• Title/Summary/Keyword: head weight

Search Result 824, Processing Time 0.022 seconds

Intra-Rater and Inter-Rater Reliability of Various Forward Head Posture Measurements

  • Yoo, Won-Gyu;Kim, Min-Hee;Yi, Chung-Hwi
    • Physical Therapy Korea
    • /
    • v.12 no.4
    • /
    • pp.41-47
    • /
    • 2005
  • The purpose of this study was to determine the intra-rater and inter-rater reliability of various forward head posture measurements. Ten healthy adults (age, $20.4{\pm}2.2$ yrs; height, $164.0{\pm}5.5$ cm; weight, $58.7{\pm}7.3$ kg) participated in the study. They were free of injury and neurologic deficits in the upper extremities and neck at the time of testing. The subjects were asked to perform head forward posture by under the guidance of physical therapists. Markers were placed on the C7 spinous process, mastoid process, tragus of the ear, outer canthus, and forehead. Measurement 1 for forward head posture assessment was measured as the angle between the horizontal line through C7 and the line connecting the C7 spinous process with the tragus of the ear. Measurement 2 was measured as the angle between the C7 spinous process, the mastoid process and the outer canthus. Measurement 3 was measured as two kinds of angles the HT (head tilt) angle is between the line from the midpoint of forehead to the tragus line and Y-axis at the tragus point. The NF (neck flexion) angle is between the line from the tragus to the C7 line and the Y-axis at the C7. Intra-rater, inter-rater reliability and coefficient of variation was assessed by comparing the measured values from three kinds of measurements of forward head posture. The intra-rater reliability was indicated by intraclass correlation coefficients [ICC(1,1)] and inter-rater reliability was shown by intraclass correlation coefficients [ICC(3,k)]. The results of study were as follows: ICC(1,1) values for intra-rater reliability of three measurements were in the 'excellent' category. ICC(3,k) values for inter-rater reliability of three measurements were also in the 'excellent' category. The coefficient of variation of method 2 had a lower value than method 1 and method 3. This data means that the measured value of method 2 was less scattered. Further research is needed to determine whether the validity of all measurements is revealed in the 'excellent' category.

  • PDF

Single and 28-day repeated dose toxicity studies of botulinum toxin type A in mice and rats (마우스 및 랫드에서 botulinum toxin type A의 단회 및 28일 반복투여 독성시험)

  • Jeon, Tae-Won;Kim, Ji-Young;Hyun, Sun-Hee;Kim, Nam-Hee;Lee, Sang-Kyu;Kim, Chun-Hwa;Woo, Hee-Dong;Yang, Gi-Hyeok;Jung, Hyun-Ho;Jeong, Tae-Cheon
    • Korean Journal of Veterinary Research
    • /
    • v.43 no.1
    • /
    • pp.57-66
    • /
    • 2003
  • Single and 28-day repeated dose toxicity studies of botulimnn toxin type A were carried out in ICR mice and Sprague-Dawley rats, respectively. In the single dose toxicity study, botulinwn toxin was injected intraperitoneally to male and female mice at a single dose of 40, 59, 89 133 and 200 ng/10 ml saline/kg. All animals died from 59 ng/kg group. Some clinical signs, such as decrease in locomotor activity, dyspnea, prone position and ptosis, were observed in most of both sexes from 59 ng/kg group, but no signs were seen in all animals at 40 ng/kg group. The results showed that the median lethal dose of botulinum toxin might be in the range of 40-59 ng/kg in both sexes. In the repeated dose toxicity study, the test material was administered intradermally for 28 days at doses of 0 (vehicle-treated control), 1.25, 2.5, 5.0 and $10.0ng/head/50{\mu}{\ell}$ saline in male and female rats. No test material-related changes were noted in survivals, clinical signs, food and water consumptions and gross finding in any group. Botulinum toxin treatment significantly decreased the body weight gain rate in male of 5.0 ng/head group and over and in female of 10.0 ng/head group compared to vehicle-treated control. One or more relative organ weights (i.e., spleen, thymus, liver and kidney) were increased significantly from 5.0 ng/head group compared to vehicle-treated control in both sexes. Serum biochemistry revealed increases in aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatine phosphokinase, total protein and albumin in male, and increases in AST and ALT and decreases in $K^+$ and $Cl^-$ in female without dose-pendent manners. In the histopathological study, physical stimulation by needle caused slight inflammations of dennis. In addition, botulinum toxin treatment induced denervation of nerve cell and disuse of muscle, resulting in atrophy of skeletal muscle in both sexes from 2.5 ng/head group. When the antibodies to toxin were determined in all animals, a significant increase in serum antibodies was observed from 5.0 ng/head group. The results showed that the NOAEL of botulinum toxin might be 1.25 ng/head for 28-day repeated dose toxicity in rats.

Milling Condition and Harvesting Time for Improving Milling Recovery of Head Foxtail Millet Grain (완전미도정수율 향상을 위한 조(Setaria italica Beauvois) 도정방법 및 수확시기)

  • Lee, Jae-Saeng;Ko, Jee-Yeon;Song, Seuk-Bo;Woo, Koan-Sik;Kim, Jung-In;Kim, Hyun-Young;Jung, Tae-Wook;Kwak, Do-Yeon;Oh, In-Seok;Kim, Ki-Young
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.57 no.3
    • /
    • pp.280-285
    • /
    • 2012
  • This study was conducted to establish proper milling condition and harvesting time for improving the milling recovery of head foxtail millet grain. Brown foxtail millet recovery and the percentage of head foxtail millet recovery were significantly different according to the number of hulling and milling time. Also, the interaction of these factors had influence on brown foxtail millet recovery and the percentage of head foxtail millet recovery. To improve the percentage of head foxtail millet recovery, it was effective to hull grain twice and mill for 1.30 minute. 1000-grain weight of brown foxtail millet, brown foxtail millet recovery, hardness of brown foxtail millet, milling recovery, and the percentage of milling recovery of head foxtail millet grain were significantly different according to harvesting day after heading. For improving the ratio of ripened grain and the percentage of recovery of head foxtail millet, it is recommended to harvest 45 days (accumulated temperature : $1,148^{\circ}C$) after heading (DAH) in early maturing Hwangkeumjo, 50 DAH (accumulated temperature : $1,150^{\circ}C$) in mid-late maturing Samdamae and Kyeongkwan1, and 55 DAH (accumulated temperature : $1,168^{\circ}C$) in late maturing Samdachal.

Bone Mineral Density of Korean Mother-daughter Pairs : Relations to Anthropometric Measurement, Body Composition, Bone Markers, Nutrient Intakes and Energy Expenditure (모녀간의 골밀도 : 신체 측정치 및 체조성, 골지표, 영양소 섭취량 및 에너지 소비량과의 관계)

  • 이희자
    • Journal of Nutrition and Health
    • /
    • v.29 no.9
    • /
    • pp.991-1002
    • /
    • 1996
  • The objectives of this study were to obtain normative data for 45 mother-daughter pairs on spine, femur(neck, ward's triangle, trochanter) and total body BMD (bone mineral density) measured by dual energy X-ray absorptiometry, anthropometric measurement, body composition, biochemical markers, nutrient intakes and energy expenditure, to determin the interrelations of these factors within each group, to measure familial resemblance for each variable. We observed significantly positive correlations between height, weight, head, hip and calf circumferences, tricep, femur and calf skinfold thickness, total lean body mass(=weight-total fat body mass-bone mineral content), protein and fat intakes, Ca index, serum total protein and albumin of monter-daughter pairs(p<.05-p<.001). Among mothers, age, osteocalcin, higher, weight, Ca and energy intakes were predictors of BMDs. Among daughters, weight and energy intake were predictors of BMDs. The BMD in lumbar spine(r=.48, p<.01), femoral neck(r=.38, p<.05), ward's triangle(r=.36, p<.05) of the mothers were significantly correlated with those of the daughters, after adjustment for mother's age, hight, weight, osteocalcin, Ca and energy intakes and daughter's weight, energy intake. In regression analyses, mother's BMD also were positively associated with daughter's BMD in lumbar spine, femoral neck, ward's triangle. Our findings support that mothers with low BMD tended to have daughters with low BMD. In the age groups studied, as well genetic factors as environmental factors may have an important role in determining BMD. This study suggests that women may successfully enhance their genetically determined BMD through adequate nutrient intakes and weight bearing exercise.

  • PDF

The Effect of the Weight of a Backpack on Craniovertebral Angle and Neck Muscle Activities on Some University Students (백팩 무게가 일부 대학생의 머리척추각과 목 근활성도에 미치는 영향)

  • Park, Cheon-jun;An, Duk-hyun
    • Physical Therapy Korea
    • /
    • v.27 no.1
    • /
    • pp.45-52
    • /
    • 2020
  • Background: A backpack is available equipment for moving some objects. Most studies have found that the appropriate weight limit of backpack for students is between 10% to 15% of their body weight (BW). However, Some students should carry a backpack heavier than 15% of BW. Therefore, It is associated with abnormal shoulder and neck posture on students. Objects: This study tested the effects that various amounts of weight carried by university students in their backpacks had on their cervical posture and electromyography of neck muscle. Methods: The subjects consisted of 12 students (6 male, 6 female) in university. There were three loading conditions tested: no backpack, a backpack that weighed 10% and 15% of the student's BW. The dependent variables were the craniovertebral angle (tragus to C7) and the neck muscle activities (sternocleidomastoid, upper trapezius). All 12 subjects were asked to walk while wearing a backpack for 5 minutes and were then instructed to rest for 2 minutes. Results: When assessing the craniovertebral angle, the results of this study were significantly decreased in the order of 0%, 10%, and 15%. And then, there were significantly increased electromyography of neck muscles that comparison of the weight of 10% and 15% on 0%. It was found that as the weight of the backpack increased, the craniovertebral angle decreased (p < 0.05) and the muscle activities increased (upper trapezius p = 0.012, sternocleidomastoid p = 0.013). Conclusion: Our study recommended that some students shouldn't carry on over the 15% backpack of own weight, and also they should distribute backpack load to equal on body for optimal posture.

Practicality of Woo's Super Rudder Controlling (우즈 수퍼러더조선법의 실용성에 관하여)

  • 우병구
    • Journal of the Korean Institute of Navigation
    • /
    • v.17 no.3
    • /
    • pp.69-76
    • /
    • 1993
  • In harbour the practical shiphandlers should have a expert knowledge of systematically reducing head-way and keeping ship's positions to the final position with confidence and under control. But now in the practical approaches we do not have any special maneuvers of controlling the ship effi-ciently regarding the headway and approaches except some existing reduction of speeds according to the Weight-to-Power Ratio, use of astern power and Rudder Cycling. Consequently this study put Woo's Super Rudder Controlling originally developed by Captain Woo, Ph. D. to practical use as a special maneuvers in the port approaches. The conclusions of this paper are drawn as follows : 1) Optimum standard and desirable controls in combination of three engine speeds with three yaw ang-les were proposed for the practical shiphandlers, 2) According to simulation of the pilotships the Super advances are 10.5 ship lengths for Full full full maneuvers, and 7.9 ship lengths for Full half maneuvers approximately, 3) Approach maneuvers to anchorages by trying Woo's Super Rudder Controlling saved about 30% of total standby time in comparison with the existing Weight-to-Power Ratio maneuvers in the Pusan and Kwang Yang ports.

  • PDF

Comparison of Treatment Compliance and Nutritional Outcomes among Patients with Nasopharyngeal Carcinoma with and without Percutaneous Endoscopic Gastrostomy during Chemoradiation

  • Peerawong, Thanarpan;Phungrassami, Temsak;Pruegsanusak, Kovit;Sangthong, Rassamee
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.13 no.11
    • /
    • pp.5805-5809
    • /
    • 2012
  • Aims: The study aimed to compare treatment compliance and nutritional outcomes in nasopharyngeal carcinoma (NPC) patients during chemoradiation. Methods: Clinical information of patients with NPC that underwent chemoradiation during 2004-2009 were retrieved from the hospital database and retrospectively reviewed. Patients were categorised into a prophylactic percutaneous endoscopic gastrostomy (PPEG) group and a non-PPEG group. Clinical information including treatment compliance, weight, haematological and renal toxicity was compared. Results: A total of 219 patients were reviewed and categorised into PPEG (n=77) and non-PPEG (n=142). Significant differences in absolute percentage weight loss between groups were found from the $3^{rd}$ cycle of chemotherapy. There were 24.2, 20.3 and 24.8% in the third, the fourth and the fifth cycles of chemotherapy, respectively. Migration of grade 2 to grade 3 weight loss was obviously seen in the $3^{rd}$ cycle as well. A significant difference of grade 3 or more hypokalemia was found with values of 14.3% and 50% in the PPEG and non-PPEG groups, respectively. Other toxicity parameters and treatment compliance were not different between the groups. Conclusions: Use of PPEG resulted in decreased severe weight loss, reduced migration from grade 2 to grade 3 weight loss and reduced hypokalaemia. However, benefits in treatment compliance could not be detected. So consideration of PPEG in NPC patients requires care.

A Study on the Weight Optimization for the Passenger Car Seat Frame Part (상용승용차 시트프레임 부품의 중량 최적화에 관한 연구)

  • Jang, In-Sik;Min, Byeong-Jo
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.14 no.5
    • /
    • pp.155-163
    • /
    • 2006
  • Car seat is one the most important element to make comfortable drivability. It can absorb the impact or vibration during driving state. In addition to those factors, it is needed to have enough strength for passenger safety. From energy efficiency and environmental point of view lighter passenger car seat frame becomes hot issue in the auto industry. In this paper, weight optimization methodology is investigated for commercial car seat frame using CAE. Optimized designs for seat frame are developed using commercially available finite element code(ANSYS) and design of experiment method. At first, car seat frame is modelled using 3-D computer aided design tool(CATIA) and simplified for finite element modelling. Finite element analysis is carried out for the case of FMVSS 202 Head Restraint test to check the strength of the original seat frame. Two base brackets are selected as optimized elements that are the heaviest parts in the seat frame. After finite element analysis for the brackets with similar load condition to the previous test optimization technique is applied for 10% to 50% weight reduction. Design of experiment is utilized to obtain optimization design for the bracket based on the modified 50% weight reduction model in which outer shape of the bracket is conserved. Weight optimization models result in the decrease of the strength in spite of weight reduction. The more design points should be considered to get better optimized model. The more advanced optimization technique may be utilized for more parts of the seat frame to increase whole seat frame characteristics in the future.

Characteristics of Pig Carcass and Primal Cuts Measured by the Autofom III Depend on Seasonal Classification

  • Choi, Jungseok;Kwon, Kimun;Lee, Youngkyu;Ko, Eunyoung;Kim, Yongsun;Choi, Yangil
    • Food Science of Animal Resources
    • /
    • v.39 no.2
    • /
    • pp.332-344
    • /
    • 2019
  • The objective of this study was to investigate slaughtering performance, carcass grade, and quantitative traits of cuts according to seasonal influence by each month in pigs slaughtered in livestock processing complex (LPC) slaughterhouse in Korea, 2017. A total of 267,990 LYD ($Landrace{\times}Yorkshire{\times}Duroc$) pig data were used in this study. Results of slaughter heads, sex distribution, carcass weight, backfat thickness, grading class, total weight, and fat and lean meat percentages of each cut predicted by AutoFom III were obtained each month. The number of slaughtered pigs was the highest in early and late fall but the lowest in midsummer. Only in midsummer that the number of females was higher than that of castrates. During 2017, carcass weight was the lowest in late summer. Backfat thickness was in the range of 21-22 mm. In mid and late spring, pigs showed high 1+ grade ratio (37.05% and 36.15%, respectively). For traits of 11 cuts predicted by AutoFom III, porkbelly showed lower total weight, lean weight, and fat weight in midsummer to early fall but higher lean meat percentage compared to other seasons. Weights of deboned neck, loin, and lean meat were the highest in midfall compared to other seasons (p<0.05). In conclusion, characteristics of slaughtering, grading, and economic traits of pigs seemed to be highly seasonal. They were influenced by seasons. Results of this study could be used as basic data to develop seasonal specified management ways to improve pork production.

A Body Condition Scoring System for Bali Cattle

  • Soares, F.S.;Dryden, G. McL.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.24 no.11
    • /
    • pp.1587-1594
    • /
    • 2011
  • Live weight, body length, hip and shoulder heights, heart girth, and metatarsal length were measured on 100 one to two years old Bali (Bos javanicus) bulls. Multiple regression of these measurements on live weight gave a prediction equation involving heart girth and body length (prediction $R^2$ = 0.845). These measurements were also used to derive several frame scores (FS). Live weight (Lwt) divided by FS was used as an index of body condition. Lwt/(length+hip height) was normally distributed and highly correlated with other normally-distributed condition indexes. This index was used to define five body condition scores. These were used to develop a five-point body condition scoring system in which the amount of fleshing over the vertebral processes, ribs, hindquarters, tail head, hooks, at the top of the neck, and the shoulders, the development of wrinkles in the skin above the hock and the neck, and the size of the dewlap, were used to describe the different body condition scores. Animals of score 1 had prominent hooks, shoulders, vertebrae and ribs, and hollow hindquarters and flat tailhead. Score 5 animals had rounded hindquarters, well-filled upper hind legs, small mounds of soft tissue were apparent on the tailhead, their hooks, necks, shoulders, vertebrae and ribs were well covered, and the dewlap was prominent.