• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.627-633
• /
• 2015

Accurate heading information is crucial for the navigation of intelligent vehicles. In outdoor environments, GPS is usually used for the navigation of vehicles. However, in GPS-denied environments such as dense building areas, tunnels, underground areas and indoor environments, non-GPS solutions are required. Yaw-rates from a single gyro sensor could be one of the solutions. In dealing with gyro sensors, the drift problem should be resolved. HDR (Heuristic Drift Reduction) can reduce the average heading error in straight line movement. However, it shows rather large errors in some moving environments, especially along curved lines. This paper presents a method called VDR (Vision-based Drift Reduction), a system which uses a low-cost vision sensor as compensation for HDR errors.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.774-780
• /
• 2017

The techniques for driving trajectory calculation and driving trajectory distribution calculation are proposed to analyze the durability of ground vehicles effectively. To achieve this aim, the driving trajectory of a vehicle and the driving trajectory distribution of that are needed, in addition to road profile. The road profiles can be measured by a profilometer but a driving trajectory of a vehicle cannot be acquired effectively due to a large position error from a conventional GPS sensor. Therefore two techniques are proposed to reduce the position error of a vehicle and achieve the distribution of driving trajectory of that. The driving trajectory calculation technique produces relative positions by using the velocity, time and heading of a vehicle. The driving trajectory distribution calculation technique produces distributions of the driving trajectory by using axis transformation, estimating reference line, dividing sectors and plotting a histogram of the sectors. As a results of this study, we can achieve the considerably accurate driving trajectory and driving trajectory distribution of a vehicle.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.2
• /
• pp.72-79
• /
• 2001

In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors of the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GP receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search space is drastically reduced to about 3/20 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.2
• /
• pp.166-171
• /
• 1995

Recently, various navigational instruments are being composed into a total navigational system. This system requires accurate ship's heading in digital form. The authors have been studying about an electromagnetic compass with a three - axis magnetic sensor in order to provide an accurate ship's magnetic heading which the compass deviations can automatically compensated in the compass itself. In this pater describe on the theory how to derive the poisson's coefficients from ship's magnetism measured with three axis magnetic sensor and the results obtained by the simulation using deviascope, and that results practically coincident with the value observed by bearing on a distant object with magnetic compass.

• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.85-90
• /
• 2010

This study was carried out to develop turning radius measuring method and device of using a DGPS speed sensor for agricultural tractors. The measurement system consisted of a DGPS speed sensor, a data acquisition device, a touch panel, a photo sensor, a radio modem and a notebook computer. Three methods were developed: average of turning speed-time method, integral of turning speed-time method, and speed-heading angular velocity method. Best method was average of turning speed-time method which could be used with a maximum error 2.7 cm.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.192-197
• /
• 2011

This paper describes the mathematical modeling, control algorithm, system design, hardware implementation and experimental test of a Manta-type Unmanned Underwater Vehicle (MUUV). The vehicle has one thruster for longitudinal propulsion, one rudder for heading angle control and two elevators for depth control. It is equipped with a pressure sensor for measuring water depth and Doppler Velocity Log for measuring position and angle. The vehicle is controlled by an on-board PC, which runs with the Windows XP operating system. The dynamic model of 6DOF is derived including the hydrodynamic forces and moments acting on the vehicle, while the hydrodynamic coefficients related to the forces and moments are obtained from experiments or estimated numerically. We also utilized the values obtained from PMM (Planar Motion Mechanism) tests found in the previous publications for numerical simulations. Various controllers such as PID, Sliding mode, Fuzzy and $H{\infty}$ are designed for depth and heading angle control in order to compare the performance of each controller based on simulation. In addition, experimental tests are carried out in a towing tank for depth keeping and heading angle tracking.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.35-43
• /
• 2004

Multibeam Echosounder system is the latest technology of a hydrographic survey utilized in producing an electronic nautical chart, obtaining a DEM with high precision, making a moving image by Swath surveying a wide area. As a fundamental study for improving the precision of MBES, we compared and analyzed measurements of DGPS and Motion sensor, and studied for the dynamic characteristics of vessel's movements. DGPS was installed in front and in the rear and on both side or the vessel and surveyed. The receiving precision of surveyed GPS results was obtained to the satisfactory extent that was possible to valuate the accuracy of Motion sensor as 0.0016$^{\circ}$ of the roll value and 0.0009$^{\circ}$ of the pitch value. The relationship between the values of heading, pitch, and roll in Motion sensor and the data of DGPS was proportional correlation. In addition, it is considered that deviations by elements like rapid turning and vibration of the vessel will be occurred, although the correlation of each deviation according to each amount or change is proportional. It is suitable that GPS installs in the central line of the vessel that is less affected than other places by waving because the amount of change in the tide level obtained from GPS survey and the value of heave are similar with the values taken by Motion sensor, and the velocity of GPS is different from installed places. The accuracy of the final result from MBES could be affected by the values of gyro and Motion sensor inputted to MBES processor because there were intervals of 15s and 13s of receiving time in gyro and Motion sensor respectively compared with the real-time measurements of DGPS.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.329-335
• /
• 2013

This paper is to develop the position error equations including the attitude errors, the errors of nadir and ship's heading, and the errors of ship's position in the free-gyro positioning and directional system. In doing so, the determination of ship's position by two free gyro vectors was discussed and the algorithmic design of the free-gyro positioning and directional system was introduced briefly. Next, the errors of transformation matrices of the gyro and body frames, i.e. attitude errors, were examined and the attitude equations were also derived. The perturbations of the errors of the nadir angle including ship's heading were investigated in each stage from the sensor of rate of motion of the spin axis to the nadir angle obtained. Finally, the perturbation error equations of ship's position used the nadir angles were derived in the form of a linear error model and the concept of FDOP was also suggested by using covariance of position error.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.48-56
• /
• 2015

In the paper, a smartphone-controlled personal mobility system(PMS) based on a compass sensor is developed. The use of a magnetic compass sensor makes the PMS move according to the heading direction of a smartphone controlled by a rider. The proposed smartphone-controlled PMS allows more intuitive interface than PMS controlled by pushing a button. As well, the magnetic compass sensor makes a role in compensating for the mechanical characteristics of motors mounted on the PMS. For adequate control of the robot, two methods: absolute and relative direction methods based on the magnetic compass sensor and wireless communication are presented. Experimental results show that the PMS is conveniently and effectively controlled by the proposed two methods.

• Journal of Sensor Science and Technology
• /
• v.27 no.2
• /
• pp.86-92
• /
• 2018

In recent times, motion capture technology using inertial measurement unit (IMU) sensors has been actively used in sports. In this study, we developed a canoe paddle, installed with an IMU and a water level sensor, as a system tool for training and calibration purposes in water sports. The hardware was fabricated to control an attitude heading reference system (AHRS) module, a water level sensor, a communication module, and a wireless charging circuit. We also developed an application program for the mobile device that processes paddling motion data from the paddling operation and also visualizes it. An AHRS module with acceleration, gyro, and geomagnetic sensors each having three axes, and a resistive water level sensor that senses the immersion depth in the water of the paddle represented the paddle motion. The motion data transmitted from the paddle device is internally decoded and classified by the application program in the mobile device to perform visualization and to operate functions of the mobile training/correction system. To conclude, we tried to provide mobile knowledge service through paddle sport data using this technique. The developed system works reasonably well to be used as a basic training and posture correction tool for paddle sports; the transmission delay time of the sensor system is measured within 90 ms, and it shows that there is no complication in its practical usage.