• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.327-340
• /
• 1997

Geochemical characteristics of groundwater, based on chemical analyses of 54 water samples, differ among main rocks of Haman formation, Panyawoel formation, andesite and granite in Daegu area in relation to mineralogical and chemical compositions of the rocks. Concentrations of most solutes are higher in groundwaters of Haman and Panyawoel formations than in those of andesite and granite. High concentrations of $Ca^{2+}$ and $Mg^{2+}$ in groundwaters of the sedimentary rocks result mainly from reaction of $CO_2$-charged water with calcite and weathered feldspars. Average groundwaters in the sedimentary rocks are oversaturated with respect to calcite. Major types of groundwaters are hard $Ca(HCO_3)_2$ and $CaSO_2-CaCl_2$ with hardness of 442 mg/l for Haman formation and 275 mg/l for Panyawoel formation whereas they are soft $Ca(HCO_3)_2$ with hardness 35 mg/I for andesite and 39 mg/I for granite. $Ca(HCO_3)_2$ type results mainly from calcite-dissolution and $CaSO_4-CaCl_2$ from pyrite and partly from domestic pollutants. $CaSO_4-CaCl_2$ type may indicate that groundwaters in the sedimentary rocks are more evolved geochemically than those in the igneous rocks, but it is not obvious because the type might be affected by pyrie dissolution and domestic pollutions. Acid rain is buffered by active calcite in the sedimentary rocks. In the igneous rocks acid rain might react with gibbsite and other forms of $Al(OH)_3$ that might have accumulated as weathering products of primary silicates, and is buffered.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.1
• /
• pp.6-10
• /
• 2005

Lateral roots of soybean sprouts should deeply affect their quality and marketability. The study was done to compare the effects of ocher, chitosan, corn kennel, tea (Thea sinensis L.) and hard rubber tree (Eucommia ulmoides Oliver) leaf extracts on lateral root formation, growth and morphological characters of the sprouts. Seeds of three cultivars, Pungsannamulkong, Sowonkong and Junjery, were imbibed for 5 hours into their 10% solutions and cultured for 6 days. The cultured sprouts were classified into 4 categories to calculate their composition rates on the base of hypocotyl lengths;>7 cm (A), 4 to 7 cm (B), < 4 cm (C) and not germinated (D), and their morphological characters, fresh and dry weights were measured. Composition rate of A was the lowest in Junjery of the three cultivars, while that of C showed reverse result compared to A. This results was the most distinct in hard rubber tree leaf extracts (HRTLE) of the five treatments. In HRTLE treatment, lateral root formation rate were formed in almost of Sowonkong although reduced in order of Pungsannamulkong and Junjery. However, there was no significant difference between the other treatments. Lateral roots per sprout were the lowest in HRTLE treatment of the 5 treatments. In all treatments except the chitosan treatment, the roots were most formed in Sowonkong but least in Junjery. Sprout length adding hypocotyl and root was the shortest in Junjery compared to the other two cultivars. and was the longest in tea leaf extract treatment but the shortest in HRTLE treatment. The result in total fresh weight of sprouts was similar to that of the sprout length.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.700-708
• /
• 2001

Traumatic injuries in young patients can result in the interruption of the development of the incompletely formed roots. In teeth with incomplete root-end formation and necrotic pulps, the root canals must be completely debrided. Because of a lack of an apical stop and the presence of thin and fragile walls in these teeth, it is imperative to perform apexification to obtain an adequate apical seal. Calcium hydroxide has become the material of choice for apexification. Despite its popularity for the apexification procedure, calcium hydroxide therapy has some inherent disadvantages that include variablility of treatment time, unpredictability of apical closure, difficulty in patient follow-up, and delayed treatment. An alternative treatment to long-term apexification procedure is the use of an artificial apical barrier that allows immediate obturation of the canal. MTA(Mineral Trioxide Aggregate) is a powder consisting of fine hydrophilic particles of tricalcium silicate, tricalcium aluminate, tricalcium oxide and silicate oxide. MTA has a pH of 12.5 after setting, similar to calcium hydroxide. This may impart some antimicrobial properties. MTA has low solubility and a radiopacity slightly eater than that of dentin. Also, MTA leaked significantly less than other materials and induced hard-tissue formation more than other materials.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.19-26
• /
• 1997

Odontodysplasia is a rare developmental anomaly of tooth formation in which hard tissue are affected. Odontodyplasia affects the primary and permanent dentitions in the maxilla, mandible, or both jaws. The maxilla is involved twice as often as the mandible. The condition is more common in female than in male patients and in the anterior than in the posterior regions. The clinical manifestation of odontodysplasia are hypoplasia and hypocalcification of the enamel and dentin of affected teeth. Teeth tend to be small and discolored, with short roots and widely open pulp canal. Delayed eruption of affected teeth with abscess formation is common. Radiographically teeth assume a faint radiolucent image ("ghost teeth"). enamel and dentin appear thin and are similar in radiodensity. The pulp chambers are often larger than normal, calcifications(pulp stone and denticle) are found within them. The etiology of regional odontodysplasia is unknown. However, several causes have been discussed, including somatic mutation, local circulatory disorders, local trauma, failure of migration and differentiation of neural crest cells, local infection.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.434-438
• /
• 2003

The shearing process for the sheet metal is normally used in the precision elements such as semi-conductor components. In these precision elements, the burr formation brings a bad effect on the system assembly and demands the additional de-burring process. In this paper, we have developed the desktop-type precision punching system to investigate the burr formation mechanism and present kinematically Punch-die auto aligning methodology, for the purpose of burr unifomizing and minimizing, between the rectangular shaped punch and die. By using the scanning electron microscope, the aligned punching results are compared with the miss-aligned ones. Also, we measured the relative burr heights using the self-designed laser measuring device for insitu self aligning. Since it is hard to get the perfect, so called, burr-free edges during the shearing process, we introduced the ultrasonic do-burring machine. The de-burring operation was carried out by a novel do-burring method, the reversal flow resistance method, under different machining loads and abrasive types. The final do-burring results show the validity of our punching do-burring system pursuing the burr-free punched elements.

• Journal of Welding and Joining
• /
• v.11 no.2
• /
• pp.74-85
• /
• 1993

Effect of Si metal powders addition with the plasma transferred arc(PTA) overlaying process on characteristics of the alloyed layer in aluminum alloy(A5083) has been investigated. The overlaying conditions were 175-250A in plasma arc current, 500mm/min in travel speed, the 5-20g/min in powder feeding rate. Main results obtained are summarized as follows. 1)Sufficient size of molten pool on surface of base metal was required for forming an alloyed layer; in a fixed travel, the formation of alloyed layer with clear and beautiful surface depend upon the plasma arc current and powder feeding rate; the greater plasma arc current and the smaller powder feeding rate were, the better bead was formed. Optimum alloyed conditions by which an excellent alloyed bead obtained was 225A in plasma arc current. PTA process made it possible to form an alloyed layer with up to 67wt% Si. 2)Microstructure in the alloyed layer was in accord with prediction from the Al-Si phase diagram 3)The hardness of the alloyed layer increased in proportion to Si content. 4)As volume fraction of primary Si increased, the specific wearness of the alloyed layer was significantly improved. However, no further improvement was found when the volume fraction was greater than about 30%. 5)Utilizing the PTA process, a crack free alloyed layer with maximum hardness of about Hv 310 could be obtained.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.69-72
• /
• 2011

Purpose: Myositis ossificans is a benign condition of heterotopic bone formation that still requires more of its pathologic explanation. The lesions are localized predominantly to the high-risk sites of injury, involving flexor muscles of the upper limbs and thigh, but rarely in the head and neck area. Methods: A case of a 44-year-old male patient presented with a palpable hard mass on nasal dorsum. The patient experienced a similar lesion on upper limb few years ago. On computed tomographic image, the lesion presented focal definite increase in opacity compatible to adjacent bone densitiy on nasal dorsum. Results: The lesion was excised under open rhinoplasty incision. The pathologic report revealed focal bone formation and calcification within skeletal muscle. Conclusion: We describe a unique and only case of a myositis ossificans on nasal dorsum which is indifferent from previous concept.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.73-73
• /
• 1999

A large area negative metal ion beam source is developed. Kinetic ion beam of the incident metal ions yields a whole nucleation and growth phenomena compared to the conventional thin film deposition processes. At the initial deposition step one can engineer the surface and interface by tuning the energy of the incident metal ion beams. Smoothness and shallow implantation can be tailored according to the desired application process. Surface chemistry and nucleation process is also controlled by the energy of the direct metal ion beams. Each individual metal ion beams with specific energy undergoes super-thermodynamic reactions and nucleation. degree of formation of tetrahedral Sp3 carbon films and beta-carbon nitride directly depends on the energy of the ion beams. Grain size and formation of polycrystalline Si, at temperatures lower than 500deg. C is obtained and controlled by the energy of the incident Si-ion beams. The large area metal ion source combines the advantages of those magnetron sputter and SKIONs prior cesium activated metal ion source. The ion beam source produces uniform amorphous diamond films over 6 diameter. The films are now investigated for applications such as field emission display emitter materials, protective coatings for computer hard disk and head, and other protective optical coatings. The performance of the ion beam source and recent applications will be presented.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.754-760
• /
• 1996

Effects of washing and additives on the texture of squid surimi gel which has been known to hard to gelation due to high protease activities and many water solubles were studied by SDS-PAGE, compression test, jelly strength and transmission electron microscopy analysis (TEM). Myosin (205 kDa) heavy chain was the major protein in water soluble fractions. It was impossible to make a gel after washing of the minced squid meat. These results suggested that squid (Todarodes pacificus) minced meat does not need a washing for good jelly products. $3.0\%$ of bovine plasma protein (BPP) produced the hardest gel ($16\%$ harder than the control) among the additives including egg white (EW), potato extracts (PE) and transglutaminase-K (TG-K) by compression test (P>0.05). Microstructure of control, $2\%$ EW and $4\%$ TG-K treated gels showed a sponge-like structure with more vacant space. Gels containing $3\%$ BPP formed the most rigid and arranged networks. Those results indicates that poor gel-network formation Was due to the degradation of myofibrillar proteins by proteases contained in the minced meat, which result in non-interlinkage.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.4
• /
• pp.209-216
• /
• 2011

Surface coatings were prepared on SKD11 core mold steel by plasma electrolytic oxidation (PEO). The coatings were investigated about the formation condition of core mold steel. SKD11 were coated by PEO in a mix solution of Sodium Aluminate $NaAlO_2$ (10 g/l), Sodium Silicate powder $Na_2SiO_3$ (0.5 g/l), Sodium tungstate dihydrate $Na_2WO_42H_2O$ (0.5 g/l) at less than $30^{\circ}C$. The electrical condition were voltage : 500~600 V; Pulse : 600~1800 Hz; current density 15~20 $A/dm^2$ various time : 3 min~40 min. The coatings surface morphology, cross-section, friction coefficient, hardness were investigated. The PEO coatings on SKD11 core mold steel showed the extended service life.