• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.225-233
• /
• 1999

Harbor design and construction plan in Korea becomes the most hot issue both in the Maritime Affairs and Fisheries Office and in the related port industries. Production of the plane and cross section maps together with the profile map for harbor project is done firstly and is important in all procedure because it is the most basic datum in counting the constructional expense for determination of the area and capacity. As the expense assigned on surveying part among the total expenses of harbor planning and construction in Korea is very small, it is difficult to make exact maps. Moveover, because the method used to make such maps is mostly traditional surveying such as plane table surveying , offset surveying, stadia surveying and level surveying, etc, it is difficult to get precise three dimensional maps. Therefore, for making more precise map in the harbor project, we have to use the newest surveying equipment. This study discusses the method of old surveying and recent surveying used for the three dimensional map of the site for lighthouse which gives navigational aids for the in-and out-bound ships. The authors are proposing a method for more precise three dimensional positioning in this study.

• 한국해안해양공학회지
• /
• 제18권1호
• /
• pp.35-42
• /
• 2006

최근 각국에서 대형항만 건설이 가속화되는 추세에서 화물수송의 국제적 우위를 점하기 위한 경쟁이 날로 치열해지고 있다. 따라서, 물류유통의 측면에서 항만기능이 재조명되고 있으며 화물의 하역, 처리 및 수송과정을 포함하는 일련의 항만기능의 생산성 제고를 위한 노력들이 경주되고 있다. 항만을 통한 물류유통의 효율 및 생산성은 항만시설과 운영체계의 효율적 결합을 통하여 가능하다. 과거에는 항만건설이 주로 공학적 측면에서 수행되었으나 향후에는 건설 이후에 발생하는 물류유통의 효율을 보다 정확히 고러하여 종국적으로 항만의 생산성을 극대화하는 방향으로의 전환이 시도될 것으로 전망된다. 본 연구에서는 항만기술자들의 이해를 돕기 위하여 항만을 통한 화물처리과정의 생산성을 평가하기 위한 제반 지표를 소개하였다. 아울러, 부산항과 광양항 컨테이너터미널의 현장 데이터를 이용하여 각 지표들을 비교 평가하였으며 이들의 개선방향을 제시하였다.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.525-532
• /
• 2010

Mobile Harbor (MH) is a new transportation platform that can load and unload containers onto and from very large container ships at sea. It could navigate near harbors where several vessels run, or it could navigate through very narrow channels. In the conceptual design phase when the candidate design changes frequently according to the various performance requirements, it is very expensive and time-consuming to carry out model tests using a large model in a large towing tank and a free-running model test in a large maneuvering basin. In this paper, a new Planar Motion Mechanism(PMM) test in a Circulating Water Channel (CWC) was conducted in order to determine the hydrodynamic coefficients of the MH. To do this, PMM devices including three-component load cells and inertia tare device were designed and manufactured, and various tests of the MH such as static drift test, pure sway test, pure yaw test, and drift-and-yaw combined test were carried out. Using those coefficients, course-keeping stability was analyzed. In addition, the PMM tests results carried out for the same KCS (KRISO container ship) were compared with our results in order to confirm the test validity.

• 한국BIM학회 논문집
• /
• 제9권4호
• /
• pp.21-30
• /
• 2019

Many studies on BIM-based design, construction and operation have already been conducted on roads, railways, etc., but BIM research in the ports and harbors is still lacking. This research develops BIM Library and Technical contents focused on practical usability of ports and harbors infrastructure. We have developed technical content by applying various User Interfaces and workflows, considering the characteristics of ports and harbors design. In order to examine the practical utility of the developed library and contents, we tried modeling the breakwater using these. As a result, we confirmed that collaboration of BIM library and technical contents could significantly improve the productivity of BIM design by increasing library usage and automating repetitive tasks.

• 한국수자원학회논문집
• /
• 제43권1호
• /
• pp.41-49
• /
• 2010

본 연구의 계단형 보는 자연형 횡단 구조물의 한 형태로 제안되고 있다. 계단형 보 하류에서의 흐름은 기존 보(Round Crest Weir)에서 발생하는 도수와 달리 WTF(Wave Type Flow)라는 독특한 흐름이 발생한다. WTF는 계단형 보 하류에서 단차로 인해 발생되는 재순환영역(recirculation area)이 일정조건에서 발달하여 수면을 상승시키는 현상이다. WTF 조건에서의 파고는 하류수위(tailwater level) 보다 높아지고 WTF 구간에서의 최대유속발생이 수면에 가까운 곳에서 발생한다. 이와 같은 결과는 WTF 현상이 설계 시 접합부에 영향을 줄 수 있는 중요 인자임을 나타내는 것이다. 본 연구는 수리실험을 통해 WTF이 발생되는 수리조건과 WTF의 규모를 파악하였고 계단형 하류흐름조건에 따른 유속분포를 분석하였다. 본 연구의 결과는 계단형 보 설계 시 고려되지 못한 부분으로서 차후에 계단형 구조물 또는 계단식 변형 구조물 설계 시 주요 자료로 활용 될 것이다.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.497-504
• /
• 2012

모바일하버는 해상에서 컨테이너 상하역 작업을 하는 새로운 해상물류 시스템이다. 모바일하버용크레인과 같이 해상에서 작업하는 대형 구조물은 파도에 의해 발생하는 지지부의 운동으로 관성력의 영향을 크게 받는다. 따라서 구조물의 안전성에 대한 정확한 검증이 요구되며, 생산 비용을 줄이기 위해 경량화가 매우 중요하다. 이런 요구조건을 위해 동적 응답 최적설계를 수행한다. 등가정하중법은 동하중을 등가정하중으로 변환한 후, 정적 응답 최적화기법을 사용하여 문제를 해결하는 동적 응답 최적설계 방법이다. 지지부의 움직임을 고려한 등가정하중법을 제안하고, 제안한 방법으로 모바일하버용 크레인을 최적화한다.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.399-408
• /
• 1999

Copeland’s(1985) hyperbolic mild-slope equation including diffraction refraction and reflection in the wave field is used as a governing equation in this study. The result of Maruyama & Kajima(1985) is used to calculate wave direction and that of Watanabe & Maruyama(1986) is used as a energy dissipation formula. Numerical solutions are obtained by the Leap-Frog scheme and compared with Watanabe & Maruyama’s (1984) hydraulic experimental results and numerical simulation results for the detached breakwater. This wave model is applied to a detached breakwater and compared with Watanabe and Maruyama’s (1984) hydraulic model results to check the characteristics of reflected wave field around a detached breakwater. The distribution of wave height and we phase in front of a detached breakwater is more accurate than the Watanabe and Maruyama’s numerical results. The results from our wave model show good agreements with the others and also show nonlinear effects around the detached breakwater. This model is applied to the Gamcheon harbor of pusan. the field observations were carried out at Pusan harbor wave station in 1986-1995 and the results were accepted as a design wave condition in this study. The wave height and wave period was measured by Dong-A university at one station in the Gamcheon harbor in 1996-1997 and used as a calibration criterion. The measured data were used as input data for the numerical simulation and also compared with simulated results. The numerical simulation shows a fairly good results which considering the effect of topographic characteristics and effect of narrow entrance due to two separated breakwaters in Gamcheon harbor. The wave distribution characteristics inside Gamcheon harbor is quite different with the offshore wave direction and wave period.

• 해양환경안전학회지
• /
• 제3권S1호
• /
• pp.55-73
• /
• 1997

It is well known that simulation study in the preliminary design stage of harbors or berths is of great use, since it can provide helpful informations to the designer from the view point of ship navigations. In this paper, a brief review is made in the safety assessment of ship navigation for a 320,000 DWT VLCC entering Yecocheon harbor area, which is carried out by shiphandling simulator system. The geographic data base for the harbor as well as the mathematical models of the ship and environmental effects are designed and developed. Based in the on-site inspections and interviews with pilots in Yeocheon area, basic maneuvering plans and consistence with real operation conditions. Berthing and deberthing maneuvering simulations as well as approaching and departing simulations are carried out by 3 experienced navigators according to the maneuvering plans and environmental scenarios. The simulation results are analysed in various ways to evaluate the quantitative and qualitative maneuvering difficulties and thereby to assess the safety of ship navigation in that area.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.53-60
• /
• 2009

Recently, since there are several problems in space, the infra-structure and the facilities in the contiguity of the existing harbors due to the trend of enlarging the container capacity of the large container vessel, a special floating platform named as the Mobile Harbor has been proposed conceptually as an effective solution of those problems. Two kinds of hull shapes, a conventional mono-hull type and a catamaran type, are proposed as midway feeders to transfer containers to the harbor on land from a large container ship on near shore. In this study, the motion response and mooring analysis are carried out for comparing the global performance of two types of Mobile Harbor. Robot arm mooring facility specially is devised and newly tried to use for the safe fixation of a large container ship and the Mobile Harbor on near shore. It would be expected for this comparison study to give a guideline to design the efficient hull form for a midway loader.

• 한국환경과학회지
• /
• 제21권11호
• /
• pp.1395-1406
• /
• 2012

The purpose of this study is to analyze the hydraulic characteristics of the ice-harbor fishway by considering its geometrical form and utilize such analysis results as the foundational database to be used when establishing fishways in the future. first of all, the study realizes the same form as an ice-harbor fishway that is currently implemented via a FLOW-3D model and estimated the parameters that were optimal to the numerical mock test. Then, this study analyzed the level of sensitivity of the flow conditions which fluctuated due to the changes in geometrical changes by adjusting the inclination and pocket spacing by using the estimated optimal parameters. As a result, the study arrived at the following conclusions. The vortical velocity increased and had a significant effect on the inclination of the fishway. Furthermore, as the velocity within the vorticity increased due to the narrowed vortical area, it was determined that further studies on vorticities or the determination of the design method for the decrease in vortical velocity were imperative.