• 제목/요약/키워드: hazard

검색결과 6,435건 처리시간 0.027초

석회암 지역 재해 등급도 작성 및 응용에 관한 사례 연구 (A Case Study for Construction Hazard Zonation Maps and its Application)

  • 정의진;윤운상;김중휘;마상준;김정환;이근병
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.165-172
    • /
    • 2002
  • We presents an hazard zonation mapping technique in karst terrain and its assessment. From the detailed engineering geological mapping. Controlling factors of sink hole and limestone cave formation were discussed and 4 main hazard factors affecting hazard potential are identified as follows: prerequisite hazard factor(distributions of pre-existing sink holes and cavities), geomorphological hazard factors(slope gradient, vegetation, and drainage pattern etc.) geological hazard factors(lithology, fracture patterns and geological structures etc.) and hydraulic conditions(hydraulic head, annual fluctuation of ground water table and composition of g/w water). From the construction of hazard zonation map along the Jecheon-Maepo area, and vertical cross-sectional hazard zonations specific tunnel site we suggest hazard zonation rating systems.

  • PDF

지진에 대한 사면의 재해위험지도 작성 - 울산시 울주군 지역을 중심으로- (Seismic Landslide Hazard Maps in Ul-Ju Ul-san Korea)

  • 조성원
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.89-96
    • /
    • 2000
  • Landslide damage comprise most part of the damages from the earthquake and it only causes the damage to lives and structures directly but also cease the operation of social system by road or lifeline failure. For these reasons hazard assesment on the landslides has been recognized very important. And hazard maps have been used to visualize the hazard of the landslide. In this study as first step for application of hazard map to domestic cases hazard maps are made for the Ul-Joo Ul-san Korea, Where the Yan-san faults are located. For building hazard maps the degree of hazard are evaluated based on Newmark displacement and the resulting maps are constructed by GIS technique. In hazard assesment maximum ground acceleration obtained from attenuation equation of wave propagation and design earthquake acceleration suggested by Ministry of construction are used for acceleration term. Hazard maps are made by GIS programs Arc/Info and Arc/View based on the digital maps and data from lab tests and elastic wave surveys The maps show the possible landslide regions significantly and the displacements of slide are proportional to the slope angles.

  • PDF

Hazard-Free를 考慮한 多値順序論理回路 (Hazard-Free Multi-valued sequential logic cirwits)

  • 林寅七 = In-Chil Lim;李秀英
    • 정보과학회지
    • /
    • 제5권2호
    • /
    • pp.94-98
    • /
    • 1987
  • 本 論文에서는 多値論理回路를 實現함에 있어서 發生하는 Hazard를 2가 지, 卽 Function Hazard와 Logic Hazard로 分類하였고 이의 解決方案으로 入力 信號가 Switching하여 最終 安定 level에 到達했을 때 Switching函數를 決定하고 이 函數로써 Switching函數의 Unate性을 試圖하였다. 그리고 內部回路에서 信號 가 遷移될 때 內部回路의 遲延 遲延時間으로 말미암아 發生되는 Hazard狀態를 Redundant回路를 實現하였다. 또 이 論理回路를 基本으로한 N値 Flip-flop N과 Shift Register, Counter等의 順序論理回路를 構成하였다.

HAZARD ASSESSMENT OF CURRENT STATE OF VEGETATION DEGRADATION USING GIS, A CASE STUDY: SADRA REGION, IRAN

  • Masoudi, Masoud;Amiri, E.
    • Journal of Ecology and Environment
    • /
    • 제36권1호
    • /
    • pp.49-56
    • /
    • 2013
  • The entire land of Southern Iran faces problems arising out of various types of land degradation of which vegetation degradation forms one of the major types. The present work introduces a model developed for assessing the current status of hazard of vegetation degradation using Geographic Information System (GIS). This kind of assessment differs from those assessments based on vulnerability or potential hazard assessments. The Sadra watershed which covers the upper reaches of Marharlu basin, Fars Province, has been chosen for a hazard assessment of this type of degradation. The different kinds of data for indicators of current status of vegetation degradation were gathered from collecting of field data and also records of the governmental offices of Iran. Taking into consideration three indicators of current status of vegetation degradation the model identifies areas with different hazard classes. By fixing the thresholds of severity classes of the three indicators including per cent of vegetation cover, biomass production and ratio of actual biomass to potential biomass production, a hazard map for each indicator was first prepared in GIS. The final hazard map of current status of vegetation degradation was prepared by intersecting three hazards in the GIS. Results show areas under severe hazard class have been found to be widespread (89 %) while areas under moderate and very severe hazard classes have been found less extensive in the Sadra watershed. The preparation of hazard maps based on the GIS analysis of these indicators will be helpful for prioritizing the areas to initiate remedial measures.

지진 재해도의 닫힌 근사식 제안에 관한 연구 (A Study to Propose Closed-form Approximations of Seismic Hazard)

  • 곽신영;함대기
    • 한국지진공학회논문집
    • /
    • 제22권4호
    • /
    • pp.245-251
    • /
    • 2018
  • In this paper, we address some issues in existing seismic hazard closed-form equations and present a novel seismic hazard equation form to overcome these issues. The presented equation form is based on higher-order polynomials, which can well describe the seismic hazard information with relatively high non-linearity. The accuracy of the proposed form is illustrated not only in the seismic hazard data itself but also in estimating the annual probability of failure (APF) of the structural systems. For this purpose, the information on seismic hazard is used in representative areas of the United States (West : Los Angeles, Central : Memphis and Kansas, East : Charleston). Examples regarding the APF estimation are the analyses of existing platform structure and nuclear power plant problems. As a result of the numerical example analyses, it is confirmed that the higher-order-polynomial-based hazard form presented in this paper could predict the APF values of the two example structure systems as well as the given seismic hazard data relatively accurately compared with the existing closed-form hazard equations. Therefore, in the future, it is expected that we can derive a new improved APF function by combining the proposed hazard formula with the existing fragility equation.

Factors that Impact Construction Workers' Hazard Recognition Ability and their Technological Solutions

  • Shrestha, Bandana;Park, JeeWoong;Shrestha, Pramen
    • 국제학술발표논문집
    • /
    • The 9th International Conference on Construction Engineering and Project Management
    • /
    • pp.458-464
    • /
    • 2022
  • Hazard recognition is considered as one of the pre-requisites for effective hazard management and injury prevention. However, in complex and changing environments, construction workers are often unable to identify all possible hazards that can occur in the jobsite. Therefore, identification of factors that impact hazard recognition in the work environment is necessary to reduce safety incidents as well as to develop strategies that can improve worker's hazard recognition performance. This study identified factors/problems that impact worker's hazard recognition abilities and suggested some potential technologies that can mitigate such problems. Literature reviews of journal articles and published reports related to hazard recognition studies were conducted to identify the factors. The study found out that the major factor responsible for affecting worker's hazard recognition abilities were human-related. Industry factors, Organizational factors and Physical factors of the site were the other factors identified from the study that impact worker's hazard recognition performances. The findings from the study can help site personnel recognize areas where effective measures can be directed towards worksite safety of workers while working in complex construction environments.

  • PDF

시뮬레이션에서 Total Hazard 를 이용한 신뢰도 추정 (Reliability Estimation by Simulation Using Total Hazard)

  • 전치혁
    • 한국경영과학회지
    • /
    • 제16권1호
    • /
    • pp.59-67
    • /
    • 1991
  • The hazard estimator is proposed for estimating system failure probability of a general network where all minimal cut sets are given. Theoretical variance of the hazard estimator is derived in a bridge system. It is demonstrated that variance of the hazard estimator is much smaller than that of the raw simulation estimator particularly for small arc failure probability.

  • PDF

물질안전보건자료 대상물질의 유해성 분류기준 적용 연구 (Study on applying to Hazard Classification Criteria of Chemicals subject to Material Safety Data Sheets)

  • 이혜진;이나루;이인섭
    • 한국산업보건학회지
    • /
    • 제30권3호
    • /
    • pp.280-291
    • /
    • 2020
  • Objectives: Hazard classification is a controversial issue in the new MSDS system in which chemical companies have to prepare and submit MSDS for chemicals that they manufacture or import to the competent authorities according to the amended Occupational Safety and Health Act. The aim of this study is to suggest how to apply and manage harmonized hazard classification criteria and results by investigating current hazard classification systems and trends. Methods: The domestic issues about different hazard classification criteria and results were investigated by reviewing the literature and business outcomes regarding KOSHA. We also checked official and unofficial reports from the UN to understand international discussion about the topic. Chemical hazard classification results from agencies providing chemical information were analyzed to compare a harmonized rate between classifications. Furthermore, a field survey of a few chemical companies was conducted. Results: Under the related competent authorities, an integrated standard proposal was developed to harmonize the domestic hazard classification criteria. Although harmonized chemical information is strongly needed, we recognized the uncertainty and difficulty of harmonized hazard classification from the UN global list project review. In practice the harmonization rate of the classification was generally low between the classification in KOSHA, MoE, and EU CLP. Among hazard classes, health hazards largely led the disharmony. The field survey revealed a change of perception that the main body of chemical information production is manufacturers. Approaches and solutions about hazard classification issues differed depending on business size, types of chemical handling, and other factors. Conclusions: We proposed reasonable ways by time and step to apply hazard classification in the new MSDS system. Chemical manufacturers should make and offer chemical information including responsible hazard classifications. The government should primarily accept these classifications, evaluate them by priority, and support or supervise workplaces in order to communicate reliable chemical information.

잠재프로파일분석을 통한 임금근로자의 위험요인 노출 유형분류 및 영향요인 검증 (Classifying Latent Profiles in the Exposure to Hazard Factors of Salaried Employees)

  • 이은진;홍세희
    • 한국산업보건학회지
    • /
    • 제31권3호
    • /
    • pp.237-254
    • /
    • 2021
  • Objectives: This study aims to classify the latent profiles in the exposure to hazard factors of salaried employees and test the determinants. Methods: Latent profile analysis(LPA) was conducted using data from the fifth Korean Working Conditions Survey(KWCS). 30,050 of salaried employees were the subjects of this study. After classifying the employees, multinomial logistic regression was used to test the determinants. Results: Salaried employees were classified with three latent profiles based on the exposure to the hazard factors. Employees included in class 1(32.8%) tend to experience low level of physical hazard factors, moderate level of psychological hazard factors, and high level of office work hazard factors. Employees included in class 2(61.8%) tend to be exposed to the moderate to high level of physical hazard factors, moderate to low level of psychological hazard factors, and low level of office work hazard factors. Employees included in class 3(5.4%) tend to experience high level of psychological and physical hazard factors, and moderate level of office work hazard factors. After classification, the demographic, health-, and employment-related variables were tested. Conclusions: This study clarified the features of each class, and proved that employees in class 3 are quite hazardous in that they are exposed to physical and psychological hazard factors much more frequently than other employees. Thus, this study can be used in predicting the high-risk employees and taking preemptive measures for preventing industrial accidents.

화학물질배출이동량 자료를 활용한 화학물질배출량 및 유해기반지수 정량화와 시공간 특성 연구 (A Study on the Spatiotemporal Characteristics of Chemical Discharges and Quantified Hazard-Based Result Scores Using Pollutant Release and Transfer Register Data)

  • 임유라;간순영;배현주
    • 한국환경보건학회지
    • /
    • 제48권5호
    • /
    • pp.272-281
    • /
    • 2022
  • Background: The constant consumption of chemical products owing to expanding industrialization has led to an increase in public interest in chemical substances. As the production and disposal processes for these chemical products cause environmental problems, regional information on the hazard level of chemical substances is required considering their effects on humans and in order to ensure environmental safety. Objectives: This study aimed to identify hazard contribution and spatiotemporal characteristics by region and chemical by calculating a hazard-based result score using pollutant release and transfer register (PRTR) data. Methods: This study calculated the chemical discharge and hazard-based result score from the Risk-Screening Environmental Indicators (RSEI) model, analyzed their spatiotemporal patterns, and identified hotspot areas where chemical discharges and high hazard-based scores were concentrated. The amount of chemical discharge and hazard-based risk scores for 250 cities and counties across South Korea were calculated using PRTR data from 2011 to 2018. Results: The chemical discharge (high densities in Incheon, Daegu, and Busan) and hazard-based result scores (high densities in Incheon, Chungcheongnam-do, and some areas of Gyeongsangnam-do Province) showed varying spatial patterns. The chemical discharge (A, B) and hazard-based result score (C, D) hotspots were identified. Additionally, identification of the hazard-based result scores revealed differences in the type of chemicals contributing to the discharge. Ethylbenzene accounted for ≥80% of the discharged chemicals in the discharge hotspots, while chromium accounted for >90% of the discharged chemicals in the hazard-based result score hotspots. Conclusions: The RSEI hazard-based result score is a quantitative indicator that considers the degree of impact on human health as a toxicity-weighted value. It can be used for the management of industries discharging chemical substances as well as local environmental health management.