• Title/Summary/Keyword: hazardous heavy metals

Search Result 197, Processing Time 0.031 seconds

Concentrations of SPM and Ambient Hazardous Heavy Metals in an Industrial Complex Area in Daegu City (대구시 산단지역 대기 중 SPM과 유해중금속성분의 농도)

  • Song, Hee-Bong;Kwon, Jong-Dae;Park, Su-Kyoung;Kim, Eun-Kyung;Yoon, Hyun-Suk;Ju, Myeong-Hui;Bae, Gi-Soo
    • Journal of Environmental Health Sciences
    • /
    • v.41 no.4
    • /
    • pp.259-267
    • /
    • 2015
  • Objectives: This study evaluated the regional and seasonal concentrations of ambient hazardous heavy metals in an industrial complex area in Daegu City. Methods: A total of 64 SPM (Suspended Particulate Matter) samples were collected in non-industrial and industrial areas during 2014 and were analyzed for hazardous heavy metals elements (As, Cd, Mn, Ni, Pb) with ICP after acid extraction. Results: SPM and hazardous heavy metals concentrations showed regional (industrial complex area>non-industrial complex area) and seasonal (spring, winter>fall, summer) variations. All of the hazardous heavy metals were influenced by anthropogenic sources. The pollution index of hazardous heavy metals was very low, showing roughly one-quarter of the level of the air quality guidelines of WHO. The correlation analysis among SPM and hazardous heavy metals indicated that components of non-industrial complex areas were more related to each other than those of industrial complex areas, and the correlation in the winter was higher than in other seasons. Conclusion: It is necessary to control air pollution sources and establish related policy because hazardous heavy metals from industrial areas can influence residential areas.

The Recognition Level of Food Contamination with Residual Pesticides and Hazardous Heavy Metals in Taejon Area (식품의 잔류농약 및 유해중금속의 오염인식도 -대전지역을 중심으로-)

  • 한장일;김성애
    • Korean Journal of Community Nutrition
    • /
    • v.3 no.3
    • /
    • pp.454-465
    • /
    • 1998
  • This study was to investigate the recognition level of food contamination with residual pesticides and hazardous heavy metals from 365 male and female adults in Taejon area using questionnaires. Among the recognizing level of residual pesticides in overall foods, 69.1% were 'serious', 25.6% were 'average' and 5.3% were 'not serious'. Over 94.7% of the subjects recognized residual pesticides pollution infoods. for hazardous heavy metals in food, 47.8% responsed as 'serious', 40.5% as 'average' and 11.8 as ' not serious' . Over 88.3% of the subjects recognized contaminated pesticides seriously in fruits, 72.1% in vegetables and 51.7% in cereals, whereas 55.7% of the subjects recognized hazardous heavy metal contamination seriously in fruits, 53.4% in vegetables, 40.8% in fishes and shellfishes and 35.0% in seaweeds. The subjects recognized residual pesticides contamination more seriously in overall foods, cereal, potatoes and starches, bean, vegetables and fruits, whereas hazardous heavy metal contamination was recognized more seriously in fishes and shellfishes, and seaweeds food groups. Comparisons were shown based on individuial's occupation. Farmer, forester, iner and fisher showed the lowest recognizing level of food contamination in most food groups. The mean score of the dietary effect by mass media's information on food contamination from residual pesticides and hazardous heavy metals were 3.51±0.96 out of 5 points. By Duncan's multiple range test, sex, age, marriage, food cost per month, concerns about health and nutrition knowledge showed significant differences in the mean effect score at p<0.05. According to a pesticides contamination in several food groups were affected by food cost per month, mass media's information on food contamination, health status, and concerns about health, But a recognition level of hazardous heavy metals in food were affected by income and, food cost per month mass media's information on food contamination, health status, concern about health and nutrition knowledge. People who need to take extreme precautions of food contamination were in order of producers, government officials, homemakers, the consumer's association and consumers.

  • PDF

Crystallization of the Fly Ash from Municipal Incinerator (도시쓰레기 소각로 비산재 용융결정화 및 용출특성)

  • Lee, Hye-Mun;Kim, U-Hyeon;Lee, Jeong-Gyu
    • 연구논문집
    • /
    • s.31
    • /
    • pp.5-14
    • /
    • 2001
  • These days, interest in the leaching of hazardous heavy metals to consist of incinerator fly ash is increasing, because the heavy metals that leach from the incinerator fly ash pollute the soil and ground water. Therefore this study was undertaken to crystallize the fly ash and prevent the leaching of hazardous heavy metals from fly ash. The concentrations and the leaching concentration of hazardous heavy metals(Cd, Cr, Hg, Pb, Zn) in the law incinerator fly ash have been measured. The fly ash was melted with two kinds of flux($Na_2CO_3, CaCO_3$) and its add quantity(0, 1, 2, 3 wt%). The crystal structure of melting materials was analyzed by SEM(Scaning Electron Microscope) and X-RD(X-Ray Diffractometer). The leaching test of melting materials was undertaken. And the relation between crystallization of melting materials and flux and leaching concentration. These experiments indicate that the concentration and leaching concentration of heavy metals in incinerator fly ash was much higher than the regulatory standard for leachates in Korea and U.S.A and average concentration of heavy metals in soil. And the crystal structure was better.

  • PDF

Heavy Metal Risk Management: Case Analysis

  • Kim, Ji-Ae;Lee, Seung-Ha;Choi, Seung-Hyun;Jung, Ki-Kyung;Park, Mi-Sun;Jeong, Ji-Yoon;Hwang, Myung-Sil;Yoon, Hae-Jung;Choi, Dal-Woong
    • Toxicological Research
    • /
    • v.28 no.3
    • /
    • pp.143-149
    • /
    • 2012
  • To prepare measures for practical policy utilization and the control of heavy metals, hazard control related institutions by country, present states of control by country, and present states of control by heavy metals were examined. Hazard control cases by heavy metals in various countries were compared and analyzed. In certain countries (e.g., the U.S., the U.K., and Japan), hazardous substances found in foods (e.g., arsenic, lead, cadmium, and mercury) are controlled. In addition, the Joint FAO/WHO Expert Committee on Food Additives (JECFA) recommends calculating the provisional tolerable weekly intake (PTWI) of individual heavy metals instead of the acceptable daily intake (ADI) to compare their pollution levels considering their toxicity accumulated in the human body. In Korea, exposure assessments have been conducted, and in other countries, hazardous substances are controlled by various governing bodies. As such, in Korea and other countries, diverse food heavy metal monitoring and human body exposure assessments are conducted, and reducing measures are prepared accordingly. To reduce the danger of hazardous substances, many countries provide leaflets and guidelines, develop hazardous heavy metal intake recommendations, and take necessary actions. Hazard control case analyses can assist in securing consumer safety by establishing systematic and reliable hazard control methods.

Comparative Study of Hazardous Heavy Metal Contents by Cosmetic Type (화장품 유형별 유해 중금속 함량 비교 연구)

  • Lee, Jin hee;Kim, Ji Yeon;Park, Sang Gyu;Lee, Jae Ho;Yoon, Jong Ho;Kim, Gyoung Tae;Kim, Hae Jung
    • Journal of Environmental Health Sciences
    • /
    • v.45 no.2
    • /
    • pp.154-163
    • /
    • 2019
  • Objectives: The hazardous heavy metal contents of cosmetics were investigated and the resulting values were compared by type of cosmetics: skin care preparations (SCP), hair preparations (HP), makeup preparations (MP), and eye makeup preparations (EMP). Methods: The hazardous heavy metal contents (Pb, As, Cd, Sb, Ni and Hg) were analyzed for 358 cosmetics products (187 SCP, 82 HP, 56 MP, and 33 EMP). Hg was measured by the amalgamation method, and other hazardous heavy metals were measured by inductively coupled plasma optical emission spectrometer (ICP-OES) after decomposition using the microwave method. Results: The mean contents of Pb, As, Cd, Sb, Ni, and Hg in cosmetics were 0.424, 0.068, 0.024, 0.398, $0.567{\mu}/g$, and Not Detected, respectively. All of the hazardous heavy metals were detected in most products, but below the recommended maximums of the Ministry of Food and Drug Safety. The level of Cd was the lowest at 14.8%, and Sb was the highest at 41.2%. Pb, Sb and Ni showed the highest mean value and detection rate in EMP. As, Cd, and Hg showed the highest in SCP, HP, and MP, respectively. Conclusion: Hazardous heavy metals were detected in most products. In particular, Pb, Sb, and Ni were broadly detected in EMP, meaning more stringent quality control is required.

Hazardous Air Pollutants Emission Characteristics from Cement Kilns Co-burning Wastes

  • Pudasainee, Deepak;Kim, Jeong-Hun;Lee, Sang-Hyeob;Cho, Sung-Jin;Song, Geum-Ju;Seo, Yong-Chil
    • Environmental Engineering Research
    • /
    • v.14 no.4
    • /
    • pp.212-219
    • /
    • 2009
  • Emission characteristics of air pollutants from three commercially operating cement kilns co-burning waste were investigated. The major heavy metals emitted were mercury (Hg), zinc (Zn), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), and arsenic (As) Removal efficiency of the bag filter was above 98.5% for heavy metals (except Hg), and above 60% for Hg. Higher fractions of heavy metals entering the bag filter were speciated to cement kiln dust. On average, 3.3% of the -heavy metals of medium and low toxicity (Pb, Ni, and Cr) entering the bag filter were released into the atmosphere. Among highly toxic heavy metals, 0.14% of Cd, 0.01% of As, and 40% of Hg entering the bag filter were released into the atmosphere. In passing through the bag filter, the proportion of oxidized Hg in all cases increased. Emission variations of hazardous air pollutants in cement kilns tested were related to raw materials, fuel, waste feed and operating conditions. Volatile organic compounds detected in gas emissions were toluene, acrylonitrile benzene, styrene, 1,3-butadiene, and methylene chloride. Although hazardous air pollutants in emissions from cement kilns co-burning waste were within the existing emission limit, efforts are required to minimize their levels.

Study on scheme for screening, quantification and interpretation of trace amounts of hazardous inorganic substances influencing hazard classification of a substance in REACH registration (REACH 물질 등록 시 분류에 영향을 주는 미량 유해 무기물질의 스크리닝·정량·해석을 위한 체계도 연구)

  • Kwon, Hyun-ah;Park, Kwang Seo;Son, Seung Hwan;Choe, Eun Kyung;Kim, Sanghun
    • Analytical Science and Technology
    • /
    • v.32 no.6
    • /
    • pp.233-242
    • /
    • 2019
  • Substance identification is the first step of the REACH registration. It is essential in terms of Classification, Labelling and Packaging (CLP) regulation and because even trace amounts of impurities or additives can affect the classification. In this study, a scheme for the screening, quantification, and interpretation of trace amounts of hazardous inorganic substances is proposed to detect the presence of more than 0.1% hazardous inorganic substances that have been affecting the hazard classification. An exemplary list of hazardous inorganic substances was created from the substances of very high concern (SVHCs) in REACH. Among 201 SVHCs, there were 67 inorganic SVHCs containing at least one or ~2-3 heavy metals, such as As, Cd, Co, Cr, Pb, Sb, and Sn, in their molecular formula. The inorganic SVHCs are listed in excel format with a search function for these heavy metals so that the hazardous inorganic substances, including each heavy metal and the calculated ratio of its atomic weight to molecular weight of the hazardous inorganic substance containing it, can be searched. The case study was conducted to confirm the validity of the established scheme with zinc oxide (ZnO). In a substance that is made of ZnO, Pb was screened by XRF analysis and measured to be 0.04% (w/w) by ICP-OES analysis. After referring to the list, the presence of Pb was interpreted just as an impurity, but not as an impurity relevant for the classification. Future studies are needed to expand on this exemplary list of hazardous inorganic substances using proper regulatory data sources.

Analysis of Hazardous Heavy Metal in Colored Materials of Playground Facility for Children (어린이 놀이시설의 소재 색상에 따른 유해중금속 분석 연구)

  • Huh, Sun Hae;Weon, Jong-Il
    • Journal of the Korean Society of Safety
    • /
    • v.30 no.2
    • /
    • pp.14-20
    • /
    • 2015
  • The content of hazardous heavy metal of materials used in playground facility for children was investigated using X-ray fluorescence (XRF) and inductively coupled plasma (ICP) analyses, In order to examine the content of hazardous heavy metals according to the material color, four colors, i.e., green, red, yellow and blue, were categorized on the materials used. The highest lead content is observed in the yellow plastic samples. The yellow samples with relatively high lead content show that the chrome content is also high. This can explained that lead chromate, so-called chromium yellow, is normally used as a main pigment to express the yellow color. Therefore, it is concluded that hazardous heavy metal detected in the materials of playground facility for children is due to the pigments used for coloring. Based on above findings, the relationship between the color of materials used in playground facility for children and the content of hazardous heavy metal is discussed.

A Study on Removal of Harmful, Heavy Metals in Fly Ash from Municipal Incinerator

  • Nakahiro, Yoshitaka
    • Proceedings of the IEEK Conference
    • /
    • 2001.10a
    • /
    • pp.489-493
    • /
    • 2001
  • Big cities in Japan have serious problems due to the shortage of new reclaimed land for municipal wastes. If harmful heavy metals such as cadmium, lead, copper and etc. are contained in the municipal waste combustion residues, they are not able to fill up according to the environmental law in Japan. In this study, the removal of heavy metals in the fly ash (EP ash) was dealt with chloridizing vaporization method. EP ash as a non-hazardous materials is utilized as covering materials, road bed, and building materials.

  • PDF

Study on the Emission Characteristics of Heavy metals in sewage sludge Incinerator (하수슬러지 소각시설의 중금속 배출특성에 관한 연구)

  • Park, Jung-Min;Lee, Sang-Bo;Kim, Min-Jung;Kim, Jin-Pil;Kim, Jong-Chooun;Lee, Suk-Jo;Lee, Sang-Hak
    • Journal of environmental and Sanitary engineering
    • /
    • v.24 no.3
    • /
    • pp.28-36
    • /
    • 2009
  • We have closely examined the concentration change characteristics, emission amounts, and the material balance of hazardous air pollutants at both early and later stages of the prevention facilities. These results will be uses as the basic data when preparing for the regulatory and management plans for hazardous air pollutants. The results of the study on heavy metals illustrated that the content of heavy metals in sludge across five facilities were as follows: copper> zinc> chrome> nickel> cadmium> mercury. In terms of heavy metal content in swage sludge, the sludge in incinerating facilities other than the sludge in the D incinerating facility containing industrial water waste, was examined in order to satisfy the ocean contamination standard and fertilizer specifications. Most of the items were shown to have satisfied the emission tolerance standards in the latter part of the prevention facilities(The average elimination rate was over 90%). Therefore, it is concluded that swage sludge containing high-concentrate heavy metals needs to be incinerated rather than recycled as fertilizer.