• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.118-121
• /
• 2002

Polyvinylidene di-fluoride (PVDF) film sensor appeared to be practically useful for the structural health monitoring of composite materials and structures. PVDF film sensors were either attached to or embedded in the graphite/epoxy composite (CFRP) samples to detect the fatigue damage at the bondline of single-lap joints or the tensile failure of unidirectional laminates. PVDF sensors were sensitive enough to detect and determine the crack front in linear location since composites usually produce very energetic acoustic emission (AE). PVDF sensors are extremely cost-effective, as flexible as other plastic films, in low profile as thin as a few tens of microns, and have relatively wide-band response, all of which characteristics are readily utilized for the structural health monitoring of composite structures. Signals due to fatigue damage showed a characteristics of mode II (shear) type failure whereas those from fiber breakage at DEN notches showed that of mode I (tensile) type fracture.

• Computers and Concrete
• /
• v.5 no.1
• /
• pp.37-60
• /
• 2008

Structural health monitoring of existing infrastructure is currently an important field of research, where elaborate experimental programs and advanced analytical methods are used in identifying the current state of health of critical and important structures. The paper outlines two methods of system identification of beam-like reinforced concrete structures representing bridges, through static measurements, in a distributed damage scenario. The first one is similar to the stiffness method, re-cast and the second one to flexibility method. A least square error (LSE) based solution method is used for the estimation of flexural rigidities and damages of simply supported, cantilever and propped cantilever beam from the measured deformation values. The performance of both methods in the presence of measurement errors is demonstrated. An experiment on an un-symmetrically damaged simply supported reinforced concrete beam is used to validate the developed method. A method for damage prognosis is demonstrated using a generalized, indeterminate, propped cantilever beam.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.669-674
• /
• 2007

To develop a promising hybrid structural health monitoring (SHM) system, a combined use of structural vibration and electro-mechanical (EM) impedance is proposed. The hybrid SHM system is designed to use vibration characteristics as global index and EM impedance as local index. The proposed health monitoring scheme is implemented into prestressed concrete (PSC) girder bridges for which a series of damage scenarios are designed to simulate various prestress-loss situations at which the target bridges car experience during their service life. The measured experimental results, modal parameters and electro-magnetic impedance signatures, are carefully analyzed to recognize the occurrence of damage and furthermore to indicate its location.

• Biomedical Science Letters
• /
• v.7 no.4
• /
• pp.181-190
• /
• 2001

This study was designed to investigate the effects of reactive oxygen species (ROS) on DNA stability in human spermatozoa. To verify human spermatozoa were incubated with xanthine-xanthine oxidase (X 100$\mu$M-XO 50 mlU ~ 400 mIU), $H_2O_2$ (125 $\mu$M ~ 1 mM), sodium nitroprusside (SNP 0.1 $\mu$M ~ 100 $\mu$M) or lymphocyte. Otherwise, spermatozoa were incubated under low $O_2$ (5%) condition. Damage of sperm DNA was analyzed by single cell electrophoresis (Comet assay) and flow cytometry after acridine orange staining. In the presence of ROS, there was increase in DNA damage. The rate of DNA single strand breakage (9.0$\pm$1.0% ~ 46.0$\pm$4.6%) and DNA fragmentation (7.51$\pm$1.0% ~ 29.5$\pm$4.6%) were similar regardless of the kinds of ROS and exposure time. DNA damage in the lower $O_2$ condition (5%) was lower than ambient $O_2$ condition (20%). Taken together, it suggested that sperm DNA might be damaged by ROS. In the presence of ROS, increase in DNA damage and chromatin instability was obvious in spite of short exposure. Although present study reconfirmed that sperm incubation in the low concentration of ROS have the benefit m the induction of capacitation and Ah, the increase in DNA damage by ROS and possible genetic problem should be considered before the human trials.

• Smart Structures and Systems
• /
• v.10 no.4_5
• /
• pp.443-458
• /
• 2012

The structural health monitoring (SHM) benchmark study on optimal sensor placement problem for the instrumented Canton Tower has been launched. It follows the success of the modal identification and model updating for the Canton Tower in the previous benchmark study, and focuses on the optimal placement of vibration sensors (accelerometers) in the interest of bettering the SHM system. In this paper, the sensor placement problem for the Canton Tower and the benchmark model for this study are first detailed. Then an information entropy based sensor placement method with the purpose of damage detection is proposed and applied to the benchmark problem. The procedure that will be implemented for structural damage detection using the data obtained from the optimal sensor placement strategy is introduced and the information on structural damage is specified. The information entropy based method is applied to measure the uncertainties throughout the damage detection process with the use of the obtained data. Accordingly, a multi-objective optimal problem in terms of sensor placement is formulated. The optimal solution is determined as the one that provides equally most informative data for all objectives, and thus the data obtained is most informative for structural damage detection. To validate the effectiveness of the optimally determined sensor placement, damage detection is performed on different damage scenarios of the benchmark model using the noise-free and noise-corrupted measured information, respectively. The results show that in comparison with the existing in-service sensor deployment on the structure, the optimally determined one is capable of further enhancing the capability of damage detection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.61-73
• /
• 2009

In this paper, hybrid health monitoring techniques using acceleration-impedance features are newly proposed to detect two damage-type in steel plate-girder bridges, which are girder's stiffness-loss and support perturbation. The hybrid techniques mainly consists of three sequential phases: 1) to alarm the occurrence of damage in global manner, 2) to classify the alarmed damage into subsystems of the structure, and 3) to estimate the classified damage in detail using methods suitable for the subsystems. In the first phase, the global occurrence of damage is alarmed by monitoring changes in acceleration features. In the second phase, the alarmed damage is classified into subsystems by recognizing patterns of impedance features. In the final phase, the location and the extent of damage are estimated by using modal strain energy-based damage index method and root mean square deviation (RMSD) method. The feasibility of the proposed hybrid technique is evaluated on a laboratory-scaled steel plate-girder bridge model for which hybrid acceleration-impedance signatures were measured for several damage scenarios. Also, the effect of temperature on the accuracy of the impedance-based damage monitoring results are experimentally examined from combined scenarios of support damage cases and temperature changes.

• Culinary science and hospitality research
• /
• v.12 no.2 s.29
• /
• pp.151-167
• /
• 2006

This study shows the differences among residents’ consciousness for general infectious disease and sterilization mediated by vermin. We categorized both industry-related people who work in restaurants, hygiene service shops, whole sales, government organizations, PC shops, factories, department stores and non-industry-related people who work in schools, general offices into two groups for this study. The discovery of vermin held 86% of total exam cases. The vermin included mosquitoes, cockroaches, ants, flies, and so on. People thought these vermin might mediate bacteria infection to human. 80.3% of persons thought mite might exist in blankets, beds and couches. Among 66.6% of total experience of vermin damage, the main damage came from mosquitoes. Frequently used methods of prevention from vermin damage were as follows: "spray of effective chemicals", "install traps" and " report to a prevention company" in order. It indicated that people did not take special actions to repel vermin in spite of their knowing seriousness of damage. Furthermore, just half cases were executed regular sanitization.

• Structural Engineering and Mechanics
• /
• v.15 no.3
• /
• pp.285-297
• /
• 2003

Complementing recent advances made in the field of structural health monitoring and damage detection, the concept of a wireless sensing network with distributed computational power is proposed. The fundamental building block of the proposed sensing network is a wireless sensing unit capable of acquiring measurement data, interrogating the data and transmitting the data in real time. The computational core of a prototype wireless sensing unit can potentially be utilized for execution of embedded engineering analyses such as damage detection and system identification. To illustrate the computational capabilities of the proposed wireless sensing unit, the fast Fourier transform and auto-regressive time-series modeling are locally executed by the unit. Fast Fourier transforms and auto-regressive models are two important techniques that have been previously used for the identification of damage in structural systems. Their embedment illustrates the computational capabilities of the prototype wireless sensing unit and suggests strong potential for unit installation in automated structural health monitoring systems.

• Structural Monitoring and Maintenance
• /
• v.3 no.1
• /
• pp.51-69
• /
• 2016

Monitoring the performance and estimating the remaining useful life of aging civil infrastructure in the United States has been identified as a major objective in the civil engineering community. Structural health monitoring has emerged as a central tool to fulfill this objective. This paper presents a review of the major structural monitoring programs that have been recently implemented in the United States, focusing on the integrity and performance assessment of large-scale structural systems. Applications where response data from a monitoring program have been used to detect and correct structural deficiencies are highlighted. These applications include (but are not limited to): i) Post-earthquake damage assessment of buildings and bridges; ii) Monitoring of cables vibration in cable-stayed bridges; iii) Evaluation of the effectiveness of technologies for retrofit and seismic protection, such as base isolation systems; and iv) Structural damage assessment of bridges after impact loads resulting from ship collisions. These and many other applications show that a structural health monitoring program is a powerful tool for structural damage and condition assessment, that can be used as part of a comprehensive decision-making process about possible actions that can be undertaken in a large-scale civil infrastructure system after potentially damaging events.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.412-419
• /
• 2009

How to efficiently and accurately detect the damages generated in a structure has become an important issue for structural health monitoring (SHM). Most existing SHM techniques require the baseline data which should be measured before a structure get damaged. Thus, this paper presents a new pitch-catch method-based SHM technique which will not require the baseline data any more. In the proposed SHM technique, the imaging method is also utilized to visualize damage locations. The proposed SHM technique is then validated through the damage detection texts for damaged aluminum plates.