This study is focused on forecasting the future of tole-democracy. Many Scholars expect that internet provides technological space needing realizing the tole-democracy or deliberate democracy. Especially in Korea, this expectation is higher than other nations because of political corruption and inefficiency. Therefore internet is intended to considering as new technologies reforming political process. In 16th the general election period, many candidates established home page and used as election campaign tool. And a little of home pages is payed attention to among voters. In spite of using internet as political medium, many political communication researchers have a doubt that internet will realize ideal direct democracy. It's reason is that internet is open and anonymous space. At anonymous space, communication participators is tended to be irresponsible and non-serious. Therefore it is hard that cyber-politics will be ideal type of democracy. In this context, this paper analyzed how pauicipators communicate with others at cyber bulletin board establishing candidate's home pages. Main research questions is how do discussions at cyberspace fulfill the conditions of deliberate democracy. Therefore, concrete questions include; who are participators at candidate's cyber bulletin board; which pattern do they communicate; what is the theme of communication; which effects do the anonymous character of cyberspace influence. To that purpose, this study conducted content analysis on 4,210 written matters at 82 cyber bulletin boards of candidate's home page establishing during 16th the general election period. It can be found that cyberspace in Korea still is not deliberate democracy space and not will be. Firstly, discussion patterns at cyber bulletin board is "candidate with supporters communication space. To be exact, it is said that candidate's home page is "the space of self-convincing among supporters." Secondly, the main themes of discussion are simple emotional expressions; "I support you!" "fighting" "Be vigor" etc. By contrast, real political contents'-central or local political matters - is relatively few. In the mode of expression, real political messages are more positive, logical than simple expressions, candidates private matters. Especially this characteristic will make cyberspace as "mutual slander space" consolidating anonymous characteristic of cyberspace. finally, Cyberspace in Korea still is not real "public sphere" realizing deliberate process. Therefore to be real public sphere, it is needed to participant's ethical maturity and political citizenship. In conclusion, it is difficult that cyberspace will reconstruct the Athene's Agora. On the contrary, Cyberagora will like to be irrespectable area fulfilling the sweeping. Making the deliberate space, technological possibility and ethical condition will have to be balanced together.
HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.
During sintering of very porous green bodies, as obtained by compaction of hard powders - such as tungsten carbide or ceramics - or by injection moulding, important shrinkage occurs. Due to heterogeneous green density field, gravity effects, friction on the support, thermal gradients, etc., this shrinkage is often non-uniform, which' may induce significant shape changes. As the ratio of compact dimension to powder size is very high, the mechanics of continuum is relevant to model such phenomena. Thus numerical techniques, such as the finite element method can be used to simulate the sintering process and predict the final shape of the sintered part. Such type of simulation has much been developed in the last decade firstly for hot isostatic pressing and next for die compaction. Finite element modelling has been recently applied to free sintering. The simulation of sintering should be based on constitutive equations describing the thermo-mechanical behaviour of the material under any state of stress and any temperature which may arise within the sintering body. These equations can be drawn either from experimental data or from micromechanical models. The experiments usually consist in free sintering and sinter-forging tests. Indeed applying more complex loading conditions at high temperature under controlled atmosphere is delicate. Micromechanical models describe the constitutive behaviour of aggregates of spheres from the deformation of two-sphere contact either by viscous flow or grain boundary diffusion. Such models are not able to describe complex microstructure and mechanisms as observed in real materials but they can give some basic information on the formulation of constitutive equations. Practically both experimental and theoretical approaches can be coupled to identify the constitutive equations. Such procedure has been performed for modelling the sintering of compacts obtained by die pressing of a mixture of tungsten carbide and cobalt powders. The constitutive behaviour of this material during sintering has been described by a linear viscous constitutive model, whose functions have been fitted from results of free sintering and sinter-forging experiments. This model has next been introduced in ABAQUS finite element code to simulate the sintering of heterogeneous green compacts of various geometries at constant temperature. Examples of simulations are shown and compared with experiments.
Femoral neck anteversion is the angle between the neck and the knee axis projected on a plane perpendicular to the longitudinal axis. Conventional methods that use cross-sectional Computed Tomography(CT) images to estimate femoral anteversion have several problems because of the complex 3D structure of the femur. These are the ambiguity of defining the longitudinal axis, the femoral neck axis and condylar line, and the dependence on patient positioning. Especially the femoral neck axis that is known as a major source of error is hard to determine from a single or multiple 2D transverse images. So we developed a new method for measuring femoral anteversion by 3D modeling method. In this method, femoral head is modeled as a sphere. The center of femoral neck is the mid-point of the 2D reconstructed oblique image in the femoral neck part. Then neck axis is a line connecting foregoing two centers. We model the longitude of femur as a cylinder, and the long axis is defined from the fitted cylinder. The knee axis which is tangent to the back of the femoral condyles is easily determined by table-top method. By the definition of femoral anteversion, the femoral anteversion is easily calculated from this model.
<아바타>(Avatar, 2009)의 성공 이례로 세계 영화 및 미디어 시장에는 큰 변혁이 일어났다. 3D 입체 영상에 대해 새로운 산업적 가능성이 예측되었고 다양한 미디어 플랫폼에서 엄청난 제작지원이 이루어지기 시작했다. 전 세계의 가정용 전자제품 TV 시장동향을 보면 하드웨어 분야에서는 국내의 기술은 상당히 높은 수준의 산업적 부가가치를 창출하고 있다. 하지만 애니메이션 분야에서의 3D 입체에 대한 효과적이고 체계적인 제작 파이프라인과 사례 분석이 부족한 현실이다. 3D 애니메이션 <뽀롱 뽀롱 뽀로로>를 입체 애니메이션으로 제작한 사례분석을 통해 적합한 3D TV 입체 애니메이션 제작 파이프라인을 구축하고자 한다. 3D 입체감을 높이기에 적합한 연출적 요소와 공학적 요소 특히, 주요 관객인 아이들에게 맞는 휴먼 팩터(human factor)와 3D Sweetening 등을 함께 적용함으로써 기존의 입체 콘텐츠와 차별화하고자 한다. 이는 차세대 애니메이션의 새로운 교두보를 확보하고 한국 애니메이션의 국제적인 경쟁력을 키우는데 큰 역할을 할 것이다.
다이아몬드는 산업적으로도 보석으로서도 경제적으로 매우 유용한 소재이다. 최근의 소형 고압고온 처리기의 발달로 저급한 갈색의 보석용 천연다이아몬드를 쉽게 고부가가치의 보석인 무색 또는 팬시칼라의 다이아몬드로 향상시키는 처리기술이 가능하게 되었다. 이러한 처리 다이아몬드는 천연의 무색, 팬시칼라 다이아몬드와 물성이 동일하여 기존의 보석감정 방안으로는 구별이 어려워서, 처리 다이아몬드를 경제적이고, 신속하고, 비파괴적으로 천연다이아몬드로부터 감별해 낼 필요성이 생겼다 기존의 광학적인 확대분석으로는 천연석과 처리석의 감별이 불가능하였다. 마이크로 라만 분석기를 이용하여 다이아몬드의 고유피크가 고압고온 처리시의 잔류응력에 의해 이동되는 현상으로 처리석의 감별 가능성을 확인하였다. Type I 다이아몬드는 처리에 의해 $10^4$ 정도의 압축스트레인이, Type II는 인장 잔류 스트레인이 존재하였다. 따라서 적절한 처리전의 기준시료가 있다면 이러한 잔류응력을 확인하는 것이 가능하였다.
The most cost-effective method of reducing abrasive wear in mechanical parts is increasing their hardness with thin hard coatings. In practice, the composite hardness of the coated substrate is more important than that of the substrate or coating. After full unloading of the load applied to an indenter, its indentation hardness evaluated based on the dent created on the test piece was almost dependent on plastic deformation of the substrate. Following the first part of this study, which proposes a new Brinell hardness test method for a coated surface, the remainder of the study is focused on practical application of the method. Indentation analyses of a rigid sphere and elastic-perfect plastic materials were performed using finite element analysis software. The maximum principal stress and plastic strain distributions as well as the dent shapes according to the substrate yield stress and coating thickness were compared. The substrate yield stress had a significant effect on the dent size, which in turn determines the Brinell hardness. In particular, plastic deformation of the substrate produced dents regardless of the state of the coating layer. The hardness increase by coating behaved differently depending on the substrate yield stress, coating thickness, and indentation load. These results are expected to be useful when evaluating the composite hardness values of various coated friction surfaces.
본원에 도입된 새로운 소프트웨어는 SPECT나 전신 뼈 영상에만 국한되어 사용되어 지고 있지만 보다 효과적으로 다른 검사에 적용하기 위해 팬텀을 통한 실험과 영상의 비교를 통하여 그 유용성을 찾아보고자 하였다. 실험을 위하여 Body IEC phantom과 Jaszczak ECT phantom, Capillary를 이용한 실린더 팬텀을 이용하였고, 영상의 처리 전후의 계수, statistics를 비교해 보고 contrast ratio나 BKG의 변화들을 정량적으로 분석해 보았다. Capillary source를 이용한 FWHM 비교에서는 PIXON의 경우 처리 전후의 영상에서 차이가 거의 없었고, ASTONISH의 경우 처리 후의 영상이 우수해짐을 확인할 수 있었다. 반면 Standard deviation과 그에 따른 Variance는 PIXON은 다소 감소한 반면 ASTONISH는 큰 폭으로 증가함을 보였다. IEC phantom을 이용한 BKG variability 비교에서는 PIXON의 경우 전체적으로 감소한 반면 ASTONISH는 다소 증가하는 경향을 보였고, 각각의 sphere에 대한 contrast ratio도 두 가지 방법 모두 향상됨을 확인하였다. 영상의 스케일 면에서도 PIXON의 경우 처리 후에는 window width가 약 4-5배 증가하였지만 ASTONISH에서는 큰 차이가 없었다. 팬텀 실험 분석 후 ASTONISH는 정량적 분석을 위해 ROI를 그려야 하는 기타 검사와 대조도를 강조하는 검사에 적용 가능성을 보였고, PIXON은 획득계수가 부족하거나 SNR이 낮은 핵의학 검사에 유용하게 사용될 것으로 생각되었다. 영상의 분석 인자로 많이 사용되는 정량적인 수치들은 소프트웨어의 적용 후 대체로 향상되었지만 감마카메라의 차이보다 소프트웨어간의 알고리즘 특성으로 인한 결과영상의 차이가 많아 모든 핵의학 검사의 적용에 있어서 일관성을 유지하기는 어려울 것으로 사료된다. 또한 전신 뼈 영상과 같이 검사시간의 획기적 단축과 같은 수단으로는 우수한 영상의 질을 기대하기 어렵다. 새로운 소프트웨어의 도입 시 병원의 특성에 맞는 protocol과 임상 적용 전에 많은 연구가 필요할 것으로 사료된다.
PACS의 도입에 발맞추어 시작된 digital 의료영상은 현재 방사선 진단 및 치료 영역에서 일반화되었으며 특히 진단영역에서는 눈부신 발전을 거듭하고 있다. 치료영역에서의 digital image 구현은 상대적으로 느린 성장과정을 거쳐 오늘에 이르고 있다. 본 논문은 이러한 analog에서 digital로 변화하는 흐름을 인식하여 정도관리(Quality Assurance) 업무 중 mechanical check 부분을 digital image base 업무로 대체하여 수행하고, 기존의 육면체 또는 사각형틀의 개념을 탈피한 구형(球形)의 Spherical mechanical check device(SMCD) 고안하여 그 실용성을 실험하였다. Source(target)에서 image detecter 간의 거리가 항상 일정하고, Spherical mechanical check device(SMCD)의 중심까지 거리가 일정하다면 어느 방향에서 SMCD를 exposure하더라도 그 크기는 항상 일정하게 영상으로 표현 될 것이다. 이를 위해 정확한 반구(半球)를 2개 정밀 제작하여 그것을 합쳤을 때 정원(正圓)의 구(球)가 되도록 하였다. 이를 이용하여 radiation field와 light field의 일치도, radiation field 크기의 정확도($(5{\times}5,\;10{\times}10,\;15{\times}15\;cm)$), Collimator field 크기의 정확도($5{\times}5,\;10{\times}10,\;15{\times}15\;cm$), Gantry rotation isocenter check, Collimator rotation isocenter check, Room laser accuracy check, Collimator rotation angle check와 Couch rotation angle check 등 기존의 mechanical check를 digital image를 이용하여 실행할 수 있었으며, 기존의 Flat 또는 정육면체 형태의 mechanical check device로는 쉽게 하기 힘든 non-coplanar field에 적용되는 Gantry와 Couch가 동시에 rotation되었을 때 그 isocenter의 일치도를 real time으로 확인할 수 있었다.
목 적: PACS의 도입에 발맞추어 시작된 디지털 의료영상은 현재 방사선 진단 및 치료 영역에서 일반화되었으며 특히 진단 영역에서는 눈부신 발전을 거듭하고 있다. 치료영역에서의 디지털 영상 구현은 상대적으로 느린 성장과정을 거쳐 오늘에 이르고 있다. 본 논문은 이러한 아날로그에서 디지털로 변화하는 흐름을 인식하여 정도관리(Quality Assurance) 업무 중 기계적 점검(Mechanical check) 부분을 디지털 영상 기반 업무로 대체하여 수행하고, 기존의 육면체 또는 사각형틀의 개념을 탈피한 구형(球形)의 Spherical type mechanical check device (SMCD)를 고안하여 그 실용성을 실험하였다. 대상 및 방법: 선원에서 영상 detecter 간의 거리가 항상 일정하고, SMCD의 중심까지 거리가 일정하다면 어느 방향에서 방사선으로 SMCD를 조사하더라도 그 크기는 항상 일정하게 영상으로 표현 될 것이다. 이를 위해 Polyester P.E 재질의 정확한 반구(半球) 2개를 자체 제작하여 그것을 합쳤을 때 정원(正圓)의 구(球)가 되도록 하였다. 결 과: SMCD를 이용하여 방사선조사면과 광조사면의 일치도, 방사선조사면 크기의 정확도($5{\times}5$, $10{\times}10$, $15{\times}15cm^2$), Collimator field 크기의 정확도($5{\times}5$, $10{\times}10$, $15{\times}15cm^2$), Gantry rotation isocenter check, Collimator rotation isocenter check, Room laser accuracy check, Collimator rotation angle check와 Couch rotation angle check 등 기존의 기계적 점검을 디지털 영상을 이용하여 실행할 수 있었다. 결 론: 기존의 Flat 또는 정육면체 형태의 기계적 점검 장치로는 쉽게 하기 힘든 non-coplanar field에 적용되는 Gantry와 Couch가 동시에 rotation 되었을 때 그 isocenter의 일치도를 실시간으로 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.