• Journal of Microbiology and Biotechnology
• /
• 제8권3호
• /
• pp.291-294
• /
• 1998

Transfer of Candida albicans grown in Sabouraud medium to the RPMI medium induces the transition from a nonpathogenic yeast form to a pathogenic hyphal form. This transition was severely inhibited in a dose-dependent manner when deer antler extract was added to the RPMI medium in a nontoxic range (up to $500{\mu}g$). In that range, deer antler extract inhibited the hyphal transition and cell growth, whereas no effect was observed on the yeast growth. When hydrophobic or hydrophilic fractions were prepared by detergent-solubilization of deer antler extract, the hydrophobic fraction showed a large degree of inhibition of the hyphal growth in Candida albicans. Neither fraction affected the growth in the yeast form. The pattern of chitin localization in the culture of the yeast form grown in RPMI in the presence of deer antler extract was confirmed by calcofluor staining and this exhibited strongly the suppression of hyphal transition.

• 아시안잔디학회지
• /
• 제11권4호
• /
• pp.271-280
• /
• 1997

The short green period of zoysiagrass has been a problem in using for turf. This study was performed to check growth response of several wintergrasses under sunny and shady area in Korea. Wintergrasses of 5 species, 27 cultivars introduced from U.S.D.A., were used in this study. After establishment, two fluctuations of top growth were observed which varied according to the species; first, due to drought in May, second, due to high temperature and humidity from July to August. Red fescues and perennial ryegrasses showed severe growth retardation in sunny area during summer period. Kentucky bluegrasses and tall fescues maintained good Qualities nearly all the year round arid showed slight disease infections. Kentucky bluegrass 'Kenblue' and red fescue 'Agram' grown under shady area showed higher photosynthetic ability than under sunny area, except the temperature range from 30˚C to 40 ˚C under 40,000 lux light in red fescue 'Agram'. And the phorosynthesis was decreased at the temperature range from 35 ˚C to 40 ˚C. Key words: Wintergrass, Top growth, Visual rating, Photosynthesis, Poa pratensis. Festuca arundinacea, Pestuca rubra. Lolium perenne, Agrostis stolonifera.

• Journal of Nutrition and Health
• /
• 제44권3호
• /
• pp.212-221
• /
• 2011

This study was conducted to identify differences in growth based on the obesity index in sixth grade. Heights and weights of 141 students from first to sixth grades were collected from school records. Other information was gathered by survey, and the weight length index (WLI) was calculated. Subjects were classified into three groups: underweight (n = 57, UG), normal (n = 53, NG), and obese (n = 31, OG) using the WLI. Differences in weight, height, and growth velocity were compared among the three groups from the first to sixth grades. With regard to growth, the past physical status of the three groups was maintained. More than 50% of the OG was in the overweight range when they were in the third to fifth grades. Approximately 60% of NG was in the normal weight range between the first and fifth grades. More than 70% of UG was in the underweight range when they were in the first to fifth grades (p < 0.001). Growth velocity was faster in OG than that in NG and UG (p < 0.001). The annual growth rate of children was the highest when they moved from the third to the fourth grade (p < 0.001). The results indicate that general balanced diet education should be implemented in lower grades, because physical growth formed in lower grades tended to be maintained in senior grades. It would be better to educate students about diet to prevent obesity before the fifth grade when a major change in body structure has occurred.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.76-88
• /
• 1997

Constant .DELTA.K fatigue crack growth rate experiments were performed by applying an intermediate single and multiple overload for structural steel, SM45C. The purpose of the present study is to investigate the influence of multiple overloads at various stress intensity factor ranges and the effect of statistical variability of crack retardation behavior. The normalized delayed load cycle, delayed crack length and the minimum crack growth rate are increased with increasing baseline stress intensity factor range when the overload ratio and the number of overload application were constant. The crack retardation under low baseline stress intensity factor range increases by increasing the number of overload application, but the minimum crack growth rate decreases by increasing the number of overload application. A strong linear correlation exists between the minimum crack growth rate and the number of overload applications. And, it was observed that the variability in the crack growth retardation behavior are presented, the probability distribution functions of delayed load cycle, delayed crack length and crack growth life are 2-parameter Weibull. The coefficient of variation of delayed load cycle and delayed crack length for the number of 10 overload applications data are 14.8 and 9.2%, respectively.

• 미생물학회지
• /
• 제16권4호
• /
• pp.155-160
• /
• 1978

Nutritional requirements for the growth of Cellulomonas flavigena were studied. C. flavigena grew well on cellulose when 0.005% or more of yeast extract was present in the growth medium. The growth factor in yeast extrct was, in part, thiamine and biotin. Amino acids had little effect on the growth on the organism. The extent of growth on yeast extract was much higher than that obtained on those vitamins, which indicates the presence of growth factors in yeast extract besides the vitamins, among the carbohydrates tested, the organism grew best on glucose and galactose, and the optimum N/P ratio was within the range of 0.75~3.17.

• 한국재료학회지
• /
• 제6권6호
• /
• pp.561-567
• /
• 1996

The grain size effect on grain boyndary cracking in Pb-Sn eutectic during isothermal fatigue was investigated. Fatigue experiments were confined to two conditions : (1) 0.4% total strain range(approximetely 0.2% plastic strain range), 1.67$\times$10$^{-3}$/s frequency; and (2) 1.5% total strain rante(approximately 1.2% plastic strain range), 8.33$\times$10$^{-4}$/s frequency. Fatigue specimens were cross-sectioned to monitor the depth of crack growth continuosly and then, the maximum crack depths in units of the number of boundaries were plotted as functions of number of cycles for these two different strain ranges. The results revealed that the rate of crack growth(per cycle at fixed rate of crosshead motion) can be expressed as dc/dN=($\Delta$$\varepsilon$$_p$)$^n$c where n is typically 2, c is the crack length, $\Delta$$\varepsilon$$_p$ is the plastic strain range, and A is a "constant" that depends on whether the crack is deeper or shallower than its first triple point of the grain boundary, A decrdases by about a factor of three after the crack hits the first triple point, indecating that the fatigue crack is trapped at the triple point of the grain boundaries.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.282-286
• /
• 2001

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature, low temperature and high temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room, low temperature and high temperature at $25^{\circ}C$,$-30^{\circ}C$,$-50^{\circ}C$,$-70^{\circ}C$ and $-100^{\circ}C$ in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range $\Delta K_{th}$ in the early stage of fatigue crack growth (Region I ) and stress intensity factor range $\Delta K$ in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.167-172
• /
• 2002

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature, high temperature experiment. And ire got the following characteristics from fatigue crack growth test carried out in the environment of room, and high temperature at $25^{\circ}C,\;100^{\circ}C,\;150^{\circ}C$ and $180^{\circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. The threshold stress intensity factor range ${\Delta}Kth$ in the early stage of fatigue crack growth (Region I) and stress intensity (actor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.62-69
• /
• 1986

본 연구에서는 표면균열의 전파거동에 관한 연구의 일환으로 경량화재료 로서 항공기 구조용으로 널리 사용되고 있는 7075-T651 알루미늄합금을 준비하고 제하탄성 compliance법을 이용하여 표면 및 깊이 방향의 균열진전거동의 특성을 밝히고져 한다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.65-70
• /
• 2001

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature, low temperature and high temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room, low temperature and high temperature at $25^{\circ}C$, -3$0^{\circ}C$, -5$0^{\circ}C$, -7$0^{\circ}C$, -10$0^{\circ}C$ and 5$0^{\circ}C$, 10$0^{\circ}C$ , 15$0^{\circ}C$, 18$0^{\circ}C$ and in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range $\DeltaK_{th}$ in the early stage of fatigue crack growth (Region I ) and stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.