• 보존과학연구
• /
• s.22
• /
• pp.81-92
• /
• 2001

The replica experiment of golden bell excavated from the East Three-Story Pagoda at the Gamunsa temple was carried out in order to know the handiwork technique of ancient granule. The size of 0.3mm granule was attached to the golden bell which was 3.4mm bell body by soldering. When we tried to attach the granule by a modern metalwork, we could know that this technique was hard to make the replica bell. We could prove how to adhere strongly to the golden granule by tension testing. First of all, we made the soldering of the same composition as the golden bell excavated from the Gamunsa temple and then prepared specimens for testing to measure the tension strength. It showed that the broken position was not a soldering part. This result showed how the ancient granule could maintain without a break for a long time.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.13-24
• /
• 2010

This study examined each handiwork method of 4 filigree artifacts from Neungsan-ri temple site in Buyeo, Korea through material characteristic and microstructure analysis. As a result, it was indicated that all of the artifacts have comparatively higher purity than 22.7K and some of filigree artifacts showed that gold is alloyed with silver at a certain ratio. Gold thread that decorates surface showed thickness of 0.2~0.8mm and displayed various forms of section. Gold granule indicated that 2 or 3 granules are adhered together and they are 0.3~0.8mm in diameter. Trace of soldering was observed from gold thread and gold granule joints on surface and it confirmed a possibility of being soldering using gold solder through componential analysis. Also, it reveals a surface decorated with pigments such as cinnabar(HgS) and black.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.530-534
• /
• 2006

A great deal of handling time, expertise and huge investment are required to express oriental paintings three-dimensionally. This is because pictures are usually converted digitally and then reconstructed three-dimensionally. During this process we depend highly on expert's handiwork and specialized skills. This paper presents an idea to standardize the techniques that oriental pictures can be expressed as they are and a more effective method for their three-dimensional reconstruction.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1312-1315
• /
• 1996

Polishing work for a curved surface die demands simple and repetitive operations and requires much time while it also demands high precision. Therefore it is operated by skilled worker in handiwork. But workers avoid polishing work gradually because of the poor environments such as dust and noise. In order to reduce the polishing time and to alleviate the problem of shortage of skilled workers, researches for automation of polishing have been pursued in the developed countries such as Japan. In this research we develop a polishing robot with 2 degrees of freedom motion and pneumatic system, and attach it to machining center with 3 degrees of freedom to form an automatic polishing system which keeps the polishing tool vertically on the surface of die and maintains constant pneumatic pressure. The developed polishing robot is controlled by real time sliding mode control using DSP(digital signal processor). A synchronization between machining center and polishing robot is accomplished by using M code of machining center. A performance experiment for polishing work is executed by the developed polishing robot.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1355-1360
• /
• 2003

Currently, product of optical collimator for optical communication is depending on handiwork, and some companies are propelling semi-automatic system composite of manual and automatic operations. In this point of time, the importance of automatic system of optical collimator for optical communication is taking its place as a core technology in the development of parts with high-efficiency of optical communication. In order to develop such an optical collimator in this study, we designed an automatic assembly system, and developed a software for the system operation. At a result of that, we could carry out a single work process individually running processes of collimator fabrication, a constant work process constantly running all of the processes, and performance evaluation of the collimator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.743-747
• /
• 1997

Polishing work for a curved surface die demands simple and repetitive operations and requires much time while it also demands high precision. Therefore it is operated by skilled worker in handiwork. Howener workers avoid polishing work gradually because of the poor environments such as dust and noise. In order to reduce the polishing time and to alleviate the problem of shortage of skilled workers, researches for automation of polishing have been pursued in the developed countries. In the research, a polishing robot with 2 degrees of freedom motion attached to machining center with 3 degrees of freedom and pneumatic system forms an automatic polishing system which keeps the polishing tool vertically on the surface of die and maintains constant pneumatic pressure. A synchronization between machining center and polishing robot is accomplished by using M code of machining center. A rulled surface and shadow mask are polished by the developed polishing robot.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.71-76
• /
• 2022

The article aims to consider the role of computer technologies in contemporary jewelry art. The importance of computer programming, 3D-modeling and 3D-printing for the process of jewelry creating, its advertising and sales is emphasized. Both the positive features of the possibility of using computer technologies in jewelry and their shortcomings are considered. The process of changing the nature of jewelry design after the start of the use of digital technologies is highlighted. The issue of changing the perception and evaluation of a work of jewelry art, the creation of which uses mechanization, has been updated.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.109-117
• /
• 2000

In order to develope ship hull forms. many various models are represented numerically in terms of B-spline surfaces and tested experimentally in the towing tank. It is very difficult to make various ship hulls with free forms in handiwork. As the first step of development of a free form cutting machine which becomes a good substitute for high-priced model cutting machines, free forms representation for model cutting are developed. In this paper, NURBUS surfaces are represented on the assumption that data points may be control points contrary to existing methods.

• Archives of design research
• /
• v.14 no.4
• /
• pp.157-165
• /
• 2001

The method to make ceramic pigments for 4 colour instead of ink in the process of the of set-printing and put them on the decal paper in the ceramic industry has been used to produce complicated images such as photographs or famous masterpieces. Offset-printing which is the production method for mass production, had enough worth to suffer the past high price of the production line. But today it is not suitable for the production method of small quantity and many kinds corresponding to needs for the various tastes and designs of consumers. Therefore I will put 4 colour printing method on the silkscreen, handiwork, suitable for the production method for small quantities and many variations to develop the methods that permit to cost effectively reproduce complex, high resolution, multicolor images. The study is expected to give value to ceramists who do various works and to be offered as the foundation in the field of design and expression.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.163-177
• /
• 1999

Polishing work for a curved surface die demands simple and repetitive operations and requires much time while it demands also high precision. Therefore it is operated by a skilled worker in handiwork. However the workers avoid gradually a polishing work because of the poor environmental conditions such as dust and noise. In order to reduce the polishing time and to alleviate the problem of shortage of skilled workers, an automatic polishing robot system which is composed of a polishing robot with two degrees of freedom motion and pneumatic system is developed, and it is attached to machining center with three degrees of freedom. The system keeps the polishing tool vertically on the surface of die and maintains constant pneumatic pressure. The polishing robot with DSP(digital signal processor) controller is controlled by sliding mode control. A synchronization between machining center and polishing robot is accomplished by using M code of machining center. A performance experiment for polishing work is executed by the developed automatic polishing robot system. The result shows that the developed automatic polishing robot has a good performance and well polished workpiece surface is obtained.