• 제목/요약/키워드: hBD-2

검색결과 99건 처리시간 0.027초

차나무 겹둥근무늬병 방제용 미생물제제 개발을 위한 길항세균 Bacillus subtilis BD0310의 대량배양 최적조건 (Optimum Cultivation Conditions for Mass Production of an Antagonistic Bacterium Bacillus subtilis BD0310 for Development of a Microbial Agent Controlling Gray Blight of Tea Plants)

  • 김경희;오순옥;허재선;염규진;고영진
    • 식물병연구
    • /
    • 제12권2호
    • /
    • pp.85-90
    • /
    • 2006
  • 차나무 겹퉁근무늬병을 일으키는 Pestalotiopsis longiseta에 대하여 강력한 길항능력을 나타내는 Bacillus subtilis BD0310 균주의 대량배양을 위한 배양조건과 P. longiseta에 대한 항균활성을 증대시킬 수 있는 탄소원과 질소원을 선발하였다. B. subtilis BD0310 균주를 대량배양하기 위한 최적온도 및 시간은 $30^{\circ}C$, 24 시간인 것으로 확인되었으며, 초기 최적 pH 는 7 로 확인되었다. B. subtilis BD03l0 균주를 대량으로 배양할 경우 P. longiseta에 대한 항균활성을 가장 높게 증가시키는 탄소원을 선발하기 위하여 fructose, galactose, glucose, glycerol, inositol, lactose, maltose, sorbitol, starch 등 9 가지 탄소원을 사용하여 조사한 결과 maltose와 inositol이 가장 효율적인 탄소원으로 선발되었으며, casein, tryptone, malt extract, yeast extract, $(NH_4)_2SO_4$등 5 가지 질소원 중에서 yeast extract와 tryptone이 가장 효율적인 질소원으로 선발되었다. 이러 한 결과들은 길항세균 B. subtilis BD0310를 차나무 겹둥근무늬병 방제용 미생물제제로 개발하기 위한 대량배양생산 공정을 확립하는데 기여할 것으로 전망된다.

전방향성 E & H면 슬릿 Folded형 마이크로스트립 패치 안테나 (Slit Folded Type Microstrip Antenna for Omnidirectional E-plane and H-plane)

  • 김종래;우종명;오승엽
    • 한국전자파학회논문지
    • /
    • 제13권9호
    • /
    • pp.956-963
    • /
    • 2002
  • 본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 compact한 slit-folded형 마이크로스트립패치 안테나를 제작하였다 기존의 길이 방향의 $\lambda_{g}/2$ 공진을 이용한 평면형 마이크로스트립패치 안테나를 길이방향 중심에서 반으로 접어서 마이크로스트립 급전선으로 급전하여 전방향성 방사패턴을 얻은 Folded형 마이크로스트립 안테나를 적층형으로 제작시 급전선의 영향을 줄이기 위하여 급전방법을 상하면 패치사이의 접지면 위에 설계하여 급전핀을 세웠다. 또한 평면형 H형 SIR 구조를 Folded형 안테나에 적용한 슬릿 folded형 안테나는 기존의 folded형 안테나에 비하여 27.5 % 더 소형화하였다. 기존의 folded형 마이크로스트립 안테나는 E면(zx-plane)과 H면(xy-plane)의 평균이득이 거의 1.8 dB 정도의 차이를 보였으나 본 논문에서 제안한 슬릿 folded형은 E & H-plane의 평균이득차이가 0.1 dB로 거의 같음을 알 수 있다.

By-pass Dust를 첨가한 혼합 시멘트의 수화 및 기계적 특성 (Hydration and mechanical properties of Blended Cement added Bypass dust)

  • 성진욱;나종윤;김창은;이승헌;이봉한;김수룡;류한웅
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
    • /
    • pp.33-39
    • /
    • 1999
  • This study was conducted to confirm the effect of bypass dust on the hydration and mechanical properties of the cement pastes and mortar obtained from ordinary Portland cement (OPC), OPC-slag and OPC-fly ash system. The rate of heat evolution is accelerated with the content of By-pass Dust(BD). total heat evolution increased because alkali-chlorides activated the hydration of blended cement. Compressive strength and bound water content show maximum value at 5wt% By-pass Dust(BD) on each curing time in ordinary Portland cement and slag blended cement. Ca(OH)2 content of Ordinary Portland Cement increased as the content of BD and curing time. In blended cement, the formation of Ca(OH)2 is active at early hydration stage. By pozzolanic reaction, the content of Ca(OH)2 is decreased as curing time goes by. According to the BD content stable chlorides complex of Friedel's salt (C3A·CaCl2·10H2O) is created. Due to the hydration activation effect of chlorides and alkali we observed Type II C-S-H, which developed into densest microstructure.

  • PDF

짧은 주기의 근접쌍성 BD And의 측광 및 그 분석을 통하여 살펴 본 RS CVn형 쌍성의 성질과 그 천체물리학적 의미

  • 김천휘;송미화;윤요나;한원용;최용준
    • 천문학회보
    • /
    • 제37권1호
    • /
    • pp.55.1-55.1
    • /
    • 2012
  • 2010년과 2011년의 관측시즌에 총 23일의 BVR 측광 관측을 통하여 처음으로 얻은 2세트의 BVR 광도 곡선을 분석하였다. 새로운 두 세트의 BVR 광도곡선은 제1식과 제2식의 깊이가 거의 비슷하지만, 식바깥 부분에서 관측 시즌에 따라 서로 다른 모양의 잘 발달된 파형 모양을 보인다. 이는 BD And가 흑점이 활동이 매우 심한 짧은 주기의 RS CVn형 식쌍성임을 나타내는 것이다. 우리의 극심시각을 포함한 모든 극심시각을 분석하여 BD And의 공전주기가 규칙적으로 변하는 것을 발견하였다. 이 변화를 보이지 않는 제3천체에 의한 광시간 효과로 가정하여, 궤도이심율이 0.83이며, 9.15년의 주기를 가진 광시간 궤도를 결정하였다. Wilson-Devinney 쌍성 모형을 이용하여 흑점과 제3광도를 고려한 두 세트의 광도곡선 해를 산출하였고, BD And의 절대량을 구하였다. 식바깥의 파형 모양의 변화는 주성의 표면에 매우 큰 두 개의 흑점과 그 위치와 이동으로 잘 설명되며, 전체 광도의 약 15%에 해당되는 제3광도가 검출되었다. 주기연구에서 구한 제3천체의 궤도요소와 제3광도의 결합으로 제3천체의 질량과 궤도경사각을 유추하였다. BD And의 성분별의 평균 나이가 등연령 곡선으로부터 태양과 비슷한 4.6${\times}$109년으로 산출되었다. BD And를 포함하여 현재까지 알려진 짧은 주기의 RS CVn형 쌍성들의 H-R도가 항성진화 경로와 함께 제시되며, 그 천체물리학적 의미를 살펴본다.

  • PDF

바이오디젤용 저온 유동성 향상제로서의 폴리 (알킬메타크릴레이트-공-무수말레인산) 제조 연구 (A Study on The Preparation of Poly(alkyl methacrylate-co-maleic anhydride) as Cold Flow Improvers for Biodiesel Fuels)

  • 홍진숙;정근우;김영운;김남균;임대재
    • 공업화학
    • /
    • 제23권2호
    • /
    • pp.232-240
    • /
    • 2012
  • 바이오디젤(BD)은 식물성 오일 또는 동물성 지방과 같이 재생산 가능한 원료로부터 유래된 긴 사슬 지방산의 단일 알킬에스테르로, 디젤연료에 비해 낮은 온도에서 연료특성이 열악한 것으로 알려져 있다. 디젤연료의 경우, 많은 저온 유동성 향상제가 개발되어 있지만 바이오 디젤은 디젤연료와 주요 구성성분이 다르기 때문에 디젤연료용 저온 유동성 향상제를 바이오디젤에 사용 시 저온 유동성 향상에 한계가 따른다. 이에 본 연구는 동절기에 바이오디젤의 저온 특성을 향상시키고자 에스테르 반응으로 합성한 알킬 메타크릴레이트 단량체(Stearyl methacrylate, Lauryl methacrylate)와 무수말레인산을 이용하여 저온 유동성 향상제를 합성하였고, 알킬아민을 이용한 개환 반응을 실시하였다. 이렇게 합성된 저온 유동성 향상제를 $^1H-NMR$ 및 FT-IR을 통해 분석하였으며, GPC로 분자량을 측정한 후 SoybeanBD와 PalmBD에 1000~10000 ppm의 농도로 첨가하여 저온특성을 조사하였다. 그 결과 SoybeanBD에 LMA2SMA6MA2-C8A 공중합체 첨가 시 유동점이 $12.5\;^{\circ}C$ 강하됨을 확인하였다.

NHPP 기반의 신뢰성 성장 예측 모델에 대한 민감도 분석 (Sensitivity Analysis for Reliability Growth Projection Model based on NHPP)

  • 조강훈;이홍철;장중순;박상철
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제16권4호
    • /
    • pp.305-312
    • /
    • 2016
  • Purpose: The purpose of this study is to provide a sensitivity analysis of system reliability for recognizing effectiveness of changing of BD mode failures using reliability growth projection model based on NHPP. Methods: Crow extended reliability projection model (CERPM) is used to analyze the changing of two factors 1) the number of BD mode failures, 2) fix effectiveness factor (FEF) values. Results: The system reliability has increased in accordance with the number of BD mode failures and FEF values have increased. Conclusion: It is necessary to design failure modes and FEF values to supervise the reliability.

New Fluorescent Blue OLED Host and Dopant Materials Based on the Spirobenzofluorene

  • Lee, In-Ho;Gong, Myoung-Seon
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권5호
    • /
    • pp.1475-1482
    • /
    • 2011
  • New spiro[benzo[c]fluorene-7,9'-fluorene] (SBFF)-based blue host materials, 9-phenyl-SBFF (BH-4P) and 5,9-diphenyl-SBFF (BH-6DP), were successfully prepared by spiro-formation of 9-phenyl-7H-benzo[c]fluoren-7-one with 2-bromobiphenyl via lithiation and reaction of 5,9-dibromo-SBFF with phenylboronic acid through the Suzuki reaction, respectively. Diphenyl-[4-(2-[1,1;4,1]terphenyl-4-yl-vinyl)-phenyl]-amine (BD-1) and N,N-diphenyl-N',N'-diphenyl-SBFF-5,9-diamine (BD-6DPA) were used as dopant materials. Blue OLEDs with the configuration ITO/N,N'-bis-[4-(di-m-tolylamino)phenyl]-N,N'-diphenylbiphenyl-4,4'-diamine (DNTPD)/bis[N-(1-naphthyl)-N-phenyl]benzidine (NPB)/host:5% dopant/SFC-137/Al-LiF were prepared from the two host materials doped with BD-1 and BD-6DPA dopants and the devices composed of BH-4P and BH-6DP doped with BD-6DPA showed blue EL spectra at 458 and 463 nm at 7 V and luminance efficiencies of 4.58 and 4.88 cd/A, respectively.

Evaluation of 2,3-Butanediol Production from Red Seaweed Gelidium amansii Hydrolysates Using Engineered Saccharomyces cerevisiae

  • Ra, Chae Hun;Seo, Jin-Ho;Jeong, Gwi-Taek;Kim, Sung-Koo
    • Journal of Microbiology and Biotechnology
    • /
    • 제30권12호
    • /
    • pp.1912-1918
    • /
    • 2020
  • Hyper-thermal (HT) acid hydrolysis of red seaweed Gelidium amansii was performed using 12% (w/v) slurry and an acid mix concentration of 180 mM at 150℃ for 10 min. Enzymatic saccharification when using a combination of Celluclast 1.5 L and CTec2 at a dose of 16 U/ml led to the production of 12.0 g/l of reducing sugar with an efficiency of enzymatic saccharification of 13.2%. After the enzymatic saccharification, 2,3-butanediol (2,3-BD) fermentation was carried out using an engineered S. cerevisiae strain. The use of HT acid-hydrolyzed medium with 1.9 g/l of 5-hydroxymethylfurfural showed a reduction in the lag time from 48 to 24 h. The 2,3-BD concentration and yield coefficient at 72 h were 14.8 g/l and 0.30, respectively. Therefore, HT acid hydrolysis and the use of the engineered S. cerevisiae strain can enhance the overall 2,3-BD yields from G. amansii seaweed.

Control of Mechanical Properties of Polyurethane Elastomers Synthesized with Aliphatic Diisocyanate Bearing a Symmetric Structure

  • Kojio, Ken;Nozaki, Shuhei;Takahara, Atsushi;Yamasaki, Satoshi
    • Elastomers and Composites
    • /
    • 제54권4호
    • /
    • pp.271-278
    • /
    • 2019
  • Polyurethane elastomers (PUEs) were synthesized using trans-1,4-bis(isocyanatomethyl) cyclohexane (1,4-H6XDI), poly(oxytetramethylene) glycol, 1,4-butanediol (BD), and 1,1,1-trimethylol propane (TMP). To control the molecular aggregation state and mechanical properties of these PUEs, hard segment contents of 20 and 30 wt% and BD/TMP ratios of 10/0 and 8/2 were chosen. Differential scanning calorimetry and small-angle X-ray scattering measurements revealed that the degree of microphase separation increased with an increase in both hard segment content and BD ratio. The Young's modulus and strain at break of the 1,4-H6XDI-based PUE were 6-20 MPa and 5-15, respectively. Incorporation of 20% TMP as a cross-linking agent into BD increased the melting temperature of the hard segment chains, that is, heat resistance, and decreased the Young's modulus. This could be due to the low density of the physical cross-linking network and the dispersion of hard segment chains in the soft segment matrix in the PUE in the presence of 20% TMP.

Staphylococcus aureus에서 분리된 plasmid상의 항생물질 저항성 인자에 관한 연구 : Chloramphenicol 저항성 인자의 클로닝 (Studies on antibiotics resistance gene in Staphylococcus aureun Plasmid: Cloning of chloramphenicol resistance determinant)

  • 권동현;김영선;변우현
    • 미생물학회지
    • /
    • 제24권4호
    • /
    • pp.341-351
    • /
    • 1986
  • 항생제에 대하여 다중 저항성을 갖는 Shaphylococcus aµreus D-H-1으로부터 chloram phenicol(Cm) 저항성 유전자를 가진것으로 확인된 R-plasmid(pSBK203, 2.5MdaJ.)를 분리하여 Bacillus subtilis BD 170 내에셔 발현시켰으며 이 Cm 저항성 유전자를 cloning하기 위하여 pSBK203상의 제한효소 인식부위를 결정하였다. pSBK203 상의 TaqI 부분 절편 0.3 kb을 pBD9 CZaI 인식부위내에 삽입하여 얻은 재조합 plasmid(pTQ16)와 TaqI부 분절편과 O.lkb 엇갈럼이 있는 RsaI 단일절떤(1. 3 kb} pBR322의 Seal 인식부위에 삽입하여 얻은 재조합 p plasmid(pHW20)에서 Cm 저항성이 획득되었다. pBD9 및 pBR322 상에 삽입된 두 절펀내에 Hinf, Taq I 빛 BglII의 제한효소 인식부위가 존재하였으며 이들 중 행III 인식부위에 의하여 Cm 저항성이 불활성 되었다.

  • PDF