• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.

• 한국환경보건학회지
• /
• 제49권5호
• /
• pp.247-250
• /
• 2023

This case report aims to introduce the safety campaign activities for preventing chemical accidents that were cooperatively conducted by an environmental office and chemical-handling workplaces located in the Ulsan area. A chemical safety campaign was initiated to examine and manage chemical-handling facilities at high risk for chemical accidents, specifically valves, flanges, and switches (VFS) from October 2020 to December 2022. The VFS safety check campaign was conducted to raise workers' safety consciousness based on a campaign of advertisements in the workplace from October 2020 to December 2021. In addition, a VFS plus [+] campaign was initiated to encourage actual management activities for chemical-handling facilities at high risk of chemical accidents in 2022. A total of 49 corporations participated in the VFS plus [+] campaign. In contrast to the VFS safety check campaign, which simply focused on publicity and resulted in changes in worker awareness, practicable safety management activities focusing on the handling facilities were carried out. Although notable short-term impacts have yet to be discerned from the campaigns, it is expected that they will eventually serve as a starting point for developing a proper safety culture and environment.

• Safety and Health at Work
• /
• 제12권3호
• /
• pp.416-420
• /
• 2021

Hazardous area classification design is required to reduce the explosion risk in process plants. Among the international design guidelines, only IEC 60079-10-1 proposes a new type of zone, namely zone 2 NE, to prevent explosion hazards. We studied how to meet the zone 2 NE grade for a facility handling hydrogen gas, which is considered as most dangerous among explosive gases. Zone 2 NE can be achieved considering the grade of release, as well as the availability and effectiveness of ventilation, which are factors indicative of the facility condition and its surroundings. In the present study, we demonstrate that zone 2 NE can be achieved when the degree of ventilation is high by accessing temperature, pressure, and size of leak hole. The release characteristic can be derived by substituting the process condition of the hydrogen gas facility. The equations are summarized considering relation of the operating temperature, operating pressure, and size of leak hole. Through this relationship, the non-hazardous condition can be realized from the perspective of inherent safety by the combination of each parameter before the initial design of the hydrogen gas facility.

• 한국산업보건학회지
• /
• 제22권4호
• /
• pp.265-275
• /
• 2012

Objectives: The aim of this study was to investigate the distribution patterns and exposure concentrations of biological hazards in waste handling industries. Methods: We selected 3 recyclable waste sorting plants(RWS), 2 food recycling plants(FR), 1 landfill area(LA) and 1 waste incineration plant(WI). Total airborne bacteria and fungi were measured with single stage impactor and gelatin filters. Endotoxin and glucan were measured with polycarbonate filters in total and respirable dust. Results: The geometric mean of airborne bacterial concentration was the highest in FR($3,273CFU/m^3$), followed by LA, RWS, and WI as 1,334, 934, and $860CFU/m^3$. The fungal concentrations were 6,031, 5,052, 3,307, and $713CFU/m^3$ in RWS, WI, FR, and LA, respectively. By process, WI pit showed the highest concentrations of bacteria, fungi, and endotoxin, followed by inside of bulldozer in LA. The indoor to outdoor ratios of bacteria, fungi, endotoxin and glucan were 2.3, 4.0, 2.3, and 5.0 in RWS, 29.5, 4.9, 7.6, and 5.0 in FR, 5.3, 8.7, 26.8, and 9.5 in WI, respectively. Conclusions: We found that biological hazards, specifically bacteria in FR, fungi in RWS and endotoxin in WI pit and bulldozer at LA, should be controlled to prevent worker's respiratory diseases.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.493-497
• /
• 2020

Hazardous area classification is designed to prevent chemical plant explosions in advance. Generally, the duration of the explosive atmosphere is used for zone type classification. Herein, IEC code, a quantitative zone type classification methodology, was used to achieve Zone 2 NE, which indicates a practical non-explosion condition. This study analyzed the operating pressure of a vessel handling propane to achieve Zone 2 NE by applying the IEC code via MATLAB. The resulting zone type and hazardous area grades were compared with the results from other design standards, namely API and EI codes. According to the IEC code, the operating pressure of vessels handling propane should be between 101325-116560.59 Pa. In contrast, the zone type classification criteria used by API and EI codes are abstract. Therefore, since these codes could interpret excessively explosive atmospheres, care is required while using them for hazardous area classification design.

• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.300-309
• /
• 2014

Objectives: The objective of this study is to evaluate microbial exposure hazards in the metal-working fluids(MWF) handling industry. Methods: Air quality parameters(airborne bacteria, fungi, endotoxin and oil mist) and bulk MWF in storage tanks were evaluated at 54 points at nine sites in South Korea. Results: The geometric means(GM) of culturable airborne bacteria, fungi, endotoxin and oil mist concentration were $133CFU/m^3$(n=376, range $7{\sim}6,510CFU/m^3$), $159CFU/m^3$(n=381, range $7{\sim}8,469CFU/m^3$), $8.06EU/m^3$(n=103, range $0.34{\sim}280.4EU/m^3$) and $0.20mg/m^3$(n=104, range $0.01{\sim}2.87mg/m^3$), respectively. The ratio of indoor to outdoor concentration was 2.7 for bacteria, 6.1 for endotoxin, and 4.8 for oil mist. Even though average airborne bacteria concentration did not exceed recommended exposure limits($1,000CFU/m^3$), MWF in the storage tanks was highly contaminated with bacteria(arithmetic mean $2.1{\times}10^6CFU/ml$) and exceeded recommended bacteria limits($10^5CFU/ml$). Conclusions: It is necessary for MWF handling workplaces to conduct periodical biohazard inspection of MWF storage tanks. Additionally, further research may be necessary to establish biological occupational exposure limits.

• Safety and Health at Work
• /
• 제8권1호
• /
• pp.11-18
• /
• 2017

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

• Safety and Health at Work
• /
• 제12권2호
• /
• pp.261-267
• /
• 2021

Background: The series of serious industrial accidents in recent years at contractors to large companies has highlighted risk outsourcing as a real and urgent problem. This study aims to review the difference in the degree of risk exposure and the occurrence of industrial accidents depending on the type of company relations. Among in-house contractors, the focus will be on those handling hazardous chemicals that include companies for which outsourcing requires approval. Methods: This study uses the 9th wave of the Industrial Safety and Health Survey (2018). For determining the degree of risk exposure, the occurrence of industrial accidents, and industrial accident rate, multivariate, logistic, and fractional logit, regression analyses were used, respectively. Results: First, In-house contractors' degree of risk exposure is higher than that of the client companies. In particular, this gap is even greater for companies dealing with chemicals. Second, among only those that handle hazardous chemicals, in-house contractors do show a significantly higher rate of industrial accident occurrence. Third, In-house contractors have a significantly higher rate of industrial accidents from diseases than client companies. Conclusion: The analysis supports the intent of the legal amendment that strengthens the protection of in-house contracted workers who handle hazardous chemicals. Second, the results of this study suggest that safety and health management must go beyond legal compliance and ensure that it has substance and effectiveness. Last, there should be policy consideration is necessary to reduce attempts to hide industrial accidents.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.282-289
• /
• 2017

Background: The objective of this study was to report on the prevalence of musculoskeletal pain in lobstermen in the northeast USA. Methods: Crews were randomly selected from those licensed to fish in Maine and Massachusetts and followed prospectively. The survey used a Nordic Musculoskeletal Questionnaire format to characterize musculoskeletal disorders. Results: A total of 395 individuals participated. One half of the respondents reported low back pain. Back pain was attributed to or exacerbated by lobstering. Low back pain was prevalent among both captains and sternmen, while sternmen reported more hand/wrist pain than captains. Multiple locations for pain were common in individual participants. Conclusion: Equipment or technology to assist material handling should be a priority, as the body segments with high prevalence of pain (back, hand/wrists, shoulders, knees) are all affected by the repetitive and forceful handling of the lobster traps.

• 한국환경보건학회지
• /
• 제42권6호
• /
• pp.419-429
• /
• 2016

Objectives: According to the new Chemical Control Act from the Korean Ministry of Environment (2014-259), workers handling hazardous chemicals should wear personal protective equipment (PPE). However the act simply states in basic phrases that every worker handling one or more of the 69 listed chemicals should wear PPE and does not consider the unique hazard characteristics of chemicals and work types. The main purpose of this study is to provide basic data to revise the act to suit particular work processes and situations. Methods: The hazard rank of the substances was classified based on hazardous characteristics such as LC50 and vapor pressure using matrix analysis. The workplace exposure risk of the substances was also determined through a matrix analysis based on the previously determined hazard ranks and the demands of manual handling together with the likelihood of accident frequency of the operation combined with the exposure of workers during spill accidents. Results: To meet the demands for developing subsequent guidelines for the risk-based application of PPE in hazardous workplaces, this study sorted the 69 listed chemicals into five hazardous categories based on their LC50 and vapor pressures, and also assigned exposure categories according to exposure vulnerability for various types of work which are frequently performed throughout the life cycle of the chemicals. Conclusion: In the next study, an exposure risk matrix will be produced using the hazard rank of chemicals and workplace exposure risk, and then PPE will be selected to suit the categories of the exposure risk matrix.