• 한국연초학회지
• /
• 제3권2호
• /
• pp.109-114
• /
• 1981

This experiment was conducted with three varieties (Hicks, Burley 21, Sohyang) and cropping systems (Improved mulching, Mulching, Non mulching) of NC 2326 to analyze growth kinetics by means of growth function involving its velocity and accelerated velocity. The basic growth data were obtained by harvest method at interval of ten days from transplanting to hundred days and analyzed by , regression equation, determinant of matrix, and differentiation. The plot of total dry weight of leaves, stalk and roots per a plant vs. time forms a sigmoid curve and its function fitted logistic satisfactorily. Tobacco plant grows at an accelerated velocity. And growth velocity, symmetric about an inflection point, is proportional to biomass attained and to the difference between biomass attained and the maximum, and to the decrease according to the biomass. Of varieties and cropping systems, the most maximum velocity was 9.58g per day per plant in mulching cultivation of NC 2326 and maximum accelerated velocity was 264mg per $day^2$ per plant in Burley 21.

• 품질경영학회지
• /
• 제32권4호
• /
• pp.265-273
• /
• 2004

We got the growth distance curve by spline smoothing method with observed marketing data and the growth velocity curve by the derivation of the growth distance curve. Using this growth velocity curve, we defined the several characteristic points which describe the variation of marketing data. In this paper, to specify several patterns of marketing data, we suggested characteristic function by using these characteristic points. In addition, we applied characteristic function to the seventeen brands of electric home products data.

• 대한한방소아과학회지
• /
• 제12권1호
• /
• pp.145-162
• /
• 1998

The purpose of this study was to determine the effects of oriental medical care on growth deficiency children. These cases were collected to investigate the effects of oriental medical care on growth deficiency children. So the cases were divided into 5 groups. The growth velocity was compared to a normal growth curve, and the results are as follows: 1. Oriental medical care was efficient when the epiphysial plates were not closed. 2. In female middle school beyond 1st grade students and in male middle school 3rd grade students who had almost closed epiphysial plates, the oriental medical care was not efficient and did not promote growth velocity. endothelium were used for the experiment using organ bath. 3. In the cases where the parent were very short, the effects of the oriental medical care to promote growth velocity was not efficient. 4. when we treated children of normal height, their growth velocity was over the normal growth curve. 5. In preschool aged children, oriental medical care was very efficient to promote children's growth. 6. The principle oriental medical care was to make balanced their body and digestive organs by using herb medicines that have the capability to promote the growth of the bones, and build strong muscles.

• 보건교육건강증진학회지
• /
• 제15권1호
• /
• pp.97-114
• /
• 1998

This study's purpose is to clarify the growth pattern of Down Syndrome cases -particulary centering on the adolescent growth pattern - and to draw up a standard growth chart on body height and weight which is one estimation of physical growth for the effective caring of their health. I sampled 269 Down syndrome cases (Male 151, Female 118) whose ages ranged from 6 years of age to adulthood and 348 normal control cases (Male 175, Female 173) who were in same age group with Down Syndrome. We also picked 124 Down syndromes cases(Male 70, Female 54) and gathered 8 year longitudinal data on their body height and weight. The results were that, I found Down syndrome cases' height to be short and their weight to be overweight. As far as age at peak height velocity was concerned, boys were at 11-12 years of age and girls were at 10-11 years of age, showing that girls were about one year faster. Peak height velocity was 6.8cm/yr for boys and 5.4cm/yr for girls. The age at peak weight velocity were 12-13 years for age for boys and 10-11 years of age for girls. Peak weight velocity was 5.7kg/yr for boys and 4.3kg/yr for girls. The menarche age of girls with Down syndrome was anticipated to come about 2 years after peak height velocity and peak weight velocity. Finally, we drew up a standard growth chart and compared it with that of the NCHS, which caused us to come to the conclusion that the Standard Growth Chart for Down syndrome cases in Korea that came out of this study was appropriate for the growth-assesment of Down syndrome.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.55-59
• /
• 2002

Delamination means that cracking occurs on the interface layer between composite laminates. In this paper, to predict the delamination growth in composite laminates subjected to low-velocity impact, the unit load method was introduced, and an eighteen-node 3-D finite element analysis, based on assumed strain mixed formulation, was conducted. Strain energy release rate, necessary to determine the delamination growth, was calculated by using the virtual crack closure technique. The unit load method saves the computation time more than the re-meshing method. The virtual crack closure technique enables the strain energy release rate to be easily calculated, because information of the singular stress field near the crack tip is not required. Hence, the delamination growth in composite laminates that are subjected to low-velocity impact can be efficiently predicted using the above-mentioned methods.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.21-25
• /
• 1998

An experimental investigation on flow pattern was carried out in molten Woods metal using an incorporated magnet probe to determine the velocity field in a Woods metal model of Czochralski crystal growth system. The local velocities in Woods metal were obtained 3-dimensionally at numerous positions of large crucible by measuring the voltage induced in the melt. Since there have not been a lot of the model experiments on the velocity distributions in the large size of melt with low Prandtl number for Czochralski crystal growth system, the present paper aims to give useful guidelines for e analysis of fluid flow in Czochralski growth system.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.197-209
• /
• 1985

To investigate the relationship between the pubertal spurt in body height and bone maturity of the hand-and-wrist in normal occlusion, the author X-rayed the hand-and-wrists of 1,141 students (male 614, female 527) and assessed their bone maturity. In this study, eleven skeletal stages were selected. The bones used to determine skeletal maturity were the ulnar sesamoid of the metacarpophalangeal joint of the first finger, the epiphyses of the proximal, middle, distal phalanges of the third finger, and middle phalanx of the fifth finger, and distal epiphysis of the radius. From the longitudinal data for height, an assessment was made of the change in growth velocity. The pubertal growth stage was divided into onset and peak height velocity phases. The results were as follows; 1. The onset of the pubertal growth was between the $PP_3=\;and\;MP_3=$ stage for boys, and between the $MP_3=\;and\;MP_5=$ stage for girls; the mean age of onset was 10.6 years for boys and 9.0 years for girls. 2. The peak height velocity was between the S and $MP_{3_{cap}}$ stage for boys, and between the $MP_{3_{cap}}$ and $MP_{5_{cap}}$ stage for girls; the mom age of peak height velocity was 12.5 years for boys and 10.9 years for girls. 3. As the stages of bone maturity progressed from $DP_{3u},\;to\;PP_{3u},\;MP_{3u}$, Ru, the peak height velocity had been reached, and the growth rate retarded, therefore the approach to full physical maturity was attained. 4. The evidence for the period of onset, peak height velocity and bone maturation suggested that girls were in advance of boys. During the latter part of pubertal growth, the rate of boys' bone maturation was faster than that of girls'.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.435-440
• /
• 2001

The purpose of this study was to evaluate mesh size and water velocity for the growth of filamentous periphytic algae(FPA). The growth experiment was carried out in the constructed pilot waterway system with nutrient-rich treated wastewater. Growth rate of FPA was highest at water velocity about 10 cm/s. The maximum standing crop of FPA was $253\;{\mu}g\;chl.a/cm^{3}$, and an average of the net productivity was $3.92\;mgDW/cm^{2}/day\;or\;25.3\;{\mu}g\;chl.a/cm^{2}/day$. Biomass development and growth rates of FPA were highest at the net with 20mm mesh size during the fall season and 10mm mesh size during the winter season.

• 대한한방소아과학회지
• /
• 제19권2호
• /
• pp.165-174
• /
• 2005

Objectives : The purpose of this study was to suggest a new method for measurement of children's growth development Ultrasound transonic velocity of inferior radiocarpal joint has some advantages that it is harmless to human body and apply a new analysis algorithm, it can be used for the diagnosis of bone age. Methods: This clinical study have been carried out with the 117 case(male 68, female 49) of the children aged 5 to 16 years old who visited in Department of Pediatrics, ${\bigcirc}{\bigcirc}$ university Oriental Hospital. Bone maturity is measured by Ultrasound transonic velocity and X-ray image of growth plate in inferior radiocarpal joint. This study were designed to investigate the relationship of the bone age by Ultrasound transonic velocity and X-ray image. Result & Conclusion : The maturity of growth plate of inferior radiocarpal joint was correlated with age, height, weight, BMI in this study(P<0.001). The Ultrasound transonic velocity of inferior radiocarpal joint are sufficient diagnostic worth as an index to predict bone maturity.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.169-172
• /
• 1998

A phyaical model of the Czochralski method for silicon single crystals is designed to measure the change of velocities and temperature profilles in the melt. Wood's metal(Bi 50%, Pb 26.7%, Sn 13.3%, Cd 10%, m.p. 70℃) is used to simulate the silicon melt in the crucible. To measure the local velocity change, electromagnetic probe is adopted as a velocity sensor. The output voltage of the sensor shows linear relationship to the velocity of the melt.