed according to the standard sampling protocol recommended by the U.S. NIOSH (National Institute of Occupational Safety and Health). Results: The highest concentration of hydrogen cyanide was 0.938 ppm measured in a sample collected from the plating bath area with local exhaust ventilation. This value was approximately 20% of the ceiling occupational exposure limit. The personal sample showed a concentration of 0.135 ppm. Samples collected near the bath in which the incident occurred and a dehydrator showed hydrogen cyanide concentrations of 0.236 ppm and 0.101 ppm, respectively. Hydrogen cyanide was not detected in the background samples (office and outdoors). Conclusions: It is necessary to use proper ventilation systems and respirators in plating factories to prevent acute poisoning. Furthermore, it is important to educate and train new workers dealing with toxic substances.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.3
• /
• pp.237-254
• /
• 2021

Objectives: This study aims to classify the latent profiles in the exposure to hazard factors of salaried employees and test the determinants. Methods: Latent profile analysis(LPA) was conducted using data from the fifth Korean Working Conditions Survey(KWCS). 30,050 of salaried employees were the subjects of this study. After classifying the employees, multinomial logistic regression was used to test the determinants. Results: Salaried employees were classified with three latent profiles based on the exposure to the hazard factors. Employees included in class 1(32.8%) tend to experience low level of physical hazard factors, moderate level of psychological hazard factors, and high level of office work hazard factors. Employees included in class 2(61.8%) tend to be exposed to the moderate to high level of physical hazard factors, moderate to low level of psychological hazard factors, and low level of office work hazard factors. Employees included in class 3(5.4%) tend to experience high level of psychological and physical hazard factors, and moderate level of office work hazard factors. After classification, the demographic, health-, and employment-related variables were tested. Conclusions: This study clarified the features of each class, and proved that employees in class 3 are quite hazardous in that they are exposed to physical and psychological hazard factors much more frequently than other employees. Thus, this study can be used in predicting the high-risk employees and taking preemptive measures for preventing industrial accidents.

• Journal of vocational education research
• /
• v.30 no.4
• /
• pp.89-111
• /
• 2011

The purpose of this study was to examine the elderly care facilities worker's attitude and awareness of associated factors of falls. The subject was 194 the elderly care facilities workers in Chungbuk. Descriptive statistics, t-test, ANOVA, Pearson correlation coefficient was utilized for the data analysis. The results of this study were as follows. the score of attitude was $2.98{\pm}.34$ out of 4, the score of awareness of associated factors was $3.00{\pm}.43$ out of 4. There were statistically significant differences of attitude and awareness of associated factors of falls according to general characteristics. the relationship of attitude and awareness of associated factors of falls was significantly positive. Falls is important health related problem in elderly care facilities, so effective fall prevention program is needed for elderly care facilities worker.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2019

Despite the efforts for enhancing the safety record, construction industry has been suffered from higher fatalities than other industries. The poor record of safety in construction industry means that there is a clear need for an effective countermeasure. As mentioned in previous studies, it is important to identify the type of activities or risks that are likely to cause accidents and to develop appropriate safety measures. Considering the large number of accident cases on the temporary installations including work platforms and work passages, the temporary installations should be managed first. To support it, this study aims to analyze falling accident cases on construction working platforms and passages which can lead to develop proper safety measures. Through the analysis of 1663 accident cases in the perspective of cost, progress, activity, and type of workers, this study identifies how the recent accidents occur and what is the cause of the accident occurrence. The identified causes of accident occurrence will help us to improve current construction safety.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.1-8
• /
• 2018

Whole body fatigue detection is an important phenomenon and the factors contributing to whole body fatigue can be controlled if a mathematical model is available for its assessment. This research study aims at developing a model that categorizes whole body exertion into fatigued and non-fatigued states based on physiological and perceived variables. For this purpose, logistic regression was used to categorize the fatigued and non-fatigued subject as dichotomous variable. Normalized mean power frequency of eight muscles from 25 subjects was taken as physiological variable along with the heart rate while Borg scale ratings were taken as perceived variables. The logit function was used to develop the logistic regression model. The coefficients of all the variables were found and significance level was checked. The detection accuracy of the model for fatigued and non-fatigues subjects was 83% and 95% respectively. It was observed that the mean power frequency of anterior deltoid and the Borg scale ratings of upper and lower extremities were significant in predicting the whole body fatigued when evaluated dichotomously (p < 0.05). The findings can help in better understanding of the importance of combined physiological and perceived exertion in designing the rest breaks for workers involved in squat lifting tasks in industrial as well as health sectors.