• Convergence Security Journal
• /
• v.7 no.1
• /
• pp.77-82
• /
• 2007

Supporting Quality of Service (QoS) for multimedia services in heterogeneous mobile networks is a part of key issue for Beyond Three Generation (B3G) development. In particular, if QoS degradation are occurred because cell overload and error late patterns of wireless links during the transmission of multimedia data, the efficient QoS management is necessary to maintain the same QoS of transmitted multimedia data because the QoS may be defected by some delay and information loss. This paper deals with QoS Degradation reason Intra-System Handover (D-ISHO) for handling QoS of multimedia services over heterogeneous mobile networks. For this aim, the function modules for supporting QoS of D-ISHO are proposed. The sequence diagram showing interaction between the modules is described and then a scenario for D-ISHO is considered. Simulation is focused on the average delay and packet loss rate. The proposed heterogeneous mobile system using the QoS-Guaranteed Resource Management (QGRM) provides a better performance than each different access system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3B
• /
• pp.207-215
• /
• 2006

It has known that the handover based on MIP in mobile environments has many constraints for proving seamless service due to well hon problems. Although there has been researching for the solutions, such as MRSVP and HMRSVP etc, it is difficult to do the research related with QoS due to the issues based on MIP used as a seamless mobility. In this paper, the seamless provides in a mobility based on SCTP, which is applied by IntServ for end-to-end QoS service. The paper also proposes the path management scheme for saving reservation cost. the scheme searches a new path on the moving mobile terminal and reserves the resources on the path for providing seamless QoS service. The paper is also analyzed on the comparition between a SCTP based and MIP based solutions. the scheme is evaluated using the cost effect saved for resource reservation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.11-20
• /
• 2014

For Web-based applications in IoT environment, IETF CoRE WG has standardizing the CoAP. One of limitations of CoAP is that CoAP standard does not consider the mobility management of the CoAP sensor node. In this paper, we propose the mobility management protocol of CoAP sensor node by considering the characteristics of the constrained network. The proposed mobility management protocol supports for Web client to be transmitted the sensing data from CoAP node reliably while the CoAP sensor moves into different wireless networks. To do this, we designed the architecture with the separate IP address management of CoAP sensor node and presented the mobility management protocol, which includes the holding and binding mode, in order to provide the reliable transmission. Finally, the numerical analysis and simulation with NS2 tool have been done for the performance evaluation in terms of the handover latency and packet loss with comparing the proposed mobility management protocol with other the existing mobility management protocols. The performance result shows that the proposed mobility management can provide the transmission of sensing data without the packet loss comparing with the existing mobility management protocol reliably.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.2
• /
• pp.135-144
• /
• 2003

Traffic performance in a microcellular system is much more affected by cell dwell time and channel holding time in each cell. Cell dwell time of a call is characterized by its mobility pattern, i.e., stochastic changes of moving speed and direction. Cell dwell time provides important information for other analyses on traffic performance such as channel holding time, handover rate, and the average number of handovers per call. In the next generation mobile communication system, the cell size is expected to be much smaller than that of current one to accommodate the increase of user demand and to achieve high bandwidth utilization. As the cell size gets small, traffic performance is much more affected by variable mobility of users, especially by that of pedestrians. In previous work, analytical models are based on simple probability models. They provide sufficient accuracy in a simple second-generation cellular system. However, the role of them is becoming invalid in a picocellular environment where there are rapid change of network traffic conditions and highly random mobility of pedestrians. Unlike in previous work, we propose an improved probability model evolved from so-called Random walk model in order to mathematically formulate variable mobility of pedestrians and analyze the traffic performance. With our model, we can figure out variable characteristics of pedestrian mobility with stochastic correlation. The above-mentioned traffic performance measures are analyzed using our model.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.64-68
• /
• 2007

Commercial WiBro and 3G HSDPA services are launched last year in order to provide high speed wireless Internet access and multimedia service. Currently mobile communication service providers concentrate on the deployment of indoor mobile network since indoor traffic is remarkably increased. For fine indoor wireless communication, an installation of access point system via Public IP network which is called Femtocell is required. The development of indoor Femtocell system must be considered in the viewpoint of low hardware complexity, cost reduction, interlocking with WiBro/HSDPA network without change of network component and easy element management. In this paper, we review the implementation issue and technology of dual mode AP which provides WiBro and HSDPA signal to the user simultaneously. Especially, we describe on the HSDPA Femtocell standardization status and possible 3 types of HSDPA communication module development design. Furthermore we analyze the merits and demerits of each HSDPA Femtocell design type and propose a system which enables handover between indoor HSDPA Femtocell and outdoor commercial HSDPA mobile network.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.471-479
• /
• 2012

In cellular femto systems, femto Base stations(f-BSs) can be installed unnecessarily and overcrowded in small areas. This will cause an interference problem and it can impact on the capacity, blocking probability, and coverage of femtocells in the shared channel systems. In this paper, we propose a load distribution scheme by using forced handover and probabilistic subchannel scheduling policy to resolve the problem. The proposed scheme operates in distributed manner though communication with neighboring f-BSs, and includes self-detection of overcrowded area and radio resource management based on measurements. We evaluate the performance of the proposed scheme in terms of average cell throughput and average throughput per users.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.100-106
• /
• 2011

u-TSN is a promising technology facilitating road safety and traffic management for drivers and passengers. To deploy this technology in a real environment, personal information and communicated data should be protected against malicious adversaries. Even though such adversaries would appear relatively infrequently, in such cases, the benefits of u-TSN could be disrupted and disabled. Therefore, one of the ultimate goals in the design of secure u-TSN is to protect against attacks of malicious adversaries. In this paper, we present secure communication scenario for u-TSN and implement security protocols and algorithms that are the components of the scenario on an IXP425 board. The security systems, implemented as a security module, supports secure and efficient communication for the u-TSN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.285-297
• /
• 2016

In this paper, a centralized mmWave-based multi-spot beam cellular system architecture having such a base station equipped with a plurality of beam-forming antennas, multi-layered dynamic cell configuration method as one of key concepts of this system operation and a mobility management method based on it are introduced. To estimate the performance of new system, system simulation was performed under the ideal environment without blockage. These results show the possibility that system capacity can be dramatically increased and mobility performance similar to the existing cellular system may be achieved.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.279-284
• /
• 2013

Wireless access network section needs strong security which supports high data rate and mobility not to invade patient's privacy by exposing patient's sensitive biometric from automatic implantable device that is adapted to u-healthcare service. This paper builds test bed and performs assessment and measurement of security ability of WiMAX network to transmit and receive mobile patient's biometric by building WiMAX network in wireless access network not to expose paitne's biometirc at wireless access network section to the third person. Specially, this paper compares and assesses data security, MAC control message security, handover conection delay, and frame loss and bandwidth of ECDH at the layer of WiMAX security compliance, WiMAX MAC IPSec, and MAC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.510-519
• /
• 2019

The aim of this study was to set a defect classification framework and evaluate the defect risks in apartment buildings For this, approximately 15,056 defect items for 133 apartment buildings were examined. As a result of the analysis, the major defect of the RC work was cracks, which were found mainly in public locations. Moreover, the RC work was found to exhibit a high defect risk of water problem and surface appearance, which are highly connected with cracks. Second, the finish work has a high defect risk because it is composed of various work types, and there are many kinds of materials and construction parts involved. Third, the major defects of the waterproof work were incorrect installation and missing tasks, which have high defect risks in the garage. This is because defects that require rework occur mainly in the underground garage. Based on these results, this study proposed countermeasures for defect risk management to be considered in the construction, handover, post-handover, and occupancy phases. These have been set in detail based on the three zones: low frequency high severity (LFHS), low frequency low severity (LFLS), and high frequency low severity (HFLS).