• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2236-2245
• /
• 1997

The DBS system is being highlighted as actual area for the information societics. Specially, the DBS have been proposed very useful system to access the broading service in more widely sea. But the antenna tracking system for maritime DBS receiving is requried complicated control system because of the those complex motion represented pitching, rolling and yowing etc. Our resesrch target is a development of tracking system to the KOREASEA(MUGUNGWHA-1,2) for the applicated small size shipping. So our development focus was concentrated the two development direction. The first focus was represented low-cost system for popularization of small-size shipping around sea of the Korea peninsula. The second focus was an adaptive possibilities with domestic eqdupiment which was developed satellite receiving for KOREASAT. The anntenna mount is designed a compact size and easy operation use to the Az/El 2-axis type which is operated by step motor. And this mount type is very useful on a ship in the near sea of Korea peninsula. Basic tracking method is used th step-tracking algorithm, and the ship's moving compensation is adapted to the closed loop control method by ship's moving detection of gyro sensor. Control part is consists of converter, countertime, VCO, micro-computer and it's software. Testing the operation by the ship's moving simulator, and algorithm is designed tracking and moving compensation by receiving state.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.199-206
• /
• 2012

Attempt to use as a marker of natural objects directly in the real world, but there is a way to use the accelerometer of the smartphone, to convert the Frontal-View virtual, because it asks only the pitch of the camera, from the side there is a drawback that can not be converted to images. The proposed algorithm, to obtain the rotation matrix of axis 3 pitch, roll, yaw, we set the reference point of the yaw of the target image. Then, to compensate for the rotation matrix to determine Myon'inji any floor, wall, the ceiling of the target image. Finally, to obtain the homography matrix for obtaining the Frontal-View to account for the difference between the gyro sensor coordinate system and image coordinate system, so we can get the Frontal-View from the captured images through the projection transformation was designed. Was tested to convert Frontal-View the picture was taken in an environment smartphone environment surrounding floor, walls and ceiling in order to evaluate the conversion program Frontal-View has been implemented, in this paper, design and The conversion algorithm implementation, it was confirmed that to convert a regular basis Frontal-View footage taken from multiple angles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.157-163
• /
• 2020

Recently, fine dust has been known to cause cardiovascular diseases here, raising interest in ways to reduce emissions by efficiently using fuel from cars that cause air pollution. Accordingly, a driving assistance system was developed to save fuel by eco-driving and improve the driver's bad driving habits. The system was developed using raspberry pi, arduino and Android. Using RPM, speed, fuel injection information obtained from OBD-II, and gyro-sensor values, Fuel-Cut is induced to create an optimal inertial driving environment. It also provides various information system such as weather, driving environment, and preventing drowsy driving through GUI and voice recognition functions. It is possible to check driving records and vehicle fault information using Android application and has low overhead for message transmission using MQTT protocol optimized for IoT environment.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.150-156
• /
• 2007

In this paper, we focus on the fault detection and isolation(FDI) method for inertial navigation system with three two-degree of freedom dynamically tuned gyros(DTG) on orthogonal sensor configuration. we propose the FDI method which can detect the fault of each DTGs rather than the fault of each sensing axis. The proposed FDI method is separated into two FDI modules according to the fault magnitude in order to improve the reliability of fault detection information. For large fault detection, only instantaneous DTG measurement is used to detect a fault DTG within a short time. For small fault detection, the integrated value of DTG measurements are used to detect a fault DTG. It takes a more time to detect a fault but it serves more reliable fault detection information. Using the proposed FDI method with consideration of DTG fault characteristic, we could find out a fault DTG successfully.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.1-9
• /
• 2020

Purpose : The aim of this study was to compare the effects of the abdominal draw-in exercise (ADIE) and the dead bug exercise (DBE) on the pelvic anterior tilt angle and the activities of the gluteus maximus (GM), erector spinae (ES), and semi tendinosus (ST) during prone hip extension. Methods : A total of 22 female adults with weak abdominal muscles were divided into two groups: ADIE group (n=11) and DBE group (n=11). The muscle activities of the GM, ES, and ST along with the pelvic anterior tilt angle during prone hip extension were measured using a wireless surface electromyograph and gyro sensor before performing the prescribed exercise. Two groups conducted the assigned exercise for 10 minutes. After the exercise, their muscle activities and the pelvic anterior tilt angle were equally re measured. Results : In the DBE group, the muscle activity of GM was significantly increased after the intervention (p<0.05). However, there was no significant difference between the two groups in the amount of increase in the activity of GM (p>0.05). Moreover, in both groups, the activity of ES and the pelvic anterior tilt angle decreased significantly after the intervention (p<0.05) The decreased quantity in the pelvic anterior tilt angle and in the activity of ES showed no difference between the two groups (p>0.05). In the activity of ST, there was no significant difference within and between the two groups (p>0.05). Conclusion : Therefore, we suggest that ADIE and DBE are effective for women with weak abdominal muscles since the ES activity and pelvic anterior tilt angle are reduced during prone hip extension.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.8
• /
• pp.1080-1088
• /
• 2018

General methods of controlling a drone are divided into manual control and automatic control, which means a drone moves along the route. In case of manual control, a man should be able to figure out the location and status of a drone and have a controller to control it remotely. When people control a drone, they collect information about the location and position of a drone with the eyes and have its internal information such as the battery voltage and atmospheric pressure delivered through telemetry. They make a decision about the movement of a drone based on the gathered information and control it with a radio device. The automatic control method of a drone finding its route itself is not much different from manual control by man. The information about the position of a drone is collected with the gyro and accelerator sensor, and the internal information is delivered to the CPU digitally. The location information of a drone is collected with GPS, atmospheric pressure sensors, camera sensors, and ultrasound sensors. This paper presents an investigation into drone control by a remote computer. Instead of using the automatic control function of a drone, this approach involves a computer observing a drone, determining its movement based on the observation results, and controlling it with a radio device. The computer with a Depth camera collects information, makes a decision, and controls a drone in a similar way to human beings, which makes it applicable to various fields. Its usability is enhanced further since it can control common commercial drones instead of specially manufactured drones for swarm flight. It can also be used to prevent drones clashing each other, control access to a drone, and control drones with no permit.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.323-330
• /
• 2009

We have been developing an underwater robot for harbour construction using a parallel mechanism The robot is attached to the rope of a crane, which curries a large stone into the undersea The robot's yaw and pitch are controlled by hydraulic cylinders but its roll is uncontrollable. We mount propellers in both side of the robot to generate the roll motion This paper studies on the control for the roll motion of a underwater robot. A gyro-sensor is used to measure the angle in a roll motion We develop the dynamic model to describe the robot's roll motion by a second order non-linear system and identify the model parameters by recursive least square and adaptive identifier. PD control, recursive model based control and adaptive model based control are applied with the dynamic model which computes the control input to compensate disturbances. This paper introduces the underwater robot system and presents the simulated and experimental results of the proposed controller.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.49-56
• /
• 2018

As the era of the 4th industrial revolution comes, there is a growing interest in the use of UAVs. While various technologies are being developed using drones, controlling flight of drones is the most basic. Hovering control is essential in order to enable autonomous flight, especially during flight control of drones. In this paper, we design drones based on ATmega2560, Sonar, Optical Flow, and acceleration / gyro 6 axis sensor for drones hovering control, and developed horizontal control, altitude control, position tracking and fixed algorithm based on PID control. In this research, in order to measure the objective result of the drone, keeping the altitude immediately after the drone takes off according to the time, measure the movement value until the position is fixed and stable hovering is maintained and compared analyzed. Experimental results show that the drones can stably hover within 4cm horizontal and 2cm vertical from 50cm above the reference coordinates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1653-1659
• /
• 2022

Virtual reality content provides users with a high sense of immersion by using HMD devices. However, while wearing the HMD device, it is difficult to determine the user's location or distance from obstacles, resulting in injuries due to physical collisions. In this paper, we propose a reminder module to prevent accidents by notifying the risk of collision with obstacles while wearing the HMD device. The proposed module receives the user's state from the acceleration and gyro sensor and determines the motion that is likely to cause a collision. If there is an obstacle in the expected collision range, a buzzer sounds to the wearer. As a result of the experiment, the accuracy of obstacle detection in the state of wearing the HMD was 86.6% in the 1st stage and 83.3% in the 2nd stage, confirming the performance of the accident prevention reminder.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.415-417
• /
• 2020

무형문화유산의 전수 방식은 장인과 이수자의 직접적인 교육으로만 이루어져 왔으며 또한 전수는 긴 시간 동안 이루어지고 전수 방식을 따로 기록하는 경우가 드물며 동작이나 구전으로만 전해지기 때문에 표준화된 전수는 이루어질 수 없었다. 현재 국제 유네스코와 국내문화재청에서는 유무형문화재에 대한 전수와 기록의 중요성을 알고 다양한 디지털 기록을 진행하고 있다. 하지만 4차 산업혁명 시대에 무형유산 기록화 기술은 보유자의 기 예능 장인 공법을 기록하는 부분으로 영상기록 및 사진기록 도서 음원 등 아직까지 기존 아날로그 기술 방법으로 기록이 이루어지고 있으며 최근 5G 상용화와 함께 디지털 4차 산업 혁명시대와 발맞춰 무형유산 정보관리 기관에서도 무형유산 ICT 기반 기술 지원을 활성화되고 있는 시점에서 본 연구는 오랜 시간 동안 숙련도 높은 기술공법으로 한국 전통문화의 맥을 이어가고 있는 무형문화재 장인들의 기술 중에서 손을 사용하는 바느질 중심으로 자이로센서 기반으로 정확한 손동작 정보를 획득하고 기록할 수 있는 시스템 설계 및 연구개발을 통하여 ICT 기반 장인 공법 4D 기록화 기술을 제시하고자 한다. 이와 같은 기술로 무형문화유산의 새로운 4D 기록 방법으로 정확하게 기록하고 보존하여 무형문화유산 전승과 교육을 할 수 있고 문화유산의 유형에 맞는 교육·산업·홍보 등 다양한 사용 목적에 맞는 형태로 폭넓게 사용될 수 있다.