• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.342-345
• /
• 2005

To detect external acoustic signal, fiber optic sensor array using Fabry-Perot interferometer which had benefit of minimize and light-weight was used. The sensor head has 1cm in length, total length of fiber is 9.5cm, and the sensor supported at both ends, simply. External sound applied in lateral direction and detected two signals were compared each other. It was confirmed that the Fabry-Perot interferometric sensor array detected acoustic signal, effectively.

• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.2
• /
• pp.53-65
• /
• 2018

The load condition significantly influences ship maneuverability in calm water. In this research, the effect of the load condition on turning performance of a very large crude oil carrier (VLCC) sailing in adverse weather conditions is investigated by an MMG-based maneuvering simulation method. The relative drift direction of the ship in turning to the wave direction is $20^{\circ}-30^{\circ}$ in ballast load condition (NB) and full load condition (DF) with a rudder angle $35^{\circ}$ and almost constant for any wind (wave) directions. The drifting displacement in turning under NB becomes larger than that under DF at the same environmental condition. Advance $A_d$ and tactical diameter $D_t$ become significantly small with an increasing Beaufort scale in head wind and waves when approaching, although $A_d$ and $D_t$ are almost constant in following wind and waves. In beam wind and waves, the tendency depends on the plus and minus of the rudder angle.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1075-1078
• /
• 1999

In this study, a new algorithm for canceling MRI artifacts through the translational motion of image plane is presented. Bloating is often makes problems in a clinical diagnosis. Assuming that the head moves up and down due to breathing, rigid translational motions in only y(phase encoding axis) direction is treated. First, we notice that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non zero area of the spectrum just corresponds to x axis projected area of the density function. So the motion is estimated by tracing the edges of the spectrum, and the x directional motion is canceled by shifting the spectrum in inverse direction. Next, the y directional motion is canceled using a new constraint, with which the motion component and the true image component can be separated. Finally, the effectiveness of this algorithm is shown by using a phantom with simulated motions.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.553-561
• /
• 2010

This paper discusses the next direction for user experience design to keep pace with an ongoing IT paradigm shift, particularly focused on UX standardization activity contributing to reinforcement of brand power and customer loyalty. The paper introduces a model that identifies four levels of UX standardization and a key concept called "sustainable UX ecosystem" as its top level. It argues that in the new IT paradigm the fourth level of UX standardization, the sustainable UX ecosystem, is the next direction user experience must head towards.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.445-455
• /
• 2015

Korea furniture industry is the difficulty of producing manpower supply and demand together with rising raw material and are facing severe difficulties as a diversification of consumer needs. It located so close through the International Furniture Fair in China and to identify the status of the domestic furniture industry. It also overlooks want to move forward in the direction. China International Furniture Fair was the head of the leading exchanges for furniture production worldwide. Market demand as households, yet the center is fully equipped with the chance to cooperate with the furniture production. The Shanghai International Furniture Fair was responsible for, such as providing ideas and partners for product development and production paths excavation of korea furniture manufacturers itgetda which can have a significant driving force in overcoming the recession and evaluated through this.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.161-166
• /
• 2006

A new fiber orientation sensor has been developed and tested on an actual paper machine to demonstrate its capability to function as a real-time monitoring system. First, we demonstrate the ability of the sensor system to detect the change in the fiber orientation angle while the sensor head, and not the paper, was intentionally rotated from $-90^{\circ}\;to\;+70^{\circ}$ with respect to the paper-traveling direction. Next, we demonstrate that this system can successfully detect the change in the magnitude and angle of fiber orientation in running paper when the direction of material flow on the wire was changed on the paper machine. The angle and magnitude of fiber orientation were independently confirmed by SST and MOA measurements. Furthermore, we found that the system was capable of measuring the basis weight and the moisture content of running paper while detecting the angle and magnitude of fiber orientation.

• The korean journal of orthodontics
• /
• v.16 no.2
• /
• pp.31-41
• /
• 1986

The purpose of this study is to examine the initial reaction of craniofacial complex to the traction of headgears which are frequent used in dinical practice by using holographic interference method. Changes in the fringe pattern according to the traction conditions (outer bow length, load amount, direction) were compared. Human dry skull was used as experimental material, the results were as follows. 1. The density of fringes increased with an increase in load. 2. Maxillary headgear affected circummaxillary bones-temporal bone, zygomatic bone, nasal bone, frontal bone, sphenoid bone as well as maxilla. 3. The most upward-backward displacement was observed in a high pull head gear $(30^{\circ})$, this is though to be a optimal direction for supressing the growth of the maxilla.

• The Journal of Korean Physical Therapy
• /
• v.5 no.1
• /
• pp.71-77
• /
• 1993

The baby makes very great strides in the first year of his life. The developmental principles may be summarised as follows : first, the continuous process from conception to maturity, second, the physical manifestation of neural maturation, third, the cephalocaudal direction, from proximal to distal, fourth generalized mass activity to specific individual responses, fifth, reflex dominance to integration. The stages of normal movement development an head control, rolling creeping(on belly), sitting crawling(on hands and on knees), standing and walking. The knowledge of normal movement development needs for the assessment treatment and management of C.N.S. injuried infant.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.574-579
• /
• 1995

Saturated boiling heat transfer experiment in a hemispherical narrow space is conducted using Freon-113 to investigate an additional heat removal capability through a hypothetical gap between lower head and degraded core. The narrow space of 1mm consists of a 124mm diameter heated stainless steel hemisphere and a glass outer vessel. Within the hemispherical narrow space large coalesced bubbles are produced and these bubbles rise in random direction, causing liquid flow in from the opposite side to fill the region. Such flow in random direction makes the flow field in the narrow space very chaotic and thus enhance heat transfer. The heat transfer coefficient is higher at lower angle and at higher heat flux. The present study shows that the liquid from upper region can effectively penetrate into the gap and augment the heat removal capability through tile gap.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.676-683
• /
• 2008

It is developed in domestic and position Tilting train's Onboard Cabsignal system at the car of the train follows in the route which comes to be applied and application environment and the scope of function and application of equipment is different applied. The development direction of signal equipment at the domestic car must secure the maintenance conservativeness and a fundamental technique of hereafter. It will reach and to respect standardization of technical power it leads and must be applied development or. Consequently, Domestic it is developed tilting it investigates the application scope of the train. It investigates the development direction of signal equipment at the hereafter car. Currently it researches the signal equipment of top of head of a family enemy conditions grudge. Also, It was improved the scope of application function in following and it considered it researched the quality thing and the signal equipment at the car.