• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.2
• /
• pp.111-120
• /
• 2009

There are barley, wheat, oat, rye and triticale winter cereal crops for whole crop silage. These small grains have been suitable to use for round-baled silage making as livestock feed. Studies were carried out to understand the growth and productivity of five winter cereals grown at paddy field in middle region of South Korea. The ratio of culm weight per plant were described by quadratic function for 5 winter cereals crops. The peak of culm ratio were 1 May in barley variety 'Youngyang', 5 May in wheat variety Keumkang', 10 May in rye 'Gogu'(Rye), 11 May in triticale variety 'Shinyoung' and 13 June in oat variety 'Samhan', respectively. The ratio of leaf per plant were linearly decreased by growing. In barley and oat, the ratio of spike weight per plant were linearly increased after heading, but in wheat and triticale, it were not accumulated at one time after heading and rapidly increased after fertilization. The ratio of spike weight per plant in barley was outstandingly higher than that of wheat, triticale, rye and oat, respectively. So, barley variety 'Youngyang' recommended for whole crop forage use was suitable for forage use because of high at ratio of the leaf and spike. The proper cutting date by the percentage of dry matter for baled-silage making, 30$[\sim}$40%, were 25 May in barley variety 'Youngyang', 25 May to 5 June in wheat variety 'Keumkang' and triticale variety 'Shinyoung', 15 May in rye 'Gogu' and 5 June in oat variety 'Samhan', respectively. The total aerial fresh weight accumulation at different cutting dates were described by quadratic function for barley, wheat and triticale. The forage fresh yield were peaked at 7 May in barley, 14 May in wheat, 17 May in triticale and late of May in oat, respectively. The dry matter yields of four small cereals were linearly increased after over-wintering. The yield at the date of proper harvesting time by water content for baled silage making were sequently high oat, barley, wheat, triticale and rye. The relative growth rate was relatively high in rye at early cutting but high in oat at late cutting. In barley, wheat and triticale, the rate were similar.

• Journal of agriculture & life science
• /
• v.43 no.2
• /
• pp.23-30
• /
• 2009

The object of this study was to evaluate the effect of the gibberellin treatment on fruit enlargement and ripening promotion in 'Niitaka' pear(Pyms pynfolia). Fruit weight was similar between $GA_{4+7}$ treatments and the gibberellin-paste control, but fairly increased of fruit weight compared to non-treatment Most effective time for $GA_{4+7}$ treatment to increase diameter and length was on 35 and 40 days after full bloom, respectively. Shape index was similar in all treatments. Fruit enlargement at the period of early growth, $GA_{4+7}$ 2.4% treatment was remarkably effective than $GA_{3}+GA_{4+7}$ 2.7% treatment or non-treatment However at the period of maturity, $GA_{4+7}$ 2.4% treatment and $GA_{3}+GA_{4+7}$ 2.7% treatment showed little differences in fruit enlargement and coloring. In maturing promotion effect, young fruit treated with $GA_{3}+GA_{4+7}$ showed similar fruit coloring to ethephon treatment on 35 days after full bloom, and both of those treatments promoted fruit coloring than non- treatment about 6 days. $GA_{3}+GA_{4+7}$ treatments resulted higher solid content and decreased acidity than non-treatment However, there was no differences in fruit hardness comparing to non-treatment As a result, gibberellin was most effective in fruit enlargement, so as all $GA_{3}+GA_{4+7}$ treatments were more effective on fruit enlargement than ethephon treatment or non-treatment Specifically, when $GA_{3}+GA_{4+7}$ was treated 35days after full bloom of flower, the diameter, the length and the shape of fruit index were best, and fruit coloring was good as well.

• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.107-114
• /
• 2011

The manila clam (Ruditapes philippinarum) is mainly distributed in the coastal area which consist of mud, sand and gravel, but they rarely live on the upper and down reaches of river. For a long time the manila clam has been inhabited in Taehwa river which has been exploited as a traditional earning resources and has become as a major object by neighborhood fishermen. This study was undertaken to evaluate stock assessment and to build management implications with the ecological parameters in Taehwa river from June 2009 to June 2010. The maximum age of manila clam was determined to 6 years old from observing ring radius of shell, the length and weight relationship was TW = $0.0002SL^{3.063}$ ($R^2$ = 0.925). K and $L_{\infty}$ were respectively estimated 46.64 mm and 0.341/year by von Bertalanffy growth. The instantaneous total mortality was estimated to be 1.171/year and the age at first capture was 1.37 years by the Pauly's method using shell length composition. The current total biomass of manila clam was calculated 1,483 mt over study area $1.46\;km^2$ by swept area method. ABC (Acceptable Biological Catch) estimates of manila clam showed 512 mt with using $F_{0.1}$. It's desirable to determine the optimum harvesting time as after main spawning season, as well as it's required to manage fisheries resources considering capture age and biomass through adjusting a first age at capture.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.5
• /
• pp.505-513
• /
• 1996

This study was conducted to investigate the variation of chemical components in stagnant water under different mulching amount of barley straw after combine harvesting and the effect of stagnent water on the germinatidn and seedling elongation at early growth stage in rice. pH was lower in barley straw mulching than non-mulching and decreased with increasing of mulched barley straw but was not different among treatments in stagnant water at 15 days after flooding. Dissolved oxygen decreased with the increasing of mulched barley straw and increased with the passing of time, while saline content increased with the increasing of mulched barley straw, showing significant difference among treatments, was peaked at 15 days after flooding and thereafter, decreased. NH4-N was higher 5 days after flooding with thicker barley straw mulching but was not different at 10 days. N $O_3$-N increased up to 10 to 15 days after flooding and increased with thicker barley straw mulching. Water soluble phosphorus and cation content ( $K^{+}$, $Ca^{2+}$, $Mg^{2+}$)were higher in thicker barley straw mulching and peaked at 10 and 15 days after flooding. Germination rate was decreased by thicker straw mulching and was high in order of medium late, medium and early maturing rice variety. Keumobyeo, Gancheokbyeo, Ilpumbyeo, Dongjinbyeo and Gyehwabyeo showed higher germination rate. Seedling elongation at early growth stage was poorer with increasing of barley. straw mulching. Ilpumbyeo had good seedling elongation in one time amount of barley straw mulching and Shinunbongbyeo, Unjangbyeo, Nonganbyeo and Dongjinbyeo had poorer, in two times.mes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.104-115
• /
• 1992

The rice culture techniques included 'Jodosukyungbeob'(旱稻水耕法 : culture techniques of early-ripening paddy rice), 'Mandosukyungbeob' (晩稻水耕法) : culture techniques of late-Ripening paddy rice 'Handobeob'(旱稻＆lt;山稻＆gt;法 : culture techniques of upland rice), 'Myojongbeob'(苗種法 : culture techniques of paddy rice by transplanting), 'Kunangbeob'(乾秧法 : culture techniques of rice by transplanting which rears seeding in dry paddy) and 'Sudogunpanongbeob'(水稻乾播農法 : culture techniques of paddy rice seeding in dry field). Especially, 'Kunangbeob' and 'Sudogunpanongbeob' were originally developed in Korea as seen in 1600s(Kyoungje : 經濟) and early 1800s (Yoji : 要旨). In 'Jodosukyungbeob' it took 9 days for seed dipping, water-sprouting and prevent damage by birds, each for 3 days in China, but in Korea seed dipping in water took 3 days and the rest of the procedures were flexibly established. In matured soils, practices were fall plowing right after harvest, recognition of effective tillering and additional fertilization use of human manure, and stimulation of sprouting by lime application. The unique culture techniques adequate for Korean situations were practiced, which included weed control after draining accurately for 3 to 4 times, draining at mid season for improving wind and drought tolerance, rice harvesting at appropriate time for preventing grain shattering, and seeding in rows. 'Mandosukyungbeob' was improved techniques contrast to those of China, and the major contents were selection of proper varieties, good stand establishment by seeding high rates, induction of vigorous tillers, and adoption of 'Jokjongbeob'(足種法 : seeding method by foot). Also, one of the most prominent rice cultures by our ancestors was 'Kunpanongbeob' that was systemized form habitual practice of Pyongan Province. The unique technique actualized was 'Hando [旱稻(山稻)]' culture technique which was the combinations of 'Jokjongbeob', root stimulation method, and disaster-tolerant mixture cropping with adoptation of variety theory, although it was originated from China. The transplanting techniques has come before 'Jikseol'($\ulcorner$直說$\lrcorner$) and its merits were sufficiently realized. However, this method was basically prohibited from the early Chosun dynasty because extremely bad harvest was expected under drought conditions and insufficient conditions of water storage. But, it was permitted in the areas that contained water all the times and in case of large-scale farming especially. Most of rice culture was transplanted in the end of the Chosun dynasty because transplanting was continuously spreaded in the three southern provinces of Korea. Under these circumstances, transplanting technique was improved from the early to the end of the Chosun dynasty by weed control, fertilizing, water management, and quadratic transplanting. Based on these techniques, agricultural productivity was improved 5 times by that time. 'Kunpanongbeob' was created and developed properly for Korean conditions that is dry in early season and flooding in late season. This was successively developed and established into transplanting technique of nursery seedling.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.43-60
• /
• 1968

In order to find the effects of nitrogen type (ammonium sulfate and urea fertilizer) and fertilized depth, (0~10cm, 0cm, 5~10cm, 10~15cm, 15~20cm, and 20cm below) on leaching and absorption of nitrogen in paddy soil, and growth and yields of rice, the pot culture experiment was carried out, using the variety Jaekun, one of the Korean leading variety. Experimental results were Summarized as follows: 1. No variations of the pH of percolating water were induced by the differences of nitrogen types and their fertilized depth (Table. 2). 2. The leaching of nitrogen was less in ammonium sulfate and top soil fertilizing plots than in urea and subsoil fertilizing plot, and the growth of rice in early stage was more promoted in ammonium sulfate and topsoil fertilizing plots (Table. 1, 7 and 8). 3. Leachng of nitrogen through the percolating water almost came to an end at the most numerous tiller stage (Table 1). 4. The absorption of nitrogen of each part of the rice plant in the harvesting stage correlated closely with the yields of each part (Table 5, 6, 9 and 10) and the leaching of nitrogen in the early stage was inversely proportion to the absorption of nitrogen of rice plant in the harvesting time (Table 1, 5, 6, 9 and 10). 5. The number of spikes was more numerous in ammonium sulfate plots than in urea plots on an average, so that the yields were higher in the ammonium sulfate plots than in urea plots although no differences in the grain number per spike were found in above two plots. The number of spikes was more numerous in topsoil fertilizing plots than in subsoil fertilizing plots, but the grain number per spike was less in former than in latter, so that no difference in yields was found. The absorption of nitrogen correlated closely with the yields in complete paddy grains (Table 5, 9, and 10). 6. At the ammonium sulfate fertilizing plots, the number of spikes was more numerous in topsoil fertilizing plots than in subsoil fertilizing plots, (among the each of the topsoil plots, 0~10cm and 5~10cm fertilizing plots kept more spikes than the 0cm fertilizing plots), but the grain number per spike was less in former than in latter (among the each of topsoil plots, no differences were found), so that no significant difference in yields was showed between the topsoil and subsoil fertilizing plots, but the results showed the tendency that the yields were highest in 0~10cm plots and the lowest in 20cm below plots. At the urea fertilizing plots, the number of spikes decreased in proportion to the increasing of fertilized depth, but no variations were found in the grain number per spike, so that the yields decreased in proportion to the increasing of fertilized depth. The absorption of nitrogen correlated closely with the yields in complete paddy grains (Table 5, 6, 9, and 10). 7. When fertilized in topsoil, the number of spikes was more numerous in ammonium sulfate plot than in urea plot, but the grain number per spike variated reversely, so that no differences were found in the yields between the ammonium sulfate and the urea plots, when fertilized in subsoil, both the number of spikes and the grain number per spike were larger in ammonium sulfate than in urea plot, so that the yields were also higher in ammonium sulfate plots (Table 5, 6, 9 and 10). 8. The weight of straw and its nitrogen absorption were higher in ammonium sulfate plot than in urea plot and decreased in proportion to the increasing of fertilized depth. Among the each of topsoil fertilizing plots, the 0~10cm and the 5~10cm fertilizing plots excelled the 0cm plot (Table 5, 6, 9 and 10). 9. No significant variations in the fertilizer treatments were found in the characters of heading date, maturing date, length of culm, length of spike, weight of empty grain, 1,000 grain weight, and one liter weight.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.127-134
• /
• 2012

Microwave remote sensing can help monitor the land surface water cycle, crop growth and soil moisture. A ground-based polarimetric scatterometer has an advantage for continuous crop using multi-polarization and multi-frequencies and various incident angles have been used extensively in a frequency range expanding from L-band to Ka-band. In this study, we analyzed the relationships between L-, C- and X-band signatures and soil moisture content over the whole soybean growth period. Polarimetric backscatter data at L-, C- and X-bands were acquired every 10 minutes. L-band backscattering coefficients were higher than those observed using C- or X-band over the period. Backscattering coefficients for all frequencies and polarizations increased until Day Of Year (DOY) 271 and then decreased until harvesting stage (DOY 294). Time serious of soil moisture content was not a corresponding with backscattering over the whole growth stage, although it increased relatively until early August (R2, DOY 224). We conducted the relationship between the backscattering coefficients of each band and soil moisture content. Backscattering coefficients for all frequencies were not correlated with soil moisture content when considered over the entire stage ($r{\leq}0.50$). However, we found that L-band HH polarization was correlated with soil moisture content (r=0.90) when Leaf Area Index (LAI)<2. Retrieval equations were developed for estimating soil moisture content using L-band HH polarization. Relation between L-HH and soil moisture shows exponential pattern and highly related with soil moisture content ($R^2=0.92$). Results from this study show that backscattering coefficients of radar scatterometer appear effective to estimate soil moisture content.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.374-383
• /
• 2010

Microwave radar can penetrate cloud cover regardless of weather conditions and can be used day and night. Especially a ground-based polarimetric scatterometer has advantages of monitoring crop conditions continuously with full polarization and different frequencies. Kim et al. (2009) have measured backscattering coefficients of paddy rice using L-, C-, X-band scatterometer system with full polarization and various angles during the rice growth period and have revealed the necessity of near-continuous automatic measurement to eliminate the difficulties, inaccuracy and sparseness of data acquisitions arising from manual operation of the system. In this study, we constructed an X-band automatic scatterometer system, analyzed scattering characteristics of paddy rice from X-band scatterometer data and estimated rice growth parameter using backscattering coefficients in X-band. The system was installed inside a shelter in an experimental paddy field at the National Academy of Agricultural Science (NAAS) before rice transplanting. The scatterometer system consists of X-band antennas, HP8720D vector network analyzer, RF cables and personal computer that controls frequency, polarization and data storage. This system using automatically measures fully-polarimetric backscattering coefficients of rice crop every 10 minutes. The backscattering coefficients were calculated from the measured data at a fixed incidence angle of $45^{\circ}$ and with full polarization (HH, VV, HV, VH) by applying the radar equation and compared with rice growth data such as plant height, stem number, fresh dry weight and Leaf Area Index (LAI) that were collected at the same time of each rice growth parameter. We examined the temporal behaviour of the backscattering coefficients of the rice crop at X-band during rice growth period. The HH-, VV-polarization backscattering coefficients steadily increased toward panicle initiation stage, thereafter decreased and again increased in early-September. We analyzed the relationships between backscattering coefficients in X-band and plant parameters and predicted the rice growth parameters using backscattering coefficients. It was confirmed that X-band is sensitive to grain maturity at near harvesting season.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.119-138
• /
• 2016

Since the Industrial Revolution, which made the mass production and mass distribution of standardized goods possible, machine-made (manufactured) products have accounted for the majority of the market. However, in recent years, the phenomenon of purchasing even more expensive handmade products has become a noticeable trend as consumers have started to acknowledge the value of handmade products, such as the craftsman's commitment, belief in their quality and scarcity, and the sense of self-esteem from having them,. Consumer interest in these handmade products has shown explosive growth and has been coupled with the recent development of three-dimensional (3D) printing technologies. Etsy.com is the world's largest online handmade platform. It is no different from any other online platform; it provides an online market where buyers and sellers virtually meet to share information and transact business. However, Etsy.com is different in that shops within this platform only deal with handmade products in a variety of categories, ranging from jewelry to toys. Since its establishment in 2005, despite being limited to handmade products, Etsy.com has enjoyed rapid growth in membership, transaction volume, and revenue. Most recently in April 2015, it raised funds through an initial public offering (IPO) of more than 1.8 billion USD, which demonstrates the huge potential of online handmade platforms. After the success of Etsy.com, various types of online handmade platforms such as Handmade at Amazon, ArtFire, DaWanda, and Craft is ART have emerged and are now competing with each other, at the same time, which has increased the size of the market. According to Deloitte's 2015 holiday survey on which types of gifts the respondents plan to buy during the holiday season, about 16% of U.S. consumers chose "homemade or craft items (e.g., Etsy purchase)," which was the same rate as those for the computer game and shoes categories. This indicates that consumer interests in online handmade platforms will continue to rise in the future. However, this high interest in the market for handmade products and their platforms has not yet led to academic research. Most extant studies have only focused on machine-made products and intelligent services for them. This indicates a lack of studies on handmade products and their intelligent services on virtual platforms. Therefore, this study used signaling theory and prior research on the effects of sellers' characteristics on their performance (e.g., total sales and price premiums) in the buyer-seller relationship to identify the key influencing e-Image factors (e.g., reputation, size, information sharing, and length of relationship). Then, their impacts on the performance of shops within the online handmade platform were empirically examined; the dataset was collected from Etsy.com through the application of web harvesting technology. The results from the structural equation modeling revealed that the reputation, size, and information sharing have significant effects on the total sales, while the reputation and length of relationship influence price premiums. This study extended the online platform research into online handmade platform research by identifying key influencing e-Image factors on within-platform shop's total sales and price premiums based on signaling theory and then performed a statistical investigation. These findings are expected to be a stepping stone for future studies on intelligent online handmade services as well as handmade products themselves. Furthermore, the findings of the study provide online handmade platform operators with practical guidelines on how to implement intelligent online handmade services. They should also help shop managers build their marketing strategies in a more specific and effective manner by suggesting key influencing e-Image factors. The results of this study should contribute to the vitalization of intelligent online handmade services by providing clues on how to maximize within-platform shops' total sales and price premiums.