• Journal of Environmental Impact Assessment
• /
• v.19 no.2
• /
• pp.107-116
• /
• 2010

In this research potential liquation of contaminants from surrounding soil to a reservoir in an island was studied to investigate the cause and route of contamination of Baengyeong-myeon reservoir. Soil of Baengyeong-myeon reservoir consists of $SiO_2$ and has a high iron content because of geological characteristics of its country rock. From the field investigation and simulation study it was found that highly accumulated carbon content in the reservoir sediment was incurred from ground water, which provides a good habitat for microbes. And the liquation, the cause of organics growth, occurs mainly on the bottom of the reservoir consisting marine clay layer once used as farmland. So dredging of the sediment of reservoir and replacing with valley soil is suggested to prevent continuous contamination of a reservoir in an island due to COD production.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.117-123
• /
• 2008

In this study, PHABSIM which is a sample for 1D physical habitat and River2D, which is a sample for 2D physical habitat were applied to the main streams of Han River in order to calculate an optimum flow considering the habitats of fishes in determining the instream flow. Moreover, the Weighted Usable Area (WUA) of the two samples in each growth step (adults and spawning) of the target fish type was compared and reviewed. The optimal flow value was calculated by considering the conditions for inhabiting fishes. As a result of the correlation analysis for WUA from 1D and 2D samples was 0.87 to 0.99. The optimum flow considering the conditions of inhabiting fishes showed insignificant difference of $3m^3/s\;to\;5m^3/s$ with the exception of adults in Moon-Mak and spawning in Dal-Chun.

• Journal of Broadcast Engineering
• /
• v.8 no.4
• /
• pp.437-451
• /
• 2003

With the rapid growth of internet technologies and wide availability of multimedia computing facilities, the enforcement of multimedia copyright protection becomes an important issue. Digital watermarking is viewed as an effective way to deter content users from illegal distributions. In recent years, digital watermarking has been intensively studied to achieve this goal. However, when the watermarked media is transmitted over the channels modeled as the additive white Gaussian noise (AWGN) channel, the watermark information is often interfered by the channel noise and produces a large number of errors. So many error-correcting codes have been applied in the digital watermarking system to protect the embedded message from the disturbance of the noise, such as BCH codes, Reef-Solomon (RS) codes and Turbo codes. Recently, low-density parity-check (LDPC) codes were demonstrated as good error correcting codes achieving near Shannon limit performance and outperforming turbo codes nth low decoding complexity. In this paper, in order to mitigate the channel conditions and improve the quality of watermark, we proposed the application of LDPC codes on implementing a fairly robust digital image watermarking system. The implemented watermarking system operates in the spectrum domain where a subset of the discrete wavelet transform (DWT) coefficients is modified by the watermark without using original image during watermark extraction. The quality of watermark is evaluated by taking Into account the trade-off between the chip-rate and the rate of LDPC codes. Many simulation results are presented in this paper, these results indicate that the quality of the watermark is improved greatly and the proposed system based on LDPC codes is very robust to attacks.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3723-3731
• /
• 2000

Recently, the growth of applications and services over high-speed Internet increase, ATM networks as wide area back-bone has been a major solution. The conventional TCP suite is still the standard protocol used to support upper application on current Internet and uses a window based protocol for flow control in the transport layer. When TCP data uses the UBR service in ATM layer, the control method is also buffer management. If a cell is discarded in ATM layer. one whole packet of TCP will be lost. Which is responsible for most TCP performance degradation and do not offer sufficiently QoS. To solve this problem, Several dropping strategies, such as Tail Drop, EPD, PPO, SPD, FBA, have been proposed to improve the TCP performance over ATM. In this paper, to improve the TCP fairness of end to end, we propose a packet dropping scheme algorithm using two fixed threshold. Under similar condition, we compared our proposed scheme with other dropping strategies. Although the number of VC is increased, simulation results showed that the proposed scheme can allocate more fairly each VC than other schemes.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.53-61
• /
• 2012

This study developed a growth model for Larix leptolepis based on the WLS model to examine the effects of climate change on them. The site index was chosen as the dependent variable and location, weather, and edaphic factor were chosen as independent variables. Simulations were performed under three A1B climate change scenarios with the temperature ranging from $-3.3^{\circ}C$ to $+3.3^{\circ}C$. The simulation results showed that the site index decreased with peak at $-0.8^{\circ}C$. The decrease level of the site index by region was also analyzed. Each scenario, site index has decreased mostly but some region was increased. When the temperature increased up to $3^{\circ}C$, site index was decreased to everywhere.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.12
• /
• pp.979-984
• /
• 2016

Recently, ball screws have been used in machine tools, robot parts, and medical instruments. The demand for ball screws of high precision and reduced size is increasing because of the growth of high value-added industries. Three types of ball screws are typically used: deflector type, end-cap type, and tube type. They are also classified from C0 to C9 according to the precision level. A deflector type ball screw can reduce the variation of rotational torque and the size of the nut of the ball screw is minimized. To ensure the reliable design of ball screws, it is important to perform a structural analysis. The purpose of this study is to perform a stability evaluation through analysis of a deflector type miniature ball screw for weapon systems. The analysis is performed through Finite Elements Method (FEM) simulation to predict characteristics such as deformation, stress, and thermal effects. The interference between the shaft and the deflector for smooth rotation are also studied. Based on the results of the analysis, the development of the deflector type miniature ball screw for weapon systems is performed.

• 사회경제평론
• /
• no.38
• /
• pp.9-49
• /
• 2012

Our luck is brute if we cannot choose or control it and, thus, we are not responsible for it. Our luck is optional if we can choose or control it and, thus, we are responsible for it. Egalitarian justice at least demands brute luck be fully neutralized. If, however, brute luck is not fully neutralized and possibly accumulated, what will happen to the Gini coefficients as a measure of inequality due to brute luck? By simulating brute luck under various combinations of the rate of accumulation and the level of, what I call, leximin-redistribution, I obtain the Gini coefficients for the distribution of the accumulated and, then, redistributed brute luck. The level of the leximin-redistribution determines the negative or positive relation between the rate of accumulation and the Gini coefficient. The minimum leximin-redistribution level that generates the negative relation between the rate of accumulation and the Gini coefficient, depends on the characteristics of the starting-point distribution of brute luck. The sooner the leximin-redistribution is ushered in, the lower the minimum level becomes. The so-called 'Growth First Redistribution Later' policy may hurt victims of brute bad luck.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.198-198
• /
• 2016

The Citarum River Basin is the biggest river basin in West Java Province, Indonesia and it plays strategic roles in providing water for irrigation, domestic and industrial uses, and power generation, besides controlling the flood during rainy season. Flowing through seven major cities makes the river flow and water demand are vulnerable to land use change around the river. The present water resources management has involved the regulator, operator, and users in deciding an appropriate water management plan for the entire basin. The plan includes an operation plan for three reservoirs, construction or maintenance of the river channel, and water allocation for all users along the river. Following this plan, a smaller operation group will execute and evaluates the plan based on the actual flow condition. Recently, a deforestation, environment degradation, river sedimentation, a rapid growth of population and industry, also public health become new issues that should be considered in water basin planning. Facing these arising issues, a new development program named ICWRMIP was established to advance the existing management system. This program includes actions to strengthen institutional collaboration, do the restoration and conservation of the river environment, improve water quality and public health, also advance the water allocation system. At present, the water allocation plan is created annually based on a forecasted flow data and water usage prediction report. Sometimes this method causes a difficulty for the operator when the actual flow condition is not the same as the prediction. Improving existing system, a lot of water allocation studies, including a development of the database and water allocation simulation model have been placed to help stakeholders decide the suitable planning schemes. In the future, this study also tries to contribute in advancing water allocation planning by creating an optimization model which ease stakeholders discover a suitable water allocation plan for individual users.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.220-220
• /
• 2015

Water, energy, and food security already became a risk that threatens people around the world. Increasing of resources demand, rapid urbanization, decreasing of natural resources and climate change are four major problems inducing resources' scarcity. Indeed, water, energy, and food are interconnected each other thus cannot be analyzed separately. That is, for simple example, energy needs water as source for hydropower plant, water needs energy for distribution, and food needs water and energy for production, which is defined as W-E-F nexus. Due to their complicated linkage, it needs a computer model to simulate and analyze the nexus. Development of a computer simulation model using system dynamics approach makes this linkage possible to be visualized and quantified. System dynamics can be defined as an approach to learn the feedback connections of all elements in a complex system, which mean, every element's interaction is simulated simultaneously. Present W-E-F nexus models do not calculate and simulate the element's interaction simultaneously. Existing models only calculate the amount of water and energy resources that needed to provide food, water, or energy without any interaction from the product to resources. The new proposed model tries to cope these lacks by adding the interactions, climate change effect, and government policy to optimize the best options to maintain the resources sustainability. On this first phase of development, the model is developed only to learn and analyze the interaction between elements based on scenario of fulfilling the increasing of resources demand, due to population growth. The model is developed using the Vensim, well-known system dynamics model software. The results are amount of total water, energy, and food demand and production for a certain time period and it is evaluated to determine the sustainability of resources.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.186-197
• /
• 2019

Purpose: This study intends to develop a nonlinear cyclic plasticity damage model in the framework of finite element formulation, which is capable of taking large deformation effects into account, in order to accurately predict the hysteretic behavior of stainless steel structures. Method: The new cyclic constitutive equations that utilize the combined isotropic-kinematic hardening rule for plastic deformation is incorporated into the damage mechanic model in conjunction with the large strain formulation. The damage growth law is based on the experimental observations that the evolution of microvoids yields nonlinear damage accumulation with plastic deformation. The damage model parameters and the procedure for their identification are presented. Results and Conclusion: The proposed nonlinear damage model has been verified by simulating uniaxial strain-controlled monotonic and cyclic loading tests, and successfully applied to a thin-walled stainless steel pipe subjected to constant and alternating strain-controlled cyclic loadings.