• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.11-17
• /
• 2002

This paper is concerned with the development of a new method for making, separating ice and storage floated ice by installing an evaporation plate at under-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating an ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. Developed new harvest-type method shows good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, however these components are not necessary in a new method. In this study ice storage systems are experimentally investigated to study the charge and discharge of thermal energy. The results show the applicable possibility and performance enhancement of a new type.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.12-20
• /
• 2016

Purpose: Pepper prices have risen continuously because of a decrease in cultivation area; therefore, mechanical harvesting systems for peppers should be developed to reduce cost, time, and labor during harvest. In this study, a screw type picking head for a self-propelled pepper harvester was developed, and the optimal working conditions were evaluated considering helix types, winding directions of helix, and rotational speeds of the helix. Methods: The screw type was selected for the picking head after analyzing previous studies, and the device consisted of helices and a feed chain mechanism for conveying pepper branches. A double helix and a triple helix were manufactured, and rotational speeds of 200, 300, and 400 rpm were tested. The device was controlled by a variable speed (VS) motor and an inverter. Both the forward and reverse directions were tested for the winding and rotating directions of the helix. An experiment crop (cultivar: Longgreenmat) was cultivated in a plastic greenhouse. The test results were analyzed using the SAS program with ANOVA to examine the relationship between each factor and the performance of the picking head. Results: The results of the double and triple helix tests in the reverse direction showed gross harvest efficiency levels of 60-95%, mechanical damage rates of 8-20%, and net marketable portion rates of 50-80%. The dividing ratio was highest at a rotational speed of 400 rpm. Gross harvest efficiency was influenced by the types of helix and rotational speed. Net marketable portion was influenced by rotational speed but not influenced by the type of helix. Mechanical damage was not influenced by the type of helix or rotational speed. Conclusions: Best gross harvest efficiency was obtained at a rotational speed of 400 rpm; however, operating the device at that speed resulted in vibration, which should be reduced.

• Ceramist
• /
• v.22 no.3
• /
• pp.218-229
• /
• 2019

The development of highly efficient thermally activated delayed fluorescence (TADF) materials is an active area of recent research in organic light emitting diodes (OLEDs) since the first report by Chihaya Adachi in 2011. Traditional fluorescent materials can harvest only singlet excitons, leading to the theoretically highest external quantum efficiency (EQE) of 5% with considering about 20% light out-coupling efficiency in the device. On the other hand, TADF materials can harvest both singlet and triplet excitons through reverse intersystem crossing (RISC) from triplet to singlet excited states. It could provide 100% internal quantum efficiencies (IQE), resulting in comparable high EQE to traditional rare-metal complexes (phosphorescent materials). Thanks to a lot of efforts in this field, many highly efficient TADF materials have been developed. This review focused on recent molecular design concept and optoelectronic properties of TADF materials for high efficiency and long lifetime OLED application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.97-102
• /
• 2000

This experiment was conducted to investigate the changes of harvest index and the relationship between harvest index and yield determination factors by different planting times in the determinate soybean cultivars, Shinpaldal and Danbaeg. Optimum planting were 23 May in 1995 and 1996. Late planting were 13 June in 1995 and 6 June in 1996. Growth period from planting to physiological maturity (R7) was shortened as planting time was delayed in two cultivars due to shortening of reproductive growth period in Shinpaldal, and of vegetative growth period in Danbaeg. Stem weight was distinctly decreased in late planting compared to optimum planting, but seed weight of both cultivars was not different between planting times. Also, seed number per pod and harvest index were significantly increased in late planting and the high correlation was found between two factors. It was suggested that increase of harvest index in late planting would be related with high assimilate use efficiency due to increase of sink capacity. The results of correlation and principal component analysis for yield determination factors showed that main factor on yield determination was pod number per plant at R5 stage associated with dry matter accumulation during early reproductive growth period, seed number per pod and harvest index were the second factor, and one hundred seed weight was the third factor. The result of this experiment indicated that yield determination in soy-bean was dependent mainly on pod number per plant related to dry matter accumulation by early reproductive growth period, and the increase of seed number per pod and harvest index could compensate for yield decrease by shortening of vegetative growth period in late planting. Such result suggests that optimum planting date can be delayed from mid May to early June in improved soybean cultivars in Korea.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.268-273
• /
• 2001

A fundamental study on the harvest-type ice storage system applied ice making method in-water and its temperature characteristics in ice storage system was performed experimentally of the charge and discharge of cold. This paper is concerned with the development of a new method for making and separating ice and saving floated ice by installing an evaporation plate at in-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating a formed ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. A new harvest-type method shows very good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, but these components are not necessary in a new method. In this study two kinds of ice storage systems are experimentally investigated to study the thermal characteristics of ice storage tanks.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.157-160
• /
• 2002

This study was carried out to the harvesting efficiency of equipment used fer harvesting of rhizomes of Saururus chinensis Bail. Labor-saving efficiency showed 60-67% enhancement by using tillage operations with power tiller, digger attached to power tiller, and digger attached to tractor compared with manual harvest. Loss percentage of rhizomes by harvesting equipments was 2.2-8.8% lower than by manual harvest. Fresh rhizome yield and income index were increased 3-10% and 13-27% respectively by harvesting equipments, showing the highest yield and index in digger attached to tractor, Thus, digger attached to tractor showed the most effective harvest equipment for Saururus chinensis rhizome.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.629-643
• /
• 2023

The purpose of this study was to examine the effectiveness and efficiency of a policy by comparing and analyzing the impact of the rice market isolation system and production adjustment system (strategic crops direct payment system that induces the cultivation of other crops instead of rice) on rice supply, rice price, and government's financial expenditure. To achieve this purpose, a rice supply and demand forecasting and policy simulation model was developed in this study using a partial equilibrium model limited to a single item (rice), a dynamic equation model system, and a structural equation system that reflects the casual relationship between variables with economic theory. The rice policy analysis model used a recursive model and not a simultaneous equation model. The policy is distinct from that of previous studies, in which changes in government's policy affected the price of rice during harvest and the lean season before the next harvest, and price changes affected the supply and demand of rice according to the modeling, that is, a more specific policy effect analysis. The analysis showed that the market isolation system increased government's financial expenditure compared to the production adjustment system, suggesting low policy financial efficiency, low policy effectiveness on target, and increased harvest price. In particular, the market isolation system temporarily increased the price during harvest season but decreased the price during the lean season due to an increase in ending stock caused by increased production and government stock. Therefore, a decrease in price during the lean season may decrease annual farm-gate prices, and the reverse seasonal amplitude is expected to intensify.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.63-69
• /
• 1996

The experiment was conducted to reduce the labor and production cost with the labor save of harvest in cultivating the onion using the machine and the results are as follows. On labor saving effect in transparent vinyl mulching, digging working hours per 10a in the case of using tractor are 55 min., fixing + turning time is 11 min.,the time of harvest is 66 min, digging working hours using cultivator are 90 min. and fixing + turning time is 9 min., but the time of hand harvesting is 693 min and 41 sec. and in digging labor saving effect, tractor shows 90% in the harvesting period and harvest by cultivator 86%. On nonmulching cases, the harvest by tractor takes 44 min. and that by cultivator does 75 min, and digging labor saving effect shows 93.6% in the tractor harvest and 89% in the cultivator harvest. Therefore, on the operation efficiency per hour, in the case of tractor with digger vinyl mulching and nonmulching show $0.091\sim0.136ha$ and in the case of cultivator with digger-both show $0.061\sim0.08ha$, but in the case of hand harvest, vinyl mulching and nonmulching are $0.008\sim0.009ha$, so in the mechanized harvest of onion, the harvest by tractor with digger is the best. On the cost and labor save for harvesting the onion with labor saving effect, tractor shows 19 hours and 26min./10a in vinyl mulching and 18 hours and 54min./10a in nonmulching, so it shows the short hours for harvesting. And labor saving effect shows 37% in comparison with 29 hours and 49 min. $\sim30$ hours and 38 min.($110,587\sim113,925won$) of the hand harvest, so the cost was reduced to $69,525\sim72,225won$. On the cultivator with diggers, vinyl mulching takes 19 hours and 49 min and nonmulching 20 hours and 2 min., so the labor saving effect and cost were reduced to $32\sim36%$($73,087\sim75,075$ won) in comparison with the hand harvest.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.283-295
• /
• 2021

For the last decades, a research hotspot for the halide perovskites (HPs) is now showing great progress in terms of improving efficiency for numerous photovoltaic devices (PVDs). However, it still faces challenges in the case of long-term stability in the air atmosphere. Defect-free high-quality HP single crystals show their promising properties for the remarkable development of highly efficient and stable PVDs. Here, we summarize the growth processing routes for the stable HP single crystals as well as briefly discuss the pros and cons of those well-established synthesis routes. Furthermore, we briefly include the comparison note between the HP single crystals and polycrystalline perovskite films regarding their device applications. Based on the future progress, the review concludes subjective perspectives and current challenges for the development of HPs high-quality PVDs.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.297-302
• /
• 1995

The experiment is conducted to reduce the labor and production cost with the labor save of harvest if cultivating the potatoes using the machine and the results are as follows. On labor saving effect in transparent vinyl mulching, digging working hours per 10a in the case of using tractor are 60 min., fixing + turning time is 5 min. and 30sec., the time of harvest is 65 min and 30sec., digging working hours using cultivator are 99 min. and fixing +turning time is 5 min. and 30sec., but the time of hand harvesting is 990 min. and in digging labor saving effect, tractor shows 94% in the harvesting period and harvest by cultivator 90%. On non mulching cases, the harvest by tractor takes 49 min. and 30 sec. and that by cultivator does 87 min. and 30 sec., and digging labor saving effect shows 94% in the tractor harvest and 90% in the cultivator harvest. Therefore, on the operation efficiency per hour, in the case of tractor with digger vinyl mulching and non mulching show, $0.091\sim0.121ha$ and in the case of cultivator with digger both show $0.057\sim0.069ha$, so in the mechanized harvest of potatoes, the harvest by tractor with digger is the best. On the cost and labor save for harvesting the potatoes with labor saving effect, tractor shows 19 hours and 20 min./10a in vinyl mulching and 19 hours. and 54 min./10a in non mulching, so it shows the short hours for harvesting. And labor saving effect shows $42\sim45%$ in comparison with 35 hours and 21 min. $\sim35$ hours and 23 min.($123,113\sim130,613$ won) of the hand harvest, so the cost was reduced to $71,250\sim72,225$ won. On the cultivator with diggers, vinyl mulching takes 19 hours and 55 min. and non mulching 19 hours and 38 min., so the labor saving effect and cost were reduced to $14\sim44%$ ($72,675\sim73,313$ won) in comparison with the hand harvest.