• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.1-7
• /
• 2012

Chemical composition, morphological properties and papermaking properties of Sasa quelpaertensis Nakai were investigated in order to use it comprehensively. The lignin contents of stalks and leaves were 18.8% and 15.3% and the holocellulose contents were 63.3% and 48.6% respectively. The contents of ash and the amount of water extract showed the higher value than those of wood or other bamboo species. The average fibers length and width of Sasa quelpaertensis Nakai were 780 ${\mu}m$ and 14.8 ${\mu}m$. The fibers of Sasa quelpaertensis Nakai stalk had thinner width and more slender structure than those of softwood. The handsheet made of Sasa quelpaertensis Nakai alkaline pulp showed higher in tensile strength and bulkier structure than those of handsheet made of soft wood unbleached kraft pulp.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.79-84
• /
• 2006

In order to improve filler-fiber bonding in paper, starch-filler composites were prepared by a starch-fatty acid complex formation method. These composites were used as a papermaking filler to improve the physical properties of the paper, filler retention and the sizing effect. The solubility of the starch-fatty acid complex in water at different temperatures was measured. The results indicated that the starch-fatty acid complexes have very low solubility in water below $70^{\circ}C$, which can be easily coated on clay surface to modify clay-fiber bonding ability. The clay-starch composite filled handsheets showed that paper strength could increase more than $100{\sim}200%$ compared to untreated clay. It was found that ZDT of the handsheet decreased as the clay content increased when unmodified clay was used, but it increased when the starch-fatty acid composite modified filler was used. It was also found that the presence of fatty acide in the complex increased the water-repellant property of the handsheet, which can be used to aid in sizing during papermaking. Filler distribution and bonding characteristics between the composite and fiber were investigated using Scanning Electron Microscopy(SEM).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.18-25
• /
• 2003

The adsorption of co-cationic dual polymer system was investigated as was the fiber dispersion stability of a paper stock suspension. Polyaluminum chloride(PAC) and polyamidoamine epichlorohy-drin(PAE) polymers were used as wet-end additives. The adsorbed amounts of PAE polymer in a wet stock were measured by using polyelectrolytic PCD titration. The sheet forming experiments were carried out in a standard handsheet machine. Fiber dispersion stability and relative retention were evaluated in terms of M/K non-uniformity index and sheet basis weight, respectively. The PAE polymer adsorption of Langmuir-isothermal type decreased with increasing PAC addition level. The combination of the two cationic polymers presumably exerts a site-blocking effect by the low molecular weight PAC which gives a partial charge neutralization at a minimum level of addition. From a thermodynamic view point of PAE adsorption, an increase in adsorption entropy and a decrease in train number suggests that the PAR polymer has an extended conformation structure that potentially leads to an enhancement of the fiber dispersion stability. This conclusion is supported by handsheet experiments that examined the PAC-PAE dual polymer effects on the sheet formation and retention.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.181-190
• /
• 2006

This study was conducted to develop dry forming technology and evaluate the properties of dry formed paper made from Hw-BKP. A dry forming mold (DFM) was developed to observe the phenomena of dry forming and evaluate the properties of formed papers. To upgrade the DFM a dry forming system (DFS) was developed. This DFS was designed to improve the formation of dry formed papers and enhance the productivity of dry forming. Dry forming gave papers with greater bulk and opacity than wet forming. Tensile strength of dry formed paper was greater than that of conventional wet formed handsheet when they were made from the same dry disintegrated fibers. But tensile strength of conventional wet formed handsheet made from beaten fiber was much greater than that of dry formed paper made from dry disintegrated fibers. When solvent dried beaten fibers were used in dry forming, the tensile strength of dry formed papers reached 73.5% of the wet formed handsheets made from beaten fiber. It showed that dry forming has a significant potential in improving strength properties when proper preparation of fibers and appropriate humidification, pressing, and drying processes are employed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.113-118
• /
• 2011

• Journal of Sericultural and Entomological Science
• /
• v.41 no.3
• /
• pp.201-204
• /
• 1999

The silk/paper mulberry paper was prepared by recycling of the hard twisted silk waste and its mechanical properties was investigated. The silk waste was pretreated with sodium hydroxide(0.5%) and sodium carbonate(4%) to make it easy for beating and fibrillation. The silk/paper mulberry hand sheet paper has better mechanical properties of tearing strength and air permeability compared with the traditional and modified traditional paper. Treating with alkaline solution, the hard twisted silk waste could be used for an novel composite material.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.58-64
• /
• 2014

Management of organic waste such as livestock manure has been considered as very important issue in terms of the environment. The anaerobic digestion of livestock manure become more attractive treatment method and has been widely applied. In this work, the properties of the residue after the anaerobic digestion of livestock manure was evaluated for providing the basic data to develop new application. The lignin and the ash contents of the residue were much higher than those of other biomass such as wood. The components of the residue were also analyzed with SEM-EDS and Elemental Analyzer. The addition of the residue into the handsheet paper resulted in the higher bulk and he higher air permeability with the loss of the strength properties. The water holding capacity of the handsheet were increased until the 40 % addition of the residue.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.53-60
• /
• 2015

The effects of stirring speed during filler modification by dual polymers on flocculation and reflocculation of PCC (precipitated calcium carbonate) particles and its effect on handsheet properties were elucidated. PCC surface was modified by adsorbing A-PAM (anionic polyacrylamide) and C-starch (cationic starch) in series at various stirring speeds. It was found that increasing stirring speed during filler modification decreased the initial floc size of PCC. Continuous stirring with the same speed for filler modification resulted in the decrease of a floc size, eventually reached a steady state. The variations in a floc size was influenced by the stirring speed during filler modification: the lower the stirring speed during filler modification, the larger the floc size variations. Conclusively, the stability of PCC floc could be improved by increasing the stirring speed. In addition, the stirring speed influenced the handsheet properties. The smaller the PCC floc, the lower the strength of handseet. However, too much larger floc size also deteriorated paper strength. There exists an optimum floc size in term of paper strength which shall be controlled by stirring speed during filler modification.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.103-110
• /
• 2001

Bio-kraft pulping of Populus alba${\times}$glandulosa pretreated with white-rot fungus, Phanerochaete chrysosporium KCCM 34740, was investigated The biopulping efficiency was evalued based on fungal pretreatment time and properties of bio-kraft pulp (pulp yield, freeness, WRY, kappa number and brightness) in comparison to the controls. Pretreatment of poplar wood chips with Phanerochaete chrysosporium KCCM 34740 for 10days resulted in a some increase in screened yield (by 2%). According to increase of fungal incubation time, decrease in freeness (CSF) and increase in WRY were observed And bio-kraft pulping also led to improvement of physical properties of handsheet. As a result of bio-beating effect, we expect the saving of chemicals in kraft cooking process and energy consumption in beating process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.4 s.107
• /
• pp.41-48
• /
• 2004

To make a basepaper for multipurposed seed paper, old news print (ONP) and mixed office waste paper (MOW), modified and unmodified with a commercial cellulase, were investigated. Each handsheet was applied with different chemicals such as insecticides, germicides and herbicides. The interactions behaviors of chemicals used with base papers were evaluated by means of the contents of chemicals impregnation and dissolving behaviors in water and soil. The ONP and MOW treated with the cellulase had higher impregnation and dissolving capacities in both water and soil than untreated ONP and MOW. However, the modified ONP showed lower impregnation and dissolving capacities compared to the modified MOW. The content of impregnation of chemicals would be affected with the degree of microfibrils produced by the modification treatment. Otherwise, dissolving capacities of chemicals depend on the affinity of the residual lignin in the paper.