• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.909-914
• /
• 2002

In this thesis, noise reduction of image with impulse noise in circle image removed noise to harness existing median filter for noise reduction from image data of damage by noise when impulse noise is high or noise reduction is low, but it is not made up of noise reduction to harness existing median filter in case of existence of non-impulse noise. Therefore noise reduction of image with non-impulse noise had to remove noise by morphological arithmetic in this thesis's proposition. In contrast to median filtering, result of edge detection is more efficient after remove non-impulse noise by method of thesis's proposition and it compare and demonstrate through this experimentation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.83-94
• /
• 1993

Design and production of wiring for automobile systems provide the background for the development of concurrent engineering framwork. Key issues include with different parts of the wiring design process and the development of hierarchical representations that capture the different characteristics(e.g., connectivity, geometry) of the harnesses. The abstraction of design information results in features, while the abstraction of operations leads to the development of agents. These abstracts are essential for efficient transactions among people and computer tools in a domain that involves numerous interacting constraints. We have decomposed the wiring design process into four basic categories of tasks that are each addressed by an "agent" : the Environment Editor(EE), the Free Space Manager(FSM), the Wiring Editor(WE), and the Part Selector(PS). In this paper the strategy for the problem decomposition, the definition of features, and the ways in which features are used by various agents, are discussed. We conclude with a discussion of some of the issues raised by the project and the steps underway to address them.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.142-150
• /
• 2008

In order to ensure the individual and mutual performances among the telemetry system, tracking system, flight termination system, GPS, and inertial navigation & guidance system which are installed in the KSLV-I 2nd stage and ground equipment of the Naro space center, flight test using a light airplane is required. Since the high degree of test efficiency is fulfilled through the minute plan and analysis about selection of the equipment which are applicable to the test, harness, operation strategy, and antenna installation. KSLV-I communication environment and flight profile should be precisely taken into account during the flight test. In this document, overall aspect of the KSLV-I 2nd stage equipment specification, a rack for the installation, harness, the airplane specification, and flight route which are required for the effective flight test are presented.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.295-296
• /
• 2019

본 논문은 항공기내의 주요 항공전기 전자 부분품을 연결하여 주는 배선조립체의 연속성을 시험할 수 있는 점검기의 개발에 관한 것이다. 기존의 항공기 내의 배선조립체의 연속성 시험은 디지털 멀티미터의 저항점검 기능을 통해 이루어지고 있었으나, 측정된 저항값이 정상인지 비정상인지의 판단은 정비사의 경험에 의한 판단에 의존할 수밖에 없는 문제가 있다. 제안한 점검기는 정비사가 예상되는 배선의 AWG 규격 및 길이를 입력하면 배선조립체의 AWG 규격별, 길이별 SPEC'의 저항값을 계산하여 측정된 저항값이 정상인지 비정상인지 확인할 수있는 메시지를 시현하게 하여 정비사의 정비 부담을 줄여줄 수 있다. 또한 본 시스템은 오픈소스를 이용하여 저비용으로 제작가능하게 하여 많은 정비사들이 사용할 수 있도록 하는 장점이 있다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.47-57
• /
• 2016

In this paper, we measured human body signals in order to verify a active harness system that we developed for gait and balance training. The experimental procedure was validated by tests with 20 healthy male subjects. They conducted motions of Activities of Daily Living(ADL)(Normal Walking, Stand-to-Sit, Sit-to-Stand, Stair Walking Up, and Stair Walking Down) according to body weight support rates (0%, 30%, 50% of subjects' body weight). The effectiveness of the active harness system is verified by using the results of foot pressure distribution. In normal walking, the decrease of fore-foot pressure, lateral soleus muscle and biceps femoris muscle were remarkable. The result of stand-to-sit results motion indicated that the rear-foot pressure and tibialis anterior muscle activities exceptionally decreased according to body weight support. The stair walking down show the marked drop of fore-foot pressure and rectus femoris muscle activities. The sit-to-stand and stair walking up activities were inadequate about the effect of body weight support because the velocity of body weight support system was slower than male's activity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.219-228
• /
• 2001

Objective : For the purpose of preparing the fundamental data and health promotion and control program on organic solvents in air of manufacturing industry. Methods : The author surveyed number of organic solvent components which was used in working site and also determined the organic solvents concentration in air of 927 manufacturing industries and 1,267 working process with gas chromatography(NIOSH manual) for five years from 1995 to 1999. Results : Mean number of solvents components by type of industry, working process was number of 12. There were exceeded to TLV of 1,2-dichloroethane in textile manufacturing industry N,N-dimethyl furan in tanning and dressing of leather ; luggage, handbags, saddlery, harness and footwear manufacturing industry and chemical and chemical product manufacturing industry by type of industry. There were exceeded to TLV of 1,2-dichloroethane in handwriting and drawing process, cellosolve in adhesive spreading process, N,N-dimethly furan in production of solvent process and adhesion process by working process Total exceeded rate to threshold limit values of organic solvents mixture were 12.9% for EI(Exposure index) and 10.0% for Em(Estimation of mixture) by type of industry, 11.3% for EI and 8.2% for Em by type of working process. The highest exceed rate was 36.7% for EI in tanning and dressing of leather ; luggage handbags, saddlery, harness and footwear manufacturing industry and 29.0% for Em in textile manufacturing industry. The highest exceeded rate was 23.1% for EI and 12.5% for Em in adhesive spreading process by working process. Mean values of total subjects by type of industry and type of working process were $0.7{\pm}1.8$ for EI and $0.7{\pm}1.7$ for Em respectively. Conclusions : As above results, the author suggest that it makes the environmental control program on 1.2-dichloroethane, N,N-dimethyl furan, cellosolve by kind of organic solvent and on textile manufacturing industry, tanning and dressing of leather ; luggage, handbags, saddlery harness and footwear manufacturing industry by type of industry, and on handwriting, drawing process and adhesive spreading process and adhesion process by type of working process.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.4-17
• /
• 2021

This study analyzed 19 samples of harness fittings and pendants, which were excavated in Tomb No. 15 in Songhyeon-dong, Changnyeong. Harness fittings and pendants are used for ostentation, rather than practicality, and were excavated from ancient tombs in Gaya culture. So, they are considered artifacts that compare the production techniques and raw materials. This study aimed to examine the production techniques and provenience studies of Bihwa Gaya, which is estimated to be from the 5th to 6th centuries. According to the research, harness fittings were made of pure copper and were gilded with Au·Ag alloys on their surfaces. Hg was detected together and plated with a mercury amalgam method. As a result of the pendant (fish scales-pattern, oval and fish-tail shape), analysis showed that Fe in the background metal, Cu in the middle layer, and Au and Ag on the surface were the main components. The method of adhesion between Cu and Au·Ag gilded layers are plated by a mercury amalgamation method. So, it was identified by the gilt-iron·gold·bronze technique. Since the pendant (heart shaped) is found to be the main component of Fe in the background metal and Ag in the surface layer, the metal was made gilt-iron·silver technique. The background metal and gilding were additionally fixed using a rivet. The raw materials of 3 harnesses excavated from Changnyeong are plotted in zone 2 in the southern Korean Peninsula. And 16 harnesses were plotted in Chinese copper ore by Mabuchi Hishao in the Chinese Peninsula.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1613-1616
• /
• 2003

We will take a multitude EJB Design Patterns that you can harness to enhance your EJB Project today In this paper, we propose the EJB Based Entity Bean DBMS connecting system. Generally, EJB Based Entity Beans are respectively connected by DBMS. Therefore, for the this problems we suggest that Abstract Factory pattern uses DBMS connecting of Entity Beans. As a result, we evaluate MIF and CF in every class relationship.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.74-78
• /
• 2001

In this study, out-of-plane properties and CTEs were predicted for 8-harness satin weave textile composites. The properties were calculated by unit cell analysis for configurations with varied waviness ratio and phase shifts. Macro elements were employed to reduce the computer resource requirement. It was found that the out-of-plane properties and CTEs were varied as the phase shift changed. However the dependency was much weaker than the in-plane properties.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.88-91
• /
• 2008

The COMS IMPS (Communication Ocean and Meteorological Satellite IMage Pre-processing Subsystem) is developed for image pre-processing of COMS. For a test of the COMS IMPS, 7 support software are developed in KARI GS using simulated MI/GOCI WB (Wide-Band) data; COMS Fill Adder, MI (Meteorological Imager) CADU generator, GOCI (Geostationary Ocean Colour Imager) CADU generator, COMS CADU combiner, MI SD (Sensor Data) analyzer, GOCI SD analyzer, and COMS DM (Decomposition Module) test harness. This paper explains functions of developed support software and the COMS IMPS test using those software.