• 제목/요약/키워드: hardened properties

검색결과 558건 처리시간 0.021초

Effect of fiber type and content on properties of high-strength fiber reinforced self-consolidating concrete

  • Tuan, Bui Le Anh;Tesfamariam, Mewael Gebregirogis;Hwang, Chao-Lung;Chen, Chun-Tsun;Chen, Yuan-Yuan;Lin, Kae-Long
    • Computers and Concrete
    • /
    • 제14권3호
    • /
    • pp.299-313
    • /
    • 2014
  • Effects of polypropylene (PP) fibers, steel fibers (SF) and hybrid on the properties of highstrength fiber reinforced self-consolidating concrete (HSFR-SCC) under different volume contents are investigated in this study. Comprehensive laboratory tests were conducted in order to evaluate both fresh and hardened properties of HSFR-SCC. Test results indicated that the fiber types and fiber contents greatly influenced concrete workability but it is possible to achieve self consolidating properties while adding the fiber types in concrete mixtures. Compressive strength, dynamic modulus of elasticity, and rigidity of concrete were affected by the addition as well as volume fraction of PP fibers. However, the properties of concrete were improved by the incorporation of SF. Splitting tensile and flexural strengths of concrete became increasingly less influenced by the inclusion of PP fibers and increasingly more influenced by the addition of SF. Besides, the inclusion of PP fibers resulted in the better efficiency in the improvement of toughness than SF. Furthermore, the inclusion of fibers did not have significant effect on the durability of the concrete. Results of electrical resistivity, chloride ion penetration and ultrasonic pulse velocity tests confirmed that HSFR-SCC had enough endurance against deterioration, lower chloride ion penetrability and minimum reinforcement corrosion rate.

2성분 규불화염계 혼화제가 첨가된 시멘트의 수화반응 및 수밀성 변화 (Changes in Hydration and Watertightness of Cement Containing Two-Component Fluosilicate Salt Based Chemical Admixture)

  • 김재온;남재현;김도수;길배수;이병기
    • 한국세라믹학회지
    • /
    • 제41권10호
    • /
    • pp.749-755
    • /
    • 2004
  • 불화규산($H_2SiF_6$)은 인산 혹은 불산 제조공정에서 발생되는 사불화규소($SiF_4$)의 흡수공정에 의해 수용액 상태로 회수된다. 불화규산과 금속염의 반응에 의해 생성된 규불화염을 시멘트에 첨가하면 시멘트와의 특이 수화반응에 의해 독특한 물성을 발휘된다. 본 연구에서는 상기 공정에 의해 회수된 불화규산(농도 : $25\pm2\%$)과 금속염을 반응시켜 3가지 농도($4\%,\;6\%,\;8\%$)의 2성분 규불화염계 혼화제(MZ)를 제조하고, 시멘트 중량의 동일 첨가량($C\times1.0\%$)에서 시멘트 수화반응 및 수밀성에 대해 MZ의 농도변화에 따른 효과를 관찰하였다. MZ가 첨가된 시멘트 수화과정중 $CaF_2$와 같은 난용성 금속불화물과 가수분해에 의한 가용성 실리카가 새로이 생성되었다. MZ가 첨가된 경화시멘트의 총 공극율은 난용성 금속불화물의 충전작용과 가용성 실리카의 포졸란 작용에 의해 감소되었다. 궁극적으로 시멘트와 MZ간의 특이 수화반응에 의해 MZ가 첨가된 시멘트 경화체의 수밀성이 개선되는 것으로 나타났다.

철근 부식 방식을 위한 굳지 않은/굳은 콘크리트의 전기방식 적용에 관한 연구 (The Inhibitive Effect of Electrochemical Treatment Applied to Fresh/hardened Concrete)

  • 김성욱;문재흠;안기용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권5호
    • /
    • pp.67-76
    • /
    • 2013
  • 본 연구에서는 전기방식 종류에 따른 문헌 고찰 및 굳지 않은/굳은 상태의 콘크리트에 대해 전기방식 적용 시 방식 효과와 관련하여 연구를 실시하였다. 굳은 콘크리트의 경우 우선적으로 철근의 부동태피막 파괴를 유도하기 위하여 NaCl을 혼입한 후, 2주일동안 250, 500, $750mA/m^2$의 방식전류를 통전하였다. 그 후 부동태피막 복원화와 염소 이온 추출에 대해서 정량화를 실시하였다. 동시에, 굳지 않는 상태의 콘크리트에 대해서는 굳은 상태와 동일한 양의 방식전류를 타설 직후부터 동일한 기간동안 통전하여 전기방식을 실시하였다. 후광산란(Backscattered electron; BSE) 이미지를 이용하여 철근-콘크리트 계면을 관찰하였으며, 염소이온 확산에 대해서 염소이온 이동 속도와 철근 부식 저항성에 대한 콘크리트의 성질 변화에 대해 측정하였다. 결과적으로 보면, 전기 방식은 부동태피막 복원화에 매우 효육적이며, 콘크리트 내의 염소이온 중 63-73% 정도가 추출되는 것으로 확인 되었다. 굳지 않는 상태의 콘크리트에 전기방식을 적용할 경우, 철근 표면에서 $Ca(OH)_2$ 층이 조밀하게 되어 철근 부식 저항성이 향상되었다. 다만, 방식 전류에 따라 콘크리트 표면 염화물량이 증가하는 경향이 나타나는 것을 확인 할 수 있다.

Characterization of Recycled Coarse Aggregate (RCA) via a Surface Coating Method

  • Ryou, J.S.;Lee, Y.S.
    • International Journal of Concrete Structures and Materials
    • /
    • 제8권2호
    • /
    • pp.165-172
    • /
    • 2014
  • Recycled coarse aggregate (RCA) made from waste concrete is not a suitable structural material as it has high absorption of cement mortar, which adheres on the aggregate surface and on the tiny cracks thereon. Therefore, when using RCA made from waste concrete, much water must be added with the concrete, and slump loss occurs when transporting. Hence, its workability is significantly worse than that of other materials. In this study, surface of RCA was coated with water-soluble polycarboxylate (PC) dispersant so that its characteristics improved. Each possibility was evaluated: whether its slump loss can be controlled, by measuring its workability based on the elapsed time; and whether it can be used as a structural material, by measuring its strength. Moreover, the carbonation due to cement mortar adhesion was measured through a carbonation test. As a result, RCA coated with PC dispersant was found to be better than crushed coarse aggregate and RCA when the physical properties of the fresh concrete and the mechanical, durability of the hardened concrete were tested.

Whitetopping 포장재의 시험포설 및 시공품질에 대한 평가연구 (A Study on the quality of High Early Strength Concrete as Whitetopping Materials)

  • 임채용;엄태선;유재상;이종열;엄주용;조윤호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.507-512
    • /
    • 2002
  • In road pavements, it is known that cement concrete pavement has superior durability. But in repairing pavement, cement concrete pavement is not usually applied because of the length of time while the road is interrupted when using Ordinary and Rapid-hardening Portland Cement. And Super High Early Strength Cement and Ultra Super High Early Strength Cement are not favorable for ready mixed concrete because of rapid setting time, high slump loss and other restrictions. We developed special cement developing 1 day strength of over 30.0N/$mm^2$ to open the road within 1 day and workable time is maintained over 1 hour so that it can be used as ready mixed concrete. We performed experimental overlay construction with concrete and evaluated the properties of the fresh and hardened concrete. The flexural strength was over 5.0N/$mm^2$ and the compressive strength was over 30N/$mm^2$ at 1 day. So it is thought that the road can be open to traffic within 1 day after placement.

  • PDF

포러스콘크리트의 골재입도 및 공극률에 따른 식생능력평가 (Planting-Ability Properties of Porous Concrete as Gradation and Void Ratio)

  • 윤덕열;김정환;조영수;표구영;박승범
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.243-248
    • /
    • 2002
  • As a notion of environment protection changes throughout the world, construction engineers, as part of the effort to resolve environmental problems, have been actively doing research on environmental friendly porous concrete using large and non-uniform aggregate. Porous Concrete enables water and air to pass through a firmly hardened material and allows required nutrients to reach roots of plants. The purpose of this study is to analyze planting ability when the change of aggregate gradation and void ratio. The results of an experiment from the planting ability of the porous concrete to its influence on the compressive strength are reported in this paper. As a result of the experiment, the compressive strength is higher when the gradation of aggregate is smaller, and it also goes higher when the void ratio gets smaller The planting ability of porous concrete is decided by the germination and the grass length of Indigofera pseudo-tinctoria(IPT). The length of IPT is longer when the gradation of aggregate is greater and the void ratio gets smaller.

  • PDF

Fuzzy logic model for the prediction of concrete compressive strength by incorporating green foundry sand

  • Rashid, Khuram;Rashid, Tabasam
    • Computers and Concrete
    • /
    • 제19권6호
    • /
    • pp.617-623
    • /
    • 2017
  • This work is conducted with the aim of using waste material to reserve the natural resources. The objective is accomplished by conducting experimentation and verify by modeling based on fuzzy logic. In experimentation, concrete is casted by using natural/river sand as fine aggregate and termed as control specimen. Natural sand is conserved by replacing it with used foundry sand (UFS) by an amount of 10, 20 and 30% by weight. Fresh and hardened properties of concrete are investigated at different ages. It is observed that compressive strength and modulus of elasticity reduced with the increase in amount of UFS. Furthermore, concrete compressive strength is predicted by using fuzzy logic model and verified at different replacement ratio and age with experimental observations.

A simple test method to assess slump flow and stability of self-compacting concrete

  • Bouziani, Tayeb
    • Computers and Concrete
    • /
    • 제21권2호
    • /
    • pp.111-116
    • /
    • 2018
  • Establishment of test methods to assess the fresh properties of self-compacting concrete (SCC) are required to ensure the homogeneity in fresh and hardened states. This paper discusses the suitability of a simple test method for assessing the slump flow and stability of SCC by testing on self-compacting mortar (SCM) fraction. The proposed test method aims at investigating slump flow diameter test and sieve stability test of SCC by testing SCM fraction with a plunger penetration apparatus. A central composite modeling design was performed to evaluate the effects of water/cement ratio (W/C), superplasticizer dosage (SP) and powder marble content (MP) on slump flow diameter, stability and plunger penetration test of fresh SCC. The responses of the derived statistical models are slump flow (Sf), sieve stability (S) and plunger penetration (P). Relationships obtained in this study show acceptable correlations between plunger penetration test value and slump flow diameter test results and stability. It should note that the developed relationships are very useful to predict slump flow diameter and stability of studied SCC mixtures by carrying out a simple plunger penetration test on its mortar, which can save labour and time in laboratory experiments.

장경간 PSC Beam 교량을 위한 고강도콘크리트의 개발에 관한 연구(II) (A Study on the Development of High Strength Concrete for Long Span PSC Beam Bridge(II))

  • 백상현;이형준;김기수;엄태선;정원기;황은영
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
    • /
    • pp.291-296
    • /
    • 1998
  • In the present study, the high strength concrete which is adequate for the long span PC beam above 40 meters has been developed. The optimum cement for high strength concerete was selected through laboratory tests and in-situ mock-up applications. The optical concrete mix design was performed, and the properties of fresh concrete and hardened concrete have been investigated. These results of laboratory study are analized and compared to domestic and foregn design codes and specifications. Finally, the developed high strength concrete was applied to half-scale PSC beams and showed good applicability in field conditions. It is conclude that hte developed high strength concrete can be applied to civil and architectural structures in the field applications.

  • PDF

폐주물사를 콘크리트용 잔골재로 재활용하기 위한 기초연구 (Fundamental Study on Recycling Waste Foundry Sand as Fine Aggregate for Concrete)

  • 문한영;최연왕;송용규;신동구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.281-286
    • /
    • 2001
  • The development of automobile, vessel, rail road, and machine industry leads increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 900,000 ton a year, but most WFS buries itself and only 5~6% WFS is recycled as a material in construction materials. In this study, WFS is used as a fine aggregate for concrete. Five types of concretes aimed at the specified strength of 240$\pm$10 kgf/$cm^{2}$ , air contents of 4.5$\pm$1% and slump of 12$\pm$1.5cm were mixed with washed coarse seashore sand(WFS) in which salt was removed and then optimum mix proportion of concrete was determined. Moreover, basic properties such as setting time, workability, bleeding and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In .addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

  • PDF