• 제목/요약/키워드: half line

검색결과 656건 처리시간 0.025초

롱라인 공법으로 제작한 반단면 프리캐스트 콘크리트 합성 슬래브의 휨강도 평가 (Flexural Strength Estimation of Half-Depth Precast Concrete Composite Slab Manufactured by the Long-Line Method)

  • 최진우;서수홍;주형중;윤순종
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권4호
    • /
    • pp.48-56
    • /
    • 2013
  • 프리텐션 방식을 사용한 PSC 휨부재는 시공이 간편하고 품질관리가 용이하기 때문에 최근 토목분야에서 적용된 사례가 증가하고 있다. 특히, PSC 휨부재의 종류 중 하나인 반단면 프리캐스트 콘크리트 합성 슬래브는 롱라인 공법을 적용하여 최근에 개발되었다. 반단면 프리캐스트 콘크리트 합성 슬래브는 프리캐스트 콘크리트와 현장타설 콘크리트를 합성하여 제작한다. 이 연구에서는 롱라인 공법으로 제작한 프리캐스트 PSC를 적용한 반단면 프리캐스트 콘크리트 합성 슬래브의 프리스트레스 도입 효율과 휨강도에 대한 실험을 실시하고 그 결과를 제시하였다. 롱라인 공법은 한번의 긴장력 도입으로 여러 개의 부재를 생산할 수 있는 장점이 있다. 또한, 프리캐스트 PSC 내에 매입되어 있는 철근의 영향을 고려하여 반단면 프리캐스트 콘크리트 합성 슬래브의 휨강도를 합리적으로 평가할 수 있는 식을 제시하였다.

EBG 구조를 이용한 반파장 저역통과 여파기 설계 (Design of Half-Wavelength Low-PASS Filter using EBG Structure)

  • 강명수;김영태;박준석
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.376-379
    • /
    • 2003
  • In this raper, proposed easy half-wavelength LPF and acceptor structure in actuality manufacture using EBG (Electromagnatic Bandgap) structure for application of micro-strip circuit. Because conventional half-wavelength LPF and acceptor is narrow line-width of High impedance, actuality manufacture is difficult. Width that in proposed structure narrow microstrip line of High impedance EBG structure use and has equal impedance embodied to wide microstrip line. Also, it is seen that actuality manufacture is available applying to half-wavelength LPF that have cut-off Frequency of 3GHz.

  • PDF

MULTIPLE SOLUTIONS OF IMPULSIVE BOUNDARY VALUE PROBLEMS ON THE HALF-LINE

  • Liu, Xiyu;Yan, Baoqiang
    • Journal of applied mathematics & informatics
    • /
    • 제5권1호
    • /
    • pp.111-124
    • /
    • 1998
  • Existence results of multiple solutions are obtained un-der suitable conditions for impulsive integrodifferential boundary value problems on the half-line which may be singular at the boundary.

π-형 전송선 급전 구조를 갖는 대역 통과 필터 (A Band Pass Filter with Feeding Structure Using π-Type Transmission Line)

  • 배주석;임종식;김귀수;안달
    • 한국전자파학회논문지
    • /
    • 제19권2호
    • /
    • pp.114-120
    • /
    • 2008
  • 본 논문에서는 일반적인 반 파장 평행 결합 선로 대역 통과 필터의 입 출력 결합 선로를 K-인버터로 변환하고, K-인버터를 $\pi$-형 전송선 등가로 대체함으로써 $\pi$-형 전송선 급전 구조를 갖는 구조의 대역 통과 필터를 제안하였다. 이 방법은 반 파장 결합 선로 대역 통과 필터의 입 출력 결합 선로 구현 문제에 대한 해결 방안을 제시한다. 또한, 기존의 탭 선로(tapped line) 구조의 설계 방법에 비해 설계 식이 매우 간단하고 정확하여, 특성의 적정화를 위한 노력과 시간을 상당히 줄일 수 있다. 제안된 이론을 바탕으로 $\pi$-형 전송선 급전 구조를 갖는 구조의 대역 통과 필터를 설계 및 제작하였고, 그 결과로부터 제안 방법의 타당성을 입증하였다.

보문분지 구조파악을 위한 지구물리탐사 (A Geophysical Study for the Subsurface Structure of the Bomun Basin)

  • 서만철;윤혜수
    • 지구물리
    • /
    • 제3권1호
    • /
    • pp.67-74
    • /
    • 2000
  • 보문분지의 대체적인 분지구조를 밝히기 위해 분지를 동서로 횡단하는 측선 Line-1, 분지의 동측 경계를 횡단하는 측선 Line-2, 분지내부의 측선 Line-3을 설정하고, 측선 Line-1에서는 자력탐사와 방사능탐사, 측선 Line-2에서는 방사능 탐사, 측선3에서는 탄성파탐사를 실시하였다. 자력 및 방사능탐사 결과, 측선 Line-1을 따라 측선의 기점 서측 2.55 km, 동측 1.6 km에서 이상값을 보이고, 측선2에서는 방사능값이 1.9 km에서 급격한 변화를 나타내고 있으며, 이 급격한 변화는 지질도상의 분지경계부와 정확히 일치한다. 자력탐사 결과, 백악기 기반암지역은 높은 자력이상$(200\;{\sim}\;500\;nT)$, 보문분지 내에서는 상대적으로 낮은 자력이상$(-100\;{\sim}\;+100\;nT)$을 보여 대조적인 특성을 보인다. 또한 방사능강도에서도 뚜렷한 차이를 보여 백악기 기반암지역은 보문분지지역에 비하여 상대적으로 낮다. 보문분지 내의 자력이상치는 서쪽이 낮고 동쪽이 높은 형태를 보여 분지구조가 서쪽이 깊고 동쪽으로 얕아지는 반지구형임을 나타낸다. 또한 보문분지의 서측 경계부의 기존의 흑색셰일로 표기되었던 백악기 기반암지역이 높은 자력이상치와 낮은 방사능강도를 보여 화산암일 가능성이 높은 것으로 판명된다. 탄성파탐사 결과 측선3지역에서는 455 m/s, 1904 m/s, 2662 m/s의 속도를 갖는 지층들이 존재하머, 심부 지층구조는 서쪽으로 $2.3^{\circ}$ 기울어진 경사구조로 해석된다. 이러한 해석은 자력이상곡선으로부터 해석된 서쪽이 깊고 동쪽으로 얕아지는 반지구형(half-graben)모델과 일치 한다.

  • PDF

Line Transect에서 발견율함수 추정에 사용되는 모델에 따른 상괭이, Neophocaena phocaenoides의 자원개체수 추정 (Abundance Estimation of the Finless Porpoise, Neophocaena phocaenoides, Using Models of the Detection Function in a Line Transect)

  • 박겸준;김장근;장창익
    • 한국수산과학회지
    • /
    • 제40권4호
    • /
    • pp.201-209
    • /
    • 2007
  • Line transect sampling in a sighting survey is one of most widely used methods for assessing animal abundance. This study applied distance data, collected from three sighting surveys using line transects for finless porpoise that were conducted in 2004 and 2005 off the west coast of Korea, to four models (hazard-rate, uniform, half-normal and exponential) that can use a variety of detection functions, g (x). The hazard-rate model, a derived model for the detection function, should have a shoulder condition chosen using the AIC (Akaike Information Criterion), as the most suitable model. However, it did not describe a shoulder shape for the value of g(x) near the track tine and underestimated g (x), just as the exponential model did. The hazard-rate model showed a bias toward overestimating the densities of finless porpoises with a higher coefficient of variation (CV) than the other models did. The uniform model underestimated the densities of finless porpoise but had the lowest CV. The half-normal model described a detection function with a shape similar to that of the uniform model. The half-normal model was robust for finless porpoise data and should be able to avoid density underestimation. The estimated abundance of finless porpoise was 3,602 individuals (95% CI=1,251-10,371) inshore in 2005 and 33,045 individuals (95% CI=24,274-44,985) offshore in 2004.

사일리지용 옥수수의 수확기 결정을 위한 옥수수 낱알의 밀크라인 이용 (Using the kernel milk line for harvesting corn for silage)

  • 신정남;김병호
    • 한국초지조사료학회지
    • /
    • 제14권1호
    • /
    • pp.57-63
    • /
    • 1994
  • We use a variety of methods to determine the optimum time for havesting corn for silage. In addition, adequate dry matter for silage must be considered along with maturity stage. The objective of this study was to evaluate using the kernel milk line to determine when to harvest com for silage in 1992 on the Livestock Experimental F m , Keiymung Junior College at Keongsan, Keongsangbukdo. Four hybrids were field grown and com plants were harvested at various stages of kernel development so that kemel milk line movement could be analyzed whilc the corn was in the premature stages. As the plants approached maturity, the ears were collected from each of the hybrids and the position of the milk line wa5 noted. Then the whole plants were chopped and the content of DM was determined. The milk line was a readily identifiable feature of maturing com kemels. We focused on the five development \tage\. The fint was "soft dough". The second was "dent". The third wa, "75% milk". and the fourth wa5 "half milk". The half milk occurs when the milk line is positioned falf way down the kemel face. and the final stages win "no milk", milk disappearance as indicators of physiological maturity in maix. Milk free stage of the kemel occurred from I to 3 days prior to black layer having developed. The range for harvesting com for silage occurs a kemels mature from 75% milk to no milk. Position of milk line was easy to see. and can be used as a visible indicator to determine com matunty stage\ and whole plant dry matter. Whole plant dry matter increased with advancing maturity. averaged over hybrids it was 24.1, 25.6. 28.5. 34.6 and 39.0% at soft dough, dent, 75% milk. half milk and no milk. Milk line was more usehl indicator in monitoring corn maturity prior to physiological maturity.ing corn maturity prior to physiological maturity.

  • PDF

ON THE INVERSE PROBLEM FOR STURM-LIOUVILLE OPERATOR WITH A NONLINEAR SPECTRAL PARAMETER IN THE BOUNDARY CONDITION

  • Mamedov, Khanlar R.
    • 대한수학회지
    • /
    • 제46권6호
    • /
    • pp.1243-1254
    • /
    • 2009
  • The inverse scattering problem is investigated for some second order differential equation with a nonlinear spectral parameter in the boundary condition on the half line [0, $\infty$). In the present paper the coefficient of spectral parameter is not a pure imaginary number and the boundary value problem is not selfadjoint. We define the scattering data of the problem, derive the main integral equation and show that the potential is uniquely recovered.