• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.647-651
• /
• 2011

In this letter, non-regenerative Amplify-and-Forward (AF) relay systems based on half and full duplex schemes are investigated and their performance is analyzed and compared in terms of outage probability. Although the AF relay systems have been widely investigated in many previous literatures, most of them adopted a half duplex scheme due to hardware limitation and mathematical tractability. To the best of our knowledge, this letter is the first study to investigate the performance of the full duplex AF relay system considering practical hardware limitations. In full duplex AF relay systems, it is important to secure the isolation between transmit and receive antennas. Our numerical and simulation results show that there exists a threshold point of the isolation gain that the full duplex relay system outperforms the half duplex relay system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.583-587
• /
• 2015

In this study, a half-duplex mutual communication device via human skin was developed. Frequency-shift keying (FSK) digital modulation and demodulation control were used to transmit and receive data. Data communication through the human body is an effective communication technique and has high-grade security characteristics. In addition, making contact is a natural instinct of humans. Transmitting data through the human body is currently a highly conspicuous technology, because recently a lot of commercial sensors for humans have been developed. A body area network (BAN) can be easily constructed by this communication method on human skin. In this study, a half-duplex FSK mutual communication device was developed using a commercial FSK modulator and demodulator. A special control switching circuit and communication sequence were developed for mutual communication through human skin.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1311-1324
• /
• 2019

In the traditional cellular network communication, the cellular user and the base station exchange information through the uplink channel and downlink channel. Meanwhile, device-to-device (D2D) users access the cellular network by reusing the channel resources of the cellular users. However, when cellular user channel conditions are poor, not only D2D user cannot reuse its channel resources to access the network, but also cellular user's communication needs cannot be met. To solve this problem, we introduced a novelty D2D communication mechanism in the downlink, which D2D transmitter users as half-duplex (HD) relays to assist the downlink transmission of cellular users with reusing corresponding spectrum. The optimization goal of the system is to make the cellular users in the bad channel state meet the minimum transmission rate requirement and at the same time maximize the throughput of the D2D users. In addition, i for the purpose of improving the efficiency of relay transmission, we use two-antenna architecture of D2D relay to enable receive and transmit signals at the same time. Then we optimized power of base station and D2D relay separately with consideration of backhaul interference caused by two-antenna architectures. The simulation results show that the proposed HD relay strategyis superior to existing HD and full-duplex (FD) models in the aspects of system throughput and power efficiency.

• KIISE Transactions on Computing Practices
• /
• v.22 no.8
• /
• pp.381-386
• /
• 2016

Recently full-duplex communication in wireless networks is enabled by the advancement of self-interference cancellation technology. Full-duplex radio is a promising technology for next-generation wireless local area networks (WLAN) because it can simultaneously transmit and receive signals within the same frequency band. Since legacy medium access control (MAC) protocols are designed based on half-duplex communication, they are not suitable for full-duplex communication. In this paper, we discuss considerations of full-duplex communication and propose a novel full-duplex MAC protocol. We conducted a simulation to measure the throughput of our MAC protocol. Through the simulation results, we can verify that significant throughput gains of the proposed full-duplex MAC protocol, thus comparing the basic full-duplex MAC protocol.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.522-528
• /
• 2014

A UHF/VHF full-duplex communication using monopole and dipole antenna has been widely used for cube satellite applications. This kind of communication system requires a dedicated structure panel for antenna integration, which is the one of the disadvantages of the conventional communication system from the accommodation point of view considering the extremely limited volume of the cube satellite. In this study, to maximize the accommodation efficiency of the cube satellite, the commercial UHF half-duplex antenna combined with buck converter for communication modes transition has been considered in the communication system design. Its effectiveness has been verified through link budget analysis based on the antenna specifications and satellite's operation conditions. In addition, the antenna deployment mechanism for the synchronous release of multi-antennas has also been introduced.

• Journal of the military operations research society of Korea
• /
• v.2 no.1
• /
• pp.185-194
• /
• 1976

A terminal response time analysis for a general class of terminals-to-computer subsystem is presented in this paper. On the point of the front view, it should be considered for R.O.K. Military Defense to set up the communication network in order to facilitate for the currency of the information and the data communication system. The model used to study is based on the advanced data communications system in which terminals are connected to Terminal Control Units(TCU) that are in turn connected to local Front-End Processor(FEP). The line control procedures used to interface a TCU and an FEP may be half-duplex Binary Synchronous Communication(BSC), half-duplex Synchronous Data Link Control(SDLC), or full-duplex SLDC. This paper will contribute to facilitate the initial phase of system design and configuration for the Military Defense Communication Network System in future.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.41-48
• /
• 2020

Currently, the industry uses MODBUS communication method using RS485 as a communication method used when constructing distributed equipment and networks. However, this method has a rather good transmission and reception distance, but has a disadvantage of being a half-duplex communication method. Therefore, there is a great need for a full-duplex communication method that can simultaneously transmit and receive two-wire communications. Therefore, in this paper, we propose a new communication hardware equipment that can implement full-duplex communication method by communication signal level to overcome the disadvantage of communication speed. The proposed communication hardware is a structure that can transmit and receive at the same time on the same communication line in two equipments communicating in a two-wire system. The characteristic of this communication hardware is that the transmitter generates two-level signal for data transmission, but the receiver generates three-level electric signal according to the status of the transmission data generated by the receiver. The data transmission signal information of the receiver is present at the same time. Therefore, the receiving side can analyze the received signal based on the information on the current transmission signal and can analyze the signal only in the two communicating devices, so it can be seen that the communication security is very excellent.

• Journal of information and communication convergence engineering
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2014

In multi-hop communication systems, two-way relaying is one of the solutions to mitigate the spectral efficiency loss caused by a half-duplex transmission. In this paper, a simple two-way relaying scheme is proposed for two-hop two-user multiple input multiple output (MIMO) systems. In the proposed system, a base station and a relay station (RS), both equipped with two antennas, form a point-to-point MIMO channel, while the RS and two single-antenna mobile users form a point-to-multipoint multiuser (MU)-MIMO channel. Numerical examples show that the proposed system achieves a significant sum rate gain as compared to a one-way relaying system as the distance between a relay and the two users decreases. We also show that although we can expand the proposed scheme to more than two users, its performance gain as compared to that of one-way relaying decreases with an increase in the number of users.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.583-585
• /
• 2016

The recent advances in wireless networks area have led to new techniques, such as small cells or full-duplex (FD) transmission, have also been developed to further increase the network capacity. Particularly, full-duplex communication promises expected throughput gain by doubling the spectrum compared to half-duplex (HD) communication. Because this technique permits one set of frequencies to simultaneously transmit and receive signals. In this paper, we focus on the binary power control for the users and the base stations in full-duplex multiple cellulars wireless networks to obtain optimal sum-rate under the effect interference and noise. We investigate with a scenario in there one carrier is assigned to only one user in each cell and construct a model for this problem. In this work, we apply the binary power control by the its simplification in the implemented algorithm for both uplink and downlink simultaneously to maximize sum data rate of the system. At first, we realize the 2-cells case separately to check the optimal power allocation whether being binary. Then, we carry on with N-cells case in general through properties of binary power control.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.108-125
• /
• 2015

We propose a new time-division half-duplex estimate-and-forward (EF) relaying strategy suitable for a relay with mobility. We reconfigure EF relaying to guarantee a strong relay-destination link which is required to achieve a high rate using EF relaying. Based on the reconfigured model, we optimize the relaying strategy to attain a high rate irrespective of the relay position with preserving the total transmit bandwidth and energy. The proposed relaying strategy achieves high communication reliability for any relay position, which differs from conventional EF and decode-and-forward (DF) relaying schemes.