• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.2
• /
• pp.41-45
• /
• 2013

Extractives of garlic (Allium scorodorpasum) and green pepper (Capsicum annuum L.) were used to prevent and exterminate rice weevils which contaminate stored rice. The extractives exhibited great efficacy against Sitophilus oryzae and Tribolium castaneum by annihilating all the weevils contained in a bottle. Furthermore, kraft paper coated by 5% extractives also displayed good effectiveness against the rice weevils. When rice weevils were stored with rice in a sack made of extractives-coated kraft paper, the number of living insects was sharply decreased according to elapsed time. In particular, 1,4-benzoquinone, which is very harmful to human, was detected from rice contaminated by Sitophilus oryzae and Tribolium castaneum through the analysis of GC/MS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.285-285
• /
• 2010

Zinc oxide (ZnO) is a direct band gap semiconductor with 3.37 eV, which has in a hexagonal wurtzite structure. ZnO is a good candidate for a photocatalyst because it has physical and chemical stability, high oxidative properties, and absorbs of ultraviolet light. During ZnO is irradiated by UV light, redox (reduction and oxidation) reactions will occur on the ZnO surface, generating the radicals O2- and OH. These two powerful oxidizing agents have been proven to be effective in decomposition of harmful organic materials, converting them into CO2 and H2O. Therefore, we assume that oxygen on the surface of ZnO is a very important factor in the photocatalytic activities of ZnO nanoparticles. Recently, ZnO nanoparticles are studied in various application fields by many researchers. Photocatalyst research is progressing much in various application fields. But the ZnO nanoparticles have disadvantage that is unstable in water in comparison titanium dioxide (TiO2). The Zn(OH)2 was formed at the ZnO surface and ZnO become inactive as a photocatalyst when ZnO is present in the solution. Therefore, we prepared synthesized ZnO nanoaprticles that were immersed in the water and dried in the oven. After that, we measured photocatalytic activities of prepared samples and find the cause of their phtocatalytic activity changes. The characterization of ZnO nanoparticles were analyzed by Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and BET test. Also we defined the photocatalytic activity of ZnO nanoparticles using UV-VIS Spectroscopy. And we explained changing of photocatalytic activity after the water treatment using X-ray Photoelectron Spectroscopy (XPS).

• Journal of Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.215-220
• /
• 2007

One of the important functions of skin is protection from harmful environments. Many studies have explored how to prevent skin from wrinkling and the occurrence of pigmentation changes. Skin wrinkling and pigmentation changes could be caused by unusual disruption of connective tissue, the formation of free radicals and ultraviolet radiation. In this study, extracts obtained from 254 different kinds of Jeju medicinal plants were screened for inhibitory effects on tyrosinase and elastase, and for free radical scavenging effects. Four herbs, Phormium tenax, Morus bombycis, Morus alba, and Cudrania tricuspidata, were potent inhibitors of tyrosinase ($IC_{50}$ values 4.62, 5.46, 8.17, and 64.17 ${\mu}g$/mL, respectively). Aleurites fordii [$IC_{50}$: 5.29 ${\mu}g$/mL, 1,1-diphenyl-2-picrylhydrazyl (DPPH)], Distylium racemosum ($IC_{50}$: 6.14 ${\mu}g$/mL), Acer palmatum ($IC_{50}$: 5.44 ${\mu}g$/mL), and Spiraea salicifolia ($IC_{50}$: 5.25 ${\mu}g$/mL) showed good antioxidative effects. Furthermore, Distylium racemosum ($IC_{50}$: 7.51 ${\mu}g$/mL), Diospyros kaki ($IC_{50}$: 15.1 ${\mu}g$/mL), Cornus macrophylla ($IC_{50}:$ 16.59 ${\mu}g$/mL), and Psidium guajava ($IC_{50}$: 40.25 ${\mu}g$/mL) exhibited potent inhibitory effects on elastase. These results suggest that medicinal plants possessing several biological activities may be potent inhibitors of the processes involved in pigmentation increases and aging. Further investigations will focus on in vivo assays and on the chemical identification of the major active components responsible for whitening and anti-aging activity in the screened efficacious extracts.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.4 s.193
• /
• pp.138-146
• /
• 2007

Some biodegradable polymers and other materials such as hydrogels have shown the promising potential for surgical applications. Post surgical adhesion caused by the natural consequence of surgical wound healing results in repeated surgery and harmful effects. Recently, scientists have developed absorbable anti-adhesion barriers that can protect a tissue from adhesion in case they are in use; however, they are dissolved when no longer needed. Although these approaches have been attempted to fulfill the criteria for adhesion prevention, none can perfectly prevent adhesions in all situations. Overall, we developed a new method to fabricate an anti-adhesion membrane using biodegradable polymer and hydrogel. It employed a highly accurate three-dimensional positioning system with pressure-controlled syringe to deposit biopolymer solution. The pressure-activated microsyringe was equipped with fine-bore nozzles of various inner-diameters. This process allowed that inner and outer shapes could be controlled arbitrarily when it was applied to a surgical region with arbitrary shapes. In order to fulfill the properties of the ideal barriers f3r preventing postoperative adhesion, we adopted the pre-mentioned method combined with surface modification with the hydrogel coating by which anti-adhesion property was improved.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.3
• /
• pp.175-194
• /
• 1979

The soil organic matter contents in arable land are generally low in Korea. Thus it is generally agreed that the application of organic materials to soils would be much beneficial. Present paper is a review on the effectiveness of organic mat ter application in uplands and lowlands. 1. The effect of organic matter application in uplands are of more clear and simple to explain as compared to that in lowlands. In uplands, appropriate application of organic matters such as compost and various crops residues improves the physical properties of soils leasing to increased water holding capacity, better aeration, and decrease in soil erosion. 2. In lowland, rice soils under water logged conditions the effect of organic matter application on rice yield is not straight borward and demands more refined knowledges for the interpretation of it. 3. It is found that the application of compost in rice soils is more effective when nitrogen fertilizer application is limited it dicating that nitrogen contained in the organic maerials can become available to rice plant and plays an important role for increased yield of rice under the condition where nitrogen fertilizer supply is limited. 4. Application of organic matter does not always bring about the desirable effects. Very often the organic matter application results in more intensive soil reduction leading to the accumulation of harmful substances which would can cancel out the positive effects of organic matter. This is partiunlarly true in poorly drained soils. 5. Rice straw or compost, when applied rice soils, supply sizeable amounts of available silicate to rice plant resulting in yield increase. 6. Although the effectiveness of organic matter application on rice yield in short term experiments is not consistent due to many reasons, the long term effect of organic matter is significant. 7. The term of the $O.M/SiO_2$ ratio in rice soils can serve as a criterion for the judgement of whether organic matter or silicate fertilizer is needed to be applied in a certain soil.

• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.207-216
• /
• 2004

This study was intended to investigate the characteristics of ride vibrations transmitted to tractor operator during rotary tillage and plowing operations. Seat accelerations of a 41 ps diesel tractor in rotary tillage and plowing were measured and evaluated as specified in the ISO 2631-1. Effects of working speed and tilling depth on ride vibration were investigated. The level of ride vibration was also evaluated in terms of health guidance caution zones. Some of the results of the study are as follows: 1. The level of ride vibration in plowing was about 4.3 times greater than in rotary tillage. 2. The effect of working speed in rotary tillage differs depending upon the tillage depth. The level of ride vibration was increased with the speed, but it decreased over a certain tillage depth. Fore and aft vibration was 2.2-2.7 times severer than horizontal and vertical vibrations. Dominant frequency band was 1-3.15 ㎐ in fore and aft, 1-3.15㎐ and 16-25㎐ in horizontal, and 16-25㎐ in vertical directions. 3. Plowing reduced the ride vibration by 42.8-50.2%. But its positive effect decreased as the plowing speed increased. In plowing operation, ride vibration was similar degrees in fore and aft, horizontal and vertical directions. The dominant frequency band in plowing operation was 1-2.5㎐ in fore and aft, 1-2.5㎐ in horizontal, and 1-8㎐ in vertical directions. 4. On a basis of daily work hours of 4, total level of ride vibrations in plowing operation is likely to be harmful to operator's health.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.2
• /
• pp.81-87
• /
• 2001

Populus euramericana and Betula platyphylla var. japonica have been identified as possible species for use for phytoremediation of landfills. To identify the capacity of waste leachate absorption in Populus euramericana and Betula platyphylla var, japonica, four different treatments were applied to these seedlings: leachate solution (100% leachate), 50% dilution (50% leachate: 50% water, v/v) and 25% dilution (25% leachate: 75% water, v/v) were applied to these two species. After the experiment, concentrations of heavy metals in tree biomass were analyzed by Inductively Coupled Plasma emission spectrometer (ICP). These two species can take up the hazardous parts of the leachate such as heavy metals. Especially, these species showed good absorption capacity of Al, Cr, and Fe elements. The result of this study suggested that these two species can take up the toxic materials through their roots and transport them to stems or leaves.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.2
• /
• pp.144-156
• /
• 1999

Thermal Barrier Coating with Functional Gradient Materials (FGM-TBC) can play an important role to protect the parts from harmful environments in high temperatures such as oxidation, corrosion, and wear and to improve the efficiency of aircraft engine by lowering the surface temperature on turbine blade. FGM-TBC can increase the life spans of product and improve the operating properties. Therfore, in this study the evaluations of mechanical and thermal properties of FGM-TBC such as fatigue, oxidation and wear-resistance at high temperatures have been conducted. The samples of both the TBC with 2, 3, 5 layers (YSZ/NiCrAlY) to be produced by Air Plasma Spray method (APS) and the bulk TBC with 6 layers to be produced by Plasma Assisted Sintering method (PAS) were used. Furthermore, residual stress, bond strength, and thermal conductivity were evaluated. The average thickness of the APS was 500$\mu\textrm{m}$ to 600$\mu\textrm{m}$ and the average thickness of the PAS was 3mm. The hardness number of the top layer of APS was 750 Hv to 810Hv and that of PAS was 950 Hv to 1440Hv. The $ZrO_2$ coating layer of APS was composed of tetragonal structure after spraying as the result of XRD analysis. As shown in the results of the high temperature wear test, the 3 layer coating of APS had the best wear resistance at $800^{\circ}C$ and the 5 layer coating of APS had the best wear resistance at $600^{\circ}C$. But, these coatings had the tendency of the low-temperature softening at $300^{\circ}C$. The main mechanism of wear was the adhesive wear and the friction coefficient of coatings was increased as increasing the test temperatures. A s results of thermal conductivity test, the ${\Delta}T$ of the APS coating was increased as number of layer and the range of thermal conductivity of the PAS was $800^{\circ}C$ to $1000^{\circ}C$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.1
• /
• pp.28-35
• /
• 2008

Purpose: The nitric oxide (NO) release by inducible nitric oxide synthase (iNOS) is the key events in macrophage response to lipopolysaccharide (LPS) which is suggested to be a crucial mediator for inflammatory and innate immune responses. NO is an important mediator involved in many host defense action and may also lead to a harmful host response to bacterial infection. However, given the importance of iNOS in a variety of pathophysiological conditions, control of its expression and signaling events in response to LPS has been the subject of considerable investigation. Materials and Methods: The Raw264.7 macrophage cell line was used to observe LPS-stimulated iNOS expression. The expression of iNOS is observed by Western blot analysis and real-time RT-PCR. Protein kinase C $(PKC)-{\alpha}$ overexpressing Raw264.7 cells are established to determine the involvement of $PKC-{\alpha}$ in LPS-mediated iNOS expression. $NF-{\kappa}B$ activity is measured by $I{\kappa}B{\alpha}$ degradation and $NF-{\kappa}B$ luciferase activity assay. Results: We found that various PKC isozymes regulate LPS-induced iNOS expression at the transcriptional and translational levels. The involvement of $PKC-{\alpha}$ in LPS-mediated iNOS induction was further confirmed by increased iNOS expression in $PKC-{\alpha}$ overexpressing cells. $NF-{\kappa}B$ dependent transactivation by LPS was observed and $PKC-{\alpha}$ specific inhibitory peptide abolished this activation, indicating that $NF-{\kappa}B$ activation is dependent on $PKC-{\alpha}$. Conclusion: Our data suggests that $PKC-{\alpha}$ is involved in LPS-mediated iNOS expression and that its downstream target is $NF-{\kappa}B$. Although $PKC-{\alpha}$ is a crucial mediator in the iNOS regulation, other PKC isozymes may contribute LPS-stimulated iNOS expression. This finding is needed to be elucidated in further study.

• Nuclear Engineering and Technology
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2000

Delayed hydride cracking (DHC) velocity and threshold stress intensity factor for DHC ($K_{IH}$) tests in the radial direction on M11 pressure tube material in Wolsong unit 1 were carried out following the Atomic Energy Canada Limited (AECL) standard test procedure in order to identify the effect of undercooling on DHCV and to acquire the $K_{IH}$ data. The results showed that $K_{IH}$ 's were 8.8$\pm$0.8 MPa√m in the back offcut and 11.4$\pm$0.7 MPa√m in the front offcut. The fact that $K_{IH}$ in the front offcut is about 20% higher than that in the back offcut is attributed to the microstructural difference between the materials of the front and back ends. $K_{IH}$ 's in M11 pressure tube appeared to be higher than the values from the tubes made of double melted ingot reported earlier. This can be interpreted by the fact that very small amounts of Chlorine (Cl) and Phosphorus (P) are contained in the ingot and that the content of the harmful elements in the M11 pressure tube is equivalent to that made of a quadruple melting process. DHC velocities at 25$0^{\circ}C$ in the front offcut in the radial direction are measured to be 5~8$\times$10$^{-8}$ m/s. The results show that the prior thermal history change the DHC velocity significantly. This effect was confirmed by the experiment of undercooling prior to the DHC tests.DHC tests.